[28déc. 18:18] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ +0,000000] Linux version 6.1.0-16-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.67-1 (2023-12-12) [ +0,000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64 root=/dev/mapper/vg0-system ro quiet [ +0,000000] BIOS-provided physical RAM map: [ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ +0,000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ +0,000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d1c97fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d1c98000-0x00000000d1c9efff] ACPI NVS [ +0,000000] BIOS-e820: [mem 0x00000000d1c9f000-0x00000000d20d0fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d20d1000-0x00000000d2568fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000d2569000-0x00000000d7ee7fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d7ee8000-0x00000000d7ffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d8761fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d8762000-0x00000000d87fffff] type 20 [ +0,000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8faefff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d8faf000-0x00000000d8ffffff] ACPI data [ +0,000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71cfff] usable [ +0,000000] BIOS-e820: [mem 0x00000000da71d000-0x00000000da7fffff] ACPI NVS [ +0,000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbe10fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000dbe11000-0x00000000dbffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable [ +0,000000] NX (Execute Disable) protection: active [ +0,000000] efi: EFI v2.31 by American Megatrends [ +0,000000] efi: ACPI=0xd8fef000 ACPI 2.0=0xd8fef000 SMBIOS=0xf04c0 MOKvar=0xd7f23000 [ +0,000000] secureboot: Secure boot disabled [ +0,000000] SMBIOS 2.7 present. [ +0,000000] DMI: Dell Inc. OptiPlex 9020M/0Y5DDC, BIOS A05 03/22/2015 [ +0,000000] tsc: Fast TSC calibration using PIT [ +0,000000] tsc: Detected 3092.924 MHz processor [ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ +0,000002] e820: remove [mem 0x000a0000-0x000fffff] usable [ +0,000010] last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 [ +0,000094] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ +0,000443] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ +0,000005] last_pfn = 0xdbe11 max_arch_pfn = 0x400000000 [ +0,007212] found SMP MP-table at [mem 0x000fd890-0x000fd89f] [ +0,000027] Using GB pages for direct mapping [ +0,001094] RAMDISK: [mem 0x308b1000-0x3444ffff] [ +0,000005] ACPI: Early table checksum verification disabled [ +0,000002] ACPI: RSDP 0x00000000D8FEF000 000024 (v02 DELL ) [ +0,000003] ACPI: XSDT 0x00000000D8FEF088 000094 (v01 DELL CBX3 01072009 AMI 00010013) [ +0,000005] ACPI: FACP 0x00000000D8FF9168 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ +0,000004] ACPI: DSDT 0x00000000D8FEF1B0 009FB1 (v02 DELL CBX3 00000014 INTL 20091112) [ +0,000003] ACPI: FACS 0x00000000DA7FE080 000040 [ +0,000002] ACPI: APIC 0x00000000D8FF9278 000072 (v03 DELL CBX3 01072009 AMI 00010013) [ +0,000003] ACPI: FPDT 0x00000000D8FF92F0 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ +0,000002] ACPI: SLIC 0x00000000D8FF9338 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ +0,000002] ACPI: SSDT 0x00000000D8FF94B0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ +0,000003] ACPI: SSDT 0x00000000D8FF99F0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ +0,000002] ACPI: SSDT 0x00000000D8FFA4C8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) [ +0,000003] ACPI: HPET 0x00000000D8FFA690 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ +0,000002] ACPI: SSDT 0x00000000D8FFA6C8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ +0,000003] ACPI: MCFG 0x00000000D8FFAA38 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ +0,000002] ACPI: SSDT 0x00000000D8FFAA78 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ +0,000003] ACPI: ASF! 0x00000000D8FFDFA0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ +0,000002] ACPI: MSDM 0x00000000D8FFE048 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ +0,000003] ACPI: BGRT 0x00000000D8FFE0A0 000038 (v00 \xf3\xee 01072009 AMI 00010013) [ +0,000002] ACPI: Reserving FACP table memory at [mem 0xd8ff9168-0xd8ff9273] [ +0,000002] ACPI: Reserving DSDT table memory at [mem 0xd8fef1b0-0xd8ff9160] [ +0,000001] ACPI: Reserving FACS table memory at [mem 0xda7fe080-0xda7fe0bf] [ +0,000000] ACPI: Reserving APIC table memory at [mem 0xd8ff9278-0xd8ff92e9] [ +0,000001] ACPI: Reserving FPDT table memory at [mem 0xd8ff92f0-0xd8ff9333] [ +0,000001] ACPI: Reserving SLIC table memory at [mem 0xd8ff9338-0xd8ff94ad] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ff94b0-0xd8ff99e8] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ff99f0-0xd8ffa4c7] [ +0,000000] ACPI: Reserving SSDT table memory at [mem 0xd8ffa4c8-0xd8ffa68e] [ +0,000001] ACPI: Reserving HPET table memory at [mem 0xd8ffa690-0xd8ffa6c7] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ffa6c8-0xd8ffaa34] [ +0,000001] ACPI: Reserving MCFG table memory at [mem 0xd8ffaa38-0xd8ffaa73] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ffaa78-0xd8ffdf9f] [ +0,000001] ACPI: Reserving ASF! table memory at [mem 0xd8ffdfa0-0xd8ffe044] [ +0,000000] ACPI: Reserving MSDM table memory at [mem 0xd8ffe048-0xd8ffe09c] [ +0,000001] ACPI: Reserving BGRT table memory at [mem 0xd8ffe0a0-0xd8ffe0d7] [ +0,000061] No NUMA configuration found [ +0,000001] Faking a node at [mem 0x0000000000000000-0x000000021edfffff] [ +0,000009] NODE_DATA(0) allocated [mem 0x21edd5000-0x21edfffff] [ +0,000231] Zone ranges: [ +0,000001] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ +0,000001] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ +0,000002] Normal [mem 0x0000000100000000-0x000000021edfffff] [ +0,000001] Device empty [ +0,000001] Movable zone start for each node [ +0,000002] Early memory node ranges [ +0,000001] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ +0,000001] node 0: [mem 0x0000000000059000-0x000000000009efff] [ +0,000001] node 0: [mem 0x0000000000100000-0x00000000d1c97fff] [ +0,000001] node 0: [mem 0x00000000d1c9f000-0x00000000d20d0fff] [ +0,000000] node 0: [mem 0x00000000d2569000-0x00000000d7ee7fff] [ +0,000001] node 0: [mem 0x00000000d8000000-0x00000000d8761fff] [ +0,000001] node 0: [mem 0x00000000d8800000-0x00000000d8faefff] [ +0,000000] node 0: [mem 0x00000000d9000000-0x00000000da71cfff] [ +0,000001] node 0: [mem 0x00000000da800000-0x00000000dbe10fff] [ +0,000001] node 0: [mem 0x0000000100000000-0x000000021edfffff] [ +0,000001] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] [ +0,000004] On node 0, zone DMA: 1 pages in unavailable ranges [ +0,000002] On node 0, zone DMA: 1 pages in unavailable ranges [ +0,000033] On node 0, zone DMA: 97 pages in unavailable ranges [ +0,009685] On node 0, zone DMA32: 7 pages in unavailable ranges [ +0,000279] On node 0, zone DMA32: 1176 pages in unavailable ranges [ +0,000027] On node 0, zone DMA32: 280 pages in unavailable ranges [ +0,000026] On node 0, zone DMA32: 158 pages in unavailable ranges [ +0,000069] On node 0, zone DMA32: 81 pages in unavailable ranges [ +0,000069] On node 0, zone DMA32: 227 pages in unavailable ranges [ +0,000572] On node 0, zone Normal: 16879 pages in unavailable ranges [ +0,000055] On node 0, zone Normal: 4608 pages in unavailable ranges [ +0,000011] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ +0,000061] ACPI: PM-Timer IO Port: 0x1808 [ +0,000006] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ +0,000014] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ +0,000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ +0,000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ +0,000004] ACPI: Using ACPI (MADT) for SMP configuration information [ +0,000001] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ +0,000009] e820: update [mem 0xd04b5000-0xd04e9fff] usable ==> reserved [ +0,000012] TSC deadline timer available [ +0,000001] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ +0,000027] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd04b5000-0xd04e9fff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xd1c98000-0xd1c9efff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd20d1000-0xd2568fff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd7ee8000-0xd7ffffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd8762000-0xd87fffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd8faf000-0xd8ffffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xda71d000-0xda7fffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xdbe11000-0xdbffffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ +0,000002] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ +0,000001] Booting paravirtualized kernel on bare hardware [ +0,000002] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ +0,004003] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ +0,000312] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ +0,000008] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ +0,000002] pcpu-alloc: [0] 0 1 2 3 [ +0,000030] Fallback order for Node 0: 0 [ +0,000003] Built 1 zonelists, mobility grouping on. Total pages: 2041077 [ +0,000002] Policy zone: Normal [ +0,000001] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64 root=/dev/mapper/vg0-system ro quiet [ +0,000041] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64", will be passed to user space. [ +0,000025] random: crng init done [ +0,000692] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ +0,000339] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ +0,000043] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ +0,000004] software IO TLB: area num 4. [ +0,033464] Memory: 3494828K/8294548K available (14342K kernel code, 2331K rwdata, 9048K rodata, 2792K init, 17416K bss, 429044K reserved, 0K cma-reserved) [ +0,000125] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ +0,000013] Kernel/User page tables isolation: enabled [ +0,000032] ftrace: allocating 40157 entries in 157 pages [ +0,006077] ftrace: allocated 157 pages with 5 groups [ +0,000600] Dynamic Preempt: voluntary [ +0,000027] rcu: Preemptible hierarchical RCU implementation. [ +0,000001] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ +0,000001] Trampoline variant of Tasks RCU enabled. [ +0,000000] Rude variant of Tasks RCU enabled. [ +0,000001] Tracing variant of Tasks RCU enabled. [ +0,000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ +0,000001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ +0,003825] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ +0,000181] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ +0,000060] Console: colour dummy device 80x25 [ +0,000018] printk: console [tty0] enabled [ +0,000014] ACPI: Core revision 20220331 [ +0,000085] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ +0,000015] APIC: Switch to symmetric I/O mode setup [ +0,000351] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ +0,019653] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c952b3532c, max_idle_ns: 440795295899 ns [ +0,000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.84 BogoMIPS (lpj=12371696) [ +0,000022] CPU0: Thermal monitoring enabled (TM1) [ +0,000023] process: using mwait in idle threads [ +0,000002] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ +0,000001] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ +0,000003] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ +0,000001] Spectre V2 : Mitigation: Retpolines [ +0,000001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ +0,000001] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ +0,000000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ +0,000001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ +0,000001] Spectre V2 : User space: Mitigation: STIBP via prctl [ +0,000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ +0,000003] MDS: Mitigation: Clear CPU buffers [ +0,000000] MMIO Stale Data: Unknown: No mitigations [ +0,000001] SRBDS: Mitigation: Microcode [ +0,000005] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ +0,000001] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ +0,000001] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ +0,000001] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ +0,000001] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ +0,011478] Freeing SMP alternatives memory: 36K [ +0,000003] pid_max: default: 32768 minimum: 301 [ +0,003077] LSM: Security Framework initializing [ +0,000013] landlock: Up and running. [ +0,000001] Yama: disabled by default; enable with sysctl kernel.yama.* [ +0,000021] AppArmor: AppArmor initialized [ +0,000002] TOMOYO Linux initialized [ +0,000005] LSM support for eBPF active [ +0,000025] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ +0,000014] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ +0,000342] smpboot: CPU0: Intel(R) Core(TM) i3-4160T CPU @ 3.10GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ +0,000096] cblist_init_generic: Setting adjustable number of callback queues. [ +0,000001] cblist_init_generic: Setting shift to 2 and lim to 1. [ +0,000013] cblist_init_generic: Setting adjustable number of callback queues. [ +0,000001] cblist_init_generic: Setting shift to 2 and lim to 1. [ +0,000010] cblist_init_generic: Setting adjustable number of callback queues. [ +0,000000] cblist_init_generic: Setting shift to 2 and lim to 1. [ +0,000010] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ +0,000035] ... version: 3 [ +0,000000] ... bit width: 48 [ +0,000001] ... generic registers: 4 [ +0,000001] ... value mask: 0000ffffffffffff [ +0,000001] ... max period: 00007fffffffffff [ +0,000000] ... fixed-purpose events: 3 [ +0,000001] ... event mask: 000000070000000f [ +0,000115] signal: max sigframe size: 1776 [ +0,000013] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ +0,000016] rcu: Hierarchical SRCU implementation. [ +0,000000] rcu: Max phase no-delay instances is 1000. [ +0,000455] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ +0,000048] smp: Bringing up secondary CPUs ... [ +0,000070] x86: Booting SMP configuration: [ +0,000000] .... node #0, CPUs: #1 #2 [ +0,000059] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ +0,000000] #3 [ +0,000200] smp: Brought up 1 node, 4 CPUs [ +0,000000] smpboot: Max logical packages: 1 [ +0,000000] smpboot: Total of 4 processors activated (24743.39 BogoMIPS) [ +0,015092] node 0 deferred pages initialised in 12ms [ +0,000843] devtmpfs: initialized [ +0,000000] x86/mm: Memory block size: 128MB [ +0,000449] ACPI: PM: Registering ACPI NVS region [mem 0xd1c98000-0xd1c9efff] (28672 bytes) [ +0,000000] ACPI: PM: Registering ACPI NVS region [mem 0xda71d000-0xda7fffff] (929792 bytes) [ +0,000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ +0,000000] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ +0,000000] pinctrl core: initialized pinctrl subsystem [ +0,000012] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ +0,000139] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ +0,000097] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ +0,000095] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ +0,000013] audit: initializing netlink subsys (disabled) [ +0,000017] audit: type=2000 audit(1703783934.052:1): state=initialized audit_enabled=0 res=1 [ +0,000000] thermal_sys: Registered thermal governor 'fair_share' [ +0,000000] thermal_sys: Registered thermal governor 'bang_bang' [ +0,000000] thermal_sys: Registered thermal governor 'step_wise' [ +0,000000] thermal_sys: Registered thermal governor 'user_space' [ +0,000000] thermal_sys: Registered thermal governor 'power_allocator' [ +0,000000] cpuidle: using governor ladder [ +0,000000] cpuidle: using governor menu [ +0,000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ +0,000000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ +0,000000] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ +0,000000] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ +0,000000] PCI: Using configuration type 1 for base access [ +0,000000] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ +0,000000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ +0,000000] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ +0,000000] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ +0,000000] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ +0,000000] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ +0,000000] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ +0,000000] ACPI: Added _OSI(Module Device) [ +0,000000] ACPI: Added _OSI(Processor Device) [ +0,000000] ACPI: Added _OSI(3.0 _SCP Extensions) [ +0,000000] ACPI: Added _OSI(Processor Aggregator Device) [ +0,008772] ACPI: 6 ACPI AML tables successfully acquired and loaded [ +0,000609] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ +0,000548] ACPI: Dynamic OEM Table Load: [ +0,000006] ACPI: SSDT 0xFFFF973CC0997C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ +0,000461] ACPI: Dynamic OEM Table Load: [ +0,000004] ACPI: SSDT 0xFFFF973CC088C000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ +0,000484] ACPI: Dynamic OEM Table Load: [ +0,000004] ACPI: SSDT 0xFFFF973CC0A25C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ +0,000763] ACPI: Interpreter enabled [ +0,000023] ACPI: PM: (supports S0 S3 S4 S5) [ +0,000001] ACPI: Using IOAPIC for interrupt routing [ +0,000020] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ +0,000001] PCI: Using E820 reservations for host bridge windows [ +0,000133] ACPI: Enabled 7 GPEs in block 00 to 3F [ +0,007559] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ +0,000006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ +0,003797] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ +0,000391] PCI host bridge to bus 0000:00 [ +0,000002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ +0,000002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ +0,000002] pci_bus 0000:00: root bus resource [bus 00-3e] [ +0,000016] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ +0,000060] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000 [ +0,000007] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ +0,000005] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ +0,000003] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ +0,000009] pci 0000:00:02.0: BAR 2: assigned to efifb [ +0,000003] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ +0,000069] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ +0,000006] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ +0,000083] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ +0,000014] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ +0,000051] pci 0000:00:14.0: PME# supported from D3hot D3cold [ +0,000086] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ +0,000015] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit] [ +0,000054] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ +0,000047] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ +0,000012] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ +0,000007] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ +0,000007] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ +0,000048] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ +0,000065] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ +0,000013] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff] [ +0,000072] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ +0,000066] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ +0,000014] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ +0,000061] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ +0,000077] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ +0,000014] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ +0,000071] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ +0,000070] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ +0,000156] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ +0,000011] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ +0,000006] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ +0,000007] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ +0,000007] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ +0,000006] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ +0,000007] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ +0,000029] pci 0000:00:1f.2: PME# supported from D3hot [ +0,000060] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ +0,000014] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ +0,000018] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ +0,000629] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ +0,000040] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ +0,000001] ACPI: PCI: Interrupt link LNKB disabled [ +0,000039] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ +0,000039] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ +0,000040] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ +0,000039] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ +0,000001] ACPI: PCI: Interrupt link LNKF disabled [ +0,000039] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ +0,000031] ACPI: PCI: Interrupt link LNKH configured for IRQ 4 [ +0,000204] iommu: Default domain type: Translated [ +0,000000] iommu: DMA domain TLB invalidation policy: lazy mode [ +0,000000] pps_core: LinuxPPS API ver. 1 registered [ +0,000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ +0,000000] PTP clock support registered [ +0,000000] EDAC MC: Ver: 3.0.0 [ +0,000000] Registered efivars operations [ +0,000000] NetLabel: Initializing [ +0,000000] NetLabel: domain hash size = 128 [ +0,000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ +0,000000] NetLabel: unlabeled traffic allowed by default [ +0,000000] PCI: Using ACPI for IRQ routing [ +0,001658] PCI: pci_cache_line_size set to 64 bytes [ +0,000025] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ +0,000002] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ +0,000001] e820: reserve RAM buffer [mem 0xd04b5000-0xd3ffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xd1c98000-0xd3ffffff] [ +0,000002] e820: reserve RAM buffer [mem 0xd20d1000-0xd3ffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xd7ee8000-0xd7ffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xd8762000-0xdbffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xd8faf000-0xdbffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xda71d000-0xdbffffff] [ +0,000001] e820: reserve RAM buffer [mem 0xdbe11000-0xdbffffff] [ +0,000001] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] [ +0,000014] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ +0,000000] pci 0000:00:02.0: vgaarb: bridge control possible [ +0,000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ +0,000000] vgaarb: loaded [ +0,000240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ +0,000007] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ +0,002040] clocksource: Switched to clocksource tsc-early [ +0,000092] VFS: Disk quotas dquot_6.6.0 [ +0,000000] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ +0,000000] AppArmor: AppArmor Filesystem Enabled [ +0,000000] pnp: PnP ACPI init [ +0,000000] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ +0,000000] system 00:01: [io 0x0680-0x069f] has been reserved [ +0,000000] system 00:01: [io 0xffff] has been reserved [ +0,000000] system 00:01: [io 0xffff] has been reserved [ +0,000000] system 00:01: [io 0xffff] has been reserved [ +0,000000] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ +0,000000] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ +0,000000] system 00:01: [io 0x1e00-0x1efe] has been reserved [ +0,000000] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ +0,000000] system 00:01: [io 0x1800-0x18fe] has been reserved [ +0,000000] system 00:01: [io 0x164e-0x164f] has been reserved [ +0,000000] system 00:03: [io 0x1854-0x1857] has been reserved [ +0,000000] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ +0,000000] system 00:05: [io 0x04d0-0x04d1] has been reserved [ +0,000000] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ +0,000000] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ +0,000000] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ +0,000000] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ +0,000000] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ +0,000000] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ +0,000000] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ +0,000000] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ +0,000000] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ +0,000000] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ +0,000000] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ +0,000000] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved [ +0,000000] pnp: PnP ACPI: found 7 devices [ +0,003678] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ +0,000071] NET: Registered PF_INET protocol family [ +0,000134] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ +0,001412] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ +0,000040] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ +0,000060] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ +0,000278] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ +0,000349] TCP: Hash tables configured (established 65536 bind 65536) [ +0,000068] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ +0,000041] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ +0,000024] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ +0,000041] NET: Registered PF_UNIX/PF_LOCAL protocol family [ +0,000007] NET: Registered PF_XDP protocol family [ +0,000011] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ +0,000003] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ +0,000001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ +0,000001] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window] [ +0,000001] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ +0,027705] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 21734 usecs [ +0,023996] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23417 usecs [ +0,000018] PCI: CLS 64 bytes, default 64 [ +0,000005] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ +0,000000] software IO TLB: mapped [mem 0x00000000cab1d000-0x00000000ceb1d000] (64MB) [ +0,000045] Trying to unpack rootfs image as initramfs... [ +0,000312] Initialise system trusted keyrings [ +0,000010] Key type blacklist registered [ +0,000058] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ +0,001116] zbud: loaded [ +0,000254] integrity: Platform Keyring initialized [ +0,000006] integrity: Machine keyring initialized [ +0,000002] Key type asymmetric registered [ +0,000001] Asymmetric key parser 'x509' registered [ +0,352831] Freeing initrd memory: 61052K [ +0,003939] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ +0,000021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ +0,000026] io scheduler mq-deadline registered [ +0,000662] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ +0,000499] ACPI: \_TZ_.TZ00: Invalid active0 threshold [ +0,000064] thermal LNXTHERM:00: registered as thermal_zone0 [ +0,000002] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ +0,000158] thermal LNXTHERM:01: registered as thermal_zone1 [ +0,000002] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ +0,000105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ +0,000438] Linux agpgart interface v0.103 [ +0,000040] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ +0,000221] i8042: PNP: No PS/2 controller found. [ +0,000055] mousedev: PS/2 mouse device common for all mice [ +0,000013] rtc_cmos 00:02: RTC can wake from S4 [ +0,000208] rtc_cmos 00:02: registered as rtc0 [ +0,000035] rtc_cmos 00:02: setting system clock to 2023-12-28T17:18:59 UTC (1703783939) [ +0,000024] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ +0,000071] intel_pstate: Intel P-state driver initializing [ +0,000213] ledtrig-cpu: registered to indicate activity on CPUs [ +0,000282] efifb: probing for efifb [ +0,000017] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ +0,000002] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ +0,000002] efifb: scrolling: redraw [ +0,000001] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ +0,000090] Console: switching to colour frame buffer device 128x48 [ +0,000572] fb0: EFI VGA frame buffer device [ +0,009425] NET: Registered PF_INET6 protocol family [ +0,004393] Segment Routing with IPv6 [ +0,000010] In-situ OAM (IOAM) with IPv6 [ +0,000020] mip6: Mobile IPv6 [ +0,000003] NET: Registered PF_PACKET protocol family [ +0,000026] mpls_gso: MPLS GSO support [ +0,000204] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ +0,000012] microcode: Microcode Update Driver: v2.2. [ +0,000005] IPI shorthand broadcast: enabled [ +0,000021] sched_clock: Marking stable (588521392, 165349)->(4814560034, -4225873293) [ +0,000159] registered taskstats version 1 [ +0,000007] Loading compiled-in X.509 certificates [ +0,016663] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ +0,000016] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ +0,000256] zswap: loaded using pool lzo/zbud [ +0,000163] Key type .fscrypt registered [ +0,000002] Key type fscrypt-provisioning registered [ +0,003822] Key type encrypted registered [ +0,000005] AppArmor: AppArmor sha1 policy hashing enabled [ +0,000191] integrity: Loading X.509 certificate: UEFI:db [ +0,000027] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ +0,000001] integrity: Loading X.509 certificate: UEFI:db [ +0,000018] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ +0,000733] ima: No TPM chip found, activating TPM-bypass! [ +0,000001] ima: Allocated hash algorithm: sha256 [ +0,000009] ima: No architecture policies found [ +0,000010] evm: Initialising EVM extended attributes: [ +0,000001] evm: security.selinux [ +0,000001] evm: security.SMACK64 (disabled) [ +0,000001] evm: security.SMACK64EXEC (disabled) [ +0,000000] evm: security.SMACK64TRANSMUTE (disabled) [ +0,000001] evm: security.SMACK64MMAP (disabled) [ +0,000000] evm: security.apparmor [ +0,000001] evm: security.ima [ +0,000000] evm: security.capability [ +0,000001] evm: HMAC attrs: 0x1 [ +0,089123] Freeing unused decrypted memory: 2036K [ +0,000364] Freeing unused kernel image (initmem) memory: 2792K [ +0,011914] Write protecting the kernel read-only data: 26624k [ +0,000407] Freeing unused kernel image (text/rodata gap) memory: 2040K [ +0,000153] Freeing unused kernel image (rodata/data gap) memory: 1192K [ +0,042637] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ +0,000002] x86/mm: Checking user space page tables [ +0,040338] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ +0,000005] Run /init as init process [ +0,000001] with arguments: [ +0,000001] /init [ +0,000001] with environment: [ +0,000001] HOME=/ [ +0,000000] TERM=linux [ +0,000001] BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64 [ +0,068687] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ +0,026151] ACPI: button: Power Button [PWRB] [ +0,000081] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ +0,002367] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20220331/utaddress-204) [ +0,000007] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,000009] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ +0,000005] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,000001] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ +0,000005] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ +0,000004] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,000001] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) [ +0,000002] e1000e: Intel(R) PRO/1000 Network Driver [ +0,000001] (20220331/utaddress-204) [ +0,000001] ACPI Warning: [ +0,000001] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ +0,000001] SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ +0,000002] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,000001] lpc_ich: Resource conflict(s) found affecting gpio_ich [ +0,009799] ACPI: bus type USB registered [ +0,000031] usbcore: registered new interface driver usbfs [ +0,000010] usbcore: registered new interface driver hub [ +0,000013] usbcore: registered new device driver usb [ +0,005038] ACPI: button: Power Button [PWRF] [ +0,003718] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ +0,000037] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ +0,002627] i2c i2c-0: 1/2 memory slots populated (from DMI) [ +0,000121] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ +0,012968] ehci-pci 0000:00:1a.0: EHCI Host Controller [ +0,000008] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ +0,000017] ehci-pci 0000:00:1a.0: debug port 2 [ +0,000172] ACPI: bus type drm_connector registered [ +0,011767] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 [ +0,012734] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ +0,000069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ +0,000003] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000002] usb usb1: Product: EHCI Host Controller [ +0,000001] usb usb1: Manufacturer: Linux 6.1.0-16-amd64 ehci_hcd [ +0,000001] usb usb1: SerialNumber: 0000:00:1a.0 [ +0,000122] hub 1-0:1.0: USB hub found [ +0,000010] hub 1-0:1.0: 2 ports detected [ +0,000248] xhci_hcd 0000:00:14.0: xHCI Host Controller [ +0,000007] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ +0,001067] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ +0,000151] ehci-pci 0000:00:1d.0: EHCI Host Controller [ +0,000006] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ +0,000015] ehci-pci 0000:00:1d.0: debug port 2 [ +0,000018] xhci_hcd 0000:00:14.0: xHCI Host Controller [ +0,000003] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ +0,000004] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ +0,000045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ +0,000002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000002] usb usb2: Product: xHCI Host Controller [ +0,000001] usb usb2: Manufacturer: Linux 6.1.0-16-amd64 xhci-hcd [ +0,000002] usb usb2: SerialNumber: 0000:00:14.0 [ +0,000189] hub 2-0:1.0: USB hub found [ +0,000023] hub 2-0:1.0: 15 ports detected [ +0,002337] SCSI subsystem initialized [ +0,001143] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ +0,000005] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000001] usb usb4: Product: xHCI Host Controller [ +0,000002] usb usb4: Manufacturer: Linux 6.1.0-16-amd64 xhci-hcd [ +0,000001] usb usb4: SerialNumber: 0000:00:14.0 [ +0,000108] hub 4-0:1.0: USB hub found [ +0,000016] hub 4-0:1.0: 6 ports detected [ +0,000053] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ +0,014360] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ +0,000040] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ +0,000002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000002] usb usb3: Product: EHCI Host Controller [ +0,000001] usb usb3: Manufacturer: Linux 6.1.0-16-amd64 ehci_hcd [ +0,000001] usb usb3: SerialNumber: 0000:00:1d.0 [ +0,000131] hub 3-0:1.0: USB hub found [ +0,000008] hub 3-0:1.0: 2 ports detected [ +0,009783] libata version 3.00 loaded. [ +0,007285] ahci 0000:00:1f.2: version 3.0 [ +0,000206] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ +0,000004] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ +0,000466] scsi host0: ahci [ +0,000239] scsi host1: ahci [ +0,000160] scsi host2: ahci [ +0,000193] scsi host3: ahci [ +0,000058] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 26 [ +0,000002] ata2: DUMMY [ +0,000001] ata3: DUMMY [ +0,000001] ata4: DUMMY [ +0,021133] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ +0,068543] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 64:00:6a:84:80:20 [ +0,000005] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ +0,000057] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ +0,127655] usb 1-1: new high-speed USB device number 2 using ehci-pci [ +0,004000] usb 2-1: new low-speed USB device number 2 using xhci_hcd [ +0,012043] tsc: Refined TSC clocksource calibration: 3092.835 MHz [ +0,000005] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d742b6f, max_idle_ns: 440795322218 ns [ +0,063270] usb 3-1: new high-speed USB device number 2 using ehci-pci [ +0,000254] clocksource: Switched to clocksource tsc [ +0,012525] Console: switching to colour dummy device 80x25 [ +0,000046] i915 0000:00:02.0: vgaarb: deactivate vga console [ +0,001021] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ +0,001359] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ +0,015293] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ +0,001181] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ +0,000171] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [ +0,057146] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ +0,000006] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ +0,000319] hub 1-1:1.0: USB hub found [ +0,000054] hub 1-1:1.0: 6 ports detected [ +0,000507] usb 2-1: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.02 [ +0,000004] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 2-1: Product: USB Keyboard [ +0,000002] usb 2-1: Manufacturer: Logitech [ +0,012212] hid: raw HID events driver (C) Jiri Kosina [ +0,054899] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ +0,000005] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ +0,000848] hub 3-1:1.0: USB hub found [ +0,000144] hub 3-1:1.0: 8 ports detected [ +0,058725] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ +0,021055] usb 4-2: New USB device found, idVendor=4971, idProduct=8017, bcdDevice=81.05 [ +0,000005] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 4-2: Product: USB to ATA/ATAPI Bridge [ +0,000002] usb 4-2: Manufacturer: JMicron [ +0,000001] usb 4-2: SerialNumber: 111122223333 [ +0,010336] usbcore: registered new interface driver usb-storage [ +0,002671] fbcon: i915drmfb (fb0) is primary device [ +0,040262] Console: switching to colour frame buffer device 240x67 [ +0,021970] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ +0,051715] usb 2-3: new low-speed USB device number 3 using xhci_hcd [ +0,019764] ata1.00: ATA-8: TOSHIBA MQ02ABF050H, HDF01D, max UDMA/100 [ +0,001958] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ +0,000005] ata1.00: Features: NCQ-sndrcv [ +0,003394] ata1.00: configured for UDMA/100 [ +0,000125] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ02ABF0 1D PQ: 0 ANSI: 5 [ +0,008765] scsi host4: uas [ +0,000098] usbcore: registered new interface driver uas [ +0,000542] scsi 4:0:0:0: Direct-Access ST8000VN 004-2M2101 8105 PQ: 0 ANSI: 6 [ +0,003700] usbcore: registered new interface driver usbhid [ +0,000005] usbhid: USB HID core driver [ +0,002053] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C31C.0001/input/input3 [ +0,005808] sd 0:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ +0,000004] sd 0:0:0:0: [sdb] 4096-byte physical blocks [ +0,000011] sd 0:0:0:0: [sdb] Write Protect is off [ +0,000003] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ +0,000015] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000028] sd 0:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ +0,000147] sd 4:0:0:0: [sda] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ +0,000004] sd 4:0:0:0: [sda] 4096-byte physical blocks [ +0,000172] sd 4:0:0:0: [sda] Write Protect is off [ +0,000003] sd 4:0:0:0: [sda] Mode Sense: 53 00 00 08 [ +0,000321] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000003] sd 4:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ +0,000002] sd 4:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ +0,002827] sdb: sdb1 sdb2 sdb3 [ +0,000144] sd 0:0:0:0: [sdb] Attached SCSI disk [ +0,014060] e1000e 0000:00:19.0 eno1: renamed from eth0 [ +0,010144] sda: sda1 sda2 [ +0,000115] sd 4:0:0:0: [sda] Attached SCSI disk [ +0,025858] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0 [ +0,000178] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C31C.0002/input/input4 [ +0,051504] usb 2-3: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40 [ +0,000006] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000003] usb 2-3: Product: Optical USB Mouse [ +0,000002] usb 2-3: Manufacturer: Logitech [ +0,002650] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:046D:C016.0003/input/input6 [ +0,005546] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C31C.0002/input/input5 [ +0,000030] hid-generic 0003:046D:C016.0003: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-3/input0 [ +0,000055] hid-generic 0003:046D:C31C.0002: input,hiddev0,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1 [ +0,030539] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ +0,000038] device-mapper: uevent: version 1.0.3 [ +0,000069] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ +0,085344] usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd [ +0,022812] usb 4-4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.24 [ +0,000005] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 4-4: Product: USB3.0 Hub [ +0,000002] usb 4-4: Manufacturer: VIA Labs, Inc. [ +0,001489] hub 4-4:1.0: USB hub found [ +0,000153] hub 4-4:1.0: 4 ports detected [28déc. 18:19] usb 2-4: new high-speed USB device number 4 using xhci_hcd [ +0,123313] PM: Image not found (code -22) [ +0,026563] usb 2-4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.24 [ +0,000004] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000001] usb 2-4: Product: USB2.0 Hub [ +0,000001] usb 2-4: Manufacturer: VIA Labs, Inc. [ +0,001087] hub 2-4:1.0: USB hub found [ +0,000151] hub 2-4:1.0: 4 ports detected [ +0,125026] usb 4-6: new SuperSpeed USB device number 4 using xhci_hcd [ +0,020836] usb 4-6: New USB device found, idVendor=1e91, idProduct=de2c, bcdDevice= 1.00 [ +0,000004] usb 4-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ +0,000001] usb 4-6: Product: Mercury Pro Optical [ +0,000001] usb 4-6: Manufacturer: Other World Computing [ +0,000001] usb 4-6: SerialNumber: 22082488026D [ +0,001582] usb-storage 4-6:1.0: USB Mass Storage device detected [ +0,000300] scsi host5: usb-storage 4-6:1.0 [ +0,327030] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Quota mode: none. [ +0,055054] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ +0,237202] systemd[1]: Inserted module 'autofs4' [ +0,034070] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ +0,000007] systemd[1]: Detected architecture x86-64. [ +0,003276] systemd[1]: Hostname set to . [ +0,076523] usb 2-9: new full-speed USB device number 5 using xhci_hcd [ +0,142986] systemd[1]: Queued start job for default target graphical.target. [ +0,007179] usb 2-9: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.08 [ +0,000003] usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 2-9: Product: Mini Keyboard [ +0,000001] usb 2-9: Manufacturer: [ +0,003167] input: Mini Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/0003:1997:2433.0004/input/input7 [ +0,007641] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ +0,000301] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ +0,000259] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ +0,000185] systemd[1]: Created slice user.slice - User and Session Slice. [ +0,000069] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ +0,000155] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ +0,000066] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ +0,000052] systemd[1]: Reached target slices.target - Slice Units. [ +0,000027] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ +0,000074] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ +0,000108] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ +0,002886] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. [ +0,000159] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ +0,000070] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ +0,000363] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ +0,000121] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ +0,000122] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ +0,000156] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. [ +0,000352] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ +0,000090] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ +0,000724] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ +0,000743] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ +0,000887] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ +0,001108] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ +0,000161] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ +0,000145] systemd[1]: Finished blk-availability.service - Availability of block devices. [ +0,002089] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ +0,000973] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ +0,001114] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ +0,001247] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ +0,001156] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ +0,001366] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ +0,002153] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ +0,001461] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ +0,002260] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ +0,000301] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ +0,002124] systemd[1]: Starting systemd-journald.service - Journal Service... [ +0,006343] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ +0,000840] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... [ +0,000786] pstore: Using crash dump compression: deflate [ +0,000275] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ +0,001344] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ +0,002237] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ +0,000400] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ +0,000320] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ +0,000304] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ +0,000465] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ +0,000587] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ +0,000211] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ +0,000387] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ +0,000201] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ +0,000401] systemd[1]: modprobe@drm.service: Deactivated successfully. [ +0,000165] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ +0,002731] loop: module loaded [ +0,001938] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ +0,000893] systemd[1]: modprobe@loop.service: Deactivated successfully. [ +0,000344] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ +0,000317] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ +0,001501] pstore: Registered efi as persistent store backend [ +0,000791] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ +0,000209] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ +0,002066] systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line. [ +0,000327] systemd[1]: Reached target network-pre.target - Preparation for Network. [ +0,000969] hid-generic 0003:1997:2433.0004: input,hidraw3: USB HID v1.01 Keyboard [ Mini Keyboard] on usb-0000:00:14.0-9/input0 [ +0,000774] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ +0,001186] input: Mini Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:1997:2433.0005/input/input8 [ +0,000076] input: Mini Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:1997:2433.0005/input/input9 [ +0,001829] fuse: init (API version 7.37) [ +0,000631] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ +0,000126] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ +0,000517] EXT4-fs (dm-5): re-mounted. Quota mode: none. [ +0,000658] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ +0,001656] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ +0,000352] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ +0,001063] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ +0,000854] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ +0,030431] systemd[1]: Started systemd-journald.service - Journal Service. [ +0,004263] lp: driver loaded but no devices found [ +0,007597] ppdev: user-space parallel port driver [ +0,014135] input: Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:1997:2433.0005/input/input10 [ +0,000065] hid-generic 0003:1997:2433.0005: input,hidraw4: USB HID v1.01 Mouse [ Mini Keyboard] on usb-0000:00:14.0-9/input1 [ +0,009597] scsi 5:0:0:0: CD-ROM ASUS BC-12D2HT 3.12 PQ: 0 ANSI: 0 [ +0,090286] usb 4-4.3: new SuperSpeed USB device number 5 using xhci_hcd [ +0,023055] usb 4-4.3: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.24 [ +0,000004] usb 4-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 4-4.3: Product: USB3.0 Hub [ +0,000001] usb 4-4.3: Manufacturer: VIA Labs, Inc. [ +0,060446] hub 4-4.3:1.0: USB hub found [ +0,001118] hub 4-4.3:1.0: 4 ports detected [ +0,017420] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ +0,000093] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ +0,001327] scsi 5:0:0:0: Attached scsi generic sg2 type 5 [ +0,043392] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ +0,000006] cdrom: Uniform CD-ROM driver Revision: 3.20 [ +0,005808] usb 2-4.2: new high-speed USB device number 6 using xhci_hcd [ +0,008177] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ +0,103629] Adding 17575932k swap on /dev/mapper/vg0-swap. Priority:-2 extents:1 across:17575932k FS [ +0,057544] usb 2-4.2: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000008] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000003] usb 2-4.2: Product: RTL2838UHIDIR [ +0,000002] usb 2-4.2: Manufacturer: Realtek [ +0,000002] usb 2-4.2: SerialNumber: 00000001 [ +0,025199] iTCO_vendor_support: vendor-support=0 [ +0,001418] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ +0,034222] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ +0,000210] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ +0,045708] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ +0,000005] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ +0,000001] RAPL PMU: hw unit of domain package 2^-14 Joules [ +0,000001] RAPL PMU: hw unit of domain dram 2^-14 Joules [ +0,000002] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ +0,009087] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ +0,009305] cryptd: max_cpu_qlen set to 1000 [ +0,056869] usb 2-4.3: new high-speed USB device number 7 using xhci_hcd [ +0,044679] AVX2 version of gcm_enc/dec engaged. [ +0,000043] AES CTR mode by8 optimization enabled [ +0,028616] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ +0,000182] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ +0,000212] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ +0,000171] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ +0,076928] usb 2-4.3: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.24 [ +0,000007] usb 2-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 2-4.3: Product: USB2.0 Hub [ +0,000001] usb 2-4.3: Manufacturer: VIA Labs, Inc. [ +0,004204] hub 2-4.3:1.0: USB hub found [ +0,000174] hub 2-4.3:1.0: 4 ports detected [ +0,003096] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ +0,001686] snd_hda_intel 0000:00:03.0: enabling device (0100 -> 0102) [ +0,000164] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ +0,016527] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ +0,040466] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ +0,000084] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ +0,000061] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ +0,134919] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ +0,000005] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ +0,000002] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: inputs: [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ +0,000002] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x1b [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ +0,107468] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Quota mode: none. [ +0,015565] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ +0,000091] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ +0,000081] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ +0,104373] intel_rapl_common: Found RAPL domain package [ +0,000003] intel_rapl_common: Found RAPL domain core [ +0,000001] intel_rapl_common: Found RAPL domain uncore [ +0,000001] intel_rapl_common: Found RAPL domain dram [ +0,000004] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ +0,000005] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ +0,413687] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: none. [ +0,018779] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none. [ +0,003575] usb 2-4.4: new high-speed USB device number 8 using xhci_hcd [ +0,015061] systemd-journald[303]: Received client request to flush runtime journal. [ +0,008136] systemd-journald[303]: File /var/log/journal/376173662f1d43d0807b42a3a9660019/system.journal corrupted or uncleanly shut down, renaming and replacing. [ +0,148530] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000004] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000001] usb 2-4.4: Product: RTL2838UHIDIR [ +0,000002] usb 2-4.4: Manufacturer: Realtek [ +0,000001] usb 2-4.4: SerialNumber: 00000001 [ +0,148054] mc: Linux media interface: v0.10 [ +0,044466] usb 2-4.2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,054872] usb 2-4.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000012] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000004] usb 2-4.2: media controller created [ +0,000207] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,018301] i2c i2c-9: Added multiplexed i2c bus 10 [ +0,000005] rtl2832 9-0010: Realtek RTL2832 successfully attached [ +0,000013] usb 2-4.2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000007] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,012158] r820t 10-001a: creating new instance [ +0,006746] r820t 10-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,023436] usb 2-4.3.1: new high-speed USB device number 9 using xhci_hcd [ +0,024044] videodev: Linux video capture interface: v2.00 [ +0,054950] rtl2832_sdr rtl2832_sdr.2.auto: Registered as swradio0 [ +0,000009] rtl2832_sdr rtl2832_sdr.2.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.2.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,007045] Registered IR keymap rc-empty [ +0,000027] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/rc/rc0 [ +0,000057] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ +0,000038] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/rc/rc0/input18 [ +0,000117] usb 2-4.2: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,007964] usb 2-4.2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,001653] usb 2-4.4: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,055549] usb 2-4.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000006] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.4: media controller created [ +0,000190] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002210] i2c i2c-11: Added multiplexed i2c bus 12 [ +0,000003] rtl2832 11-0010: Realtek RTL2832 successfully attached [ +0,000011] usb 2-4.4: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000006] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000045] r820t 12-001a: creating new instance [ +0,006795] r820t 12-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,002219] rtl2832_sdr rtl2832_sdr.3.auto: Registered as swradio1 [ +0,000003] rtl2832_sdr rtl2832_sdr.3.auto: Realtek RTL2832 SDR attached [ +0,000001] rtl2832_sdr rtl2832_sdr.3.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,000534] usb 2-4.3.1: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000003] usb 2-4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 2-4.3.1: Product: RTL2838UHIDIR [ +0,000001] usb 2-4.3.1: Manufacturer: Realtek [ +0,000001] usb 2-4.3.1: SerialNumber: 00000001 [ +0,006026] Registered IR keymap rc-empty [ +0,000018] rc rc1: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc1 [ +0,000038] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter [ +0,000029] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc1/input19 [ +0,000073] usb 2-4.4: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,001483] usb 2-4.3.1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,000134] usb 2-4.4: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,054610] usb 2-4.3.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000011] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.3.1: media controller created [ +0,000241] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002533] i2c i2c-13: Added multiplexed i2c bus 14 [ +0,000003] rtl2832 13-0010: Realtek RTL2832 successfully attached [ +0,000009] usb 2-4.3.1: DVB: registering adapter 2 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000005] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000056] r820t 14-001a: creating new instance [ +0,006747] r820t 14-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,001966] rtl2832_sdr rtl2832_sdr.4.auto: Registered as swradio2 [ +0,000005] rtl2832_sdr rtl2832_sdr.4.auto: Realtek RTL2832 SDR attached [ +0,000001] rtl2832_sdr rtl2832_sdr.4.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006575] Registered IR keymap rc-empty [ +0,000041] rc rc2: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.1/rc/rc2 [ +0,000063] rc rc2: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 2, raw IR receiver, no transmitter [ +0,000044] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.1/rc/rc2/input20 [ +0,000180] usb 2-4.3.1: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,011836] usb 2-4.3.1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,001837] usbcore: registered new interface driver dvb_usb_rtl28xxu [ +0,011559] EXT4-fs (sdb2): mounting ext2 file system using the ext4 subsystem [ +0,022274] EXT4-fs (sdb2): mounted filesystem without journal. Quota mode: none. [ +0,080313] usb 2-4.4: dvb_usb_v2: rc.query() failed=-71 [ +0,023766] usb 2-4.3.3: new high-speed USB device number 10 using xhci_hcd [ +0,094430] usb 2-4.4: USB disconnect, device number 8 [ +0,034693] r820t 12-001a: destroying instance [ +0,001187] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.4' successfully deinitialized and disconnected [ +0,037285] usb 2-4.3.3: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000005] usb 2-4.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000001] usb 2-4.3.3: Product: RTL2838UHIDIR [ +0,000001] usb 2-4.3.3: Manufacturer: Realtek [ +0,000001] usb 2-4.3.3: SerialNumber: 00000001 [ +0,008249] usb 2-4.3.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,054613] usb 2-4.3.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000010] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000002] usb 2-4.3.3: media controller created [ +0,000198] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002167] i2c i2c-11: Added multiplexed i2c bus 12 [ +0,000003] rtl2832 11-0010: Realtek RTL2832 successfully attached [ +0,000010] usb 2-4.3.3: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000007] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000042] r820t 12-001a: creating new instance [ +0,006717] r820t 12-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,001950] rtl2832_sdr rtl2832_sdr.3.auto: Registered as swradio1 [ +0,000016] rtl2832_sdr rtl2832_sdr.3.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.3.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,010927] Registered IR keymap rc-empty [ +0,000023] rc rc1: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.3/rc/rc1 [ +0,000044] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter [ +0,000039] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.3/rc/rc1/input21 [ +0,000114] usb 2-4.3.3: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,007974] usb 2-4.3.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,139292] usb 2-4.4: new high-speed USB device number 11 using xhci_hcd [ +0,163554] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000004] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 2-4.4: Product: RTL2838UHIDIR [ +0,000001] usb 2-4.4: Manufacturer: Realtek [ +0,000001] usb 2-4.4: SerialNumber: 00000001 [ +0,007776] usb 2-4.4: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,053858] usb 2-4.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000007] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.4: media controller created [ +0,000277] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002199] i2c i2c-15: Added multiplexed i2c bus 16 [ +0,000005] rtl2832 15-0010: Realtek RTL2832 successfully attached [ +0,000015] usb 2-4.4: DVB: registering adapter 3 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000007] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000049] r820t 16-001a: creating new instance [ +0,006736] r820t 16-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,002024] rtl2832_sdr rtl2832_sdr.5.auto: Registered as swradio3 [ +0,000004] rtl2832_sdr rtl2832_sdr.5.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.5.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006625] Registered IR keymap rc-empty [ +0,000021] rc rc3: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc3 [ +0,000029] rc rc3: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 3, raw IR receiver, no transmitter [ +0,000037] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc3/input22 [ +0,000074] usb 2-4.4: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,011935] usb 2-4.4: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,188910] usb 2-4.4: dvb_usb_v2: rc.query() failed=-71 [ +0,134890] usb 2-4.4: USB disconnect, device number 11 [ +0,031040] r820t 16-001a: destroying instance [ +0,002199] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.4' successfully deinitialized and disconnected [ +0,271726] usb 2-4.4: new high-speed USB device number 12 using xhci_hcd [ +0,163594] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000005] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 2-4.4: Product: RTL2838UHIDIR [ +0,000001] usb 2-4.4: Manufacturer: Realtek [ +0,000001] usb 2-4.4: SerialNumber: 00000001 [ +0,008424] usb 2-4.4: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,054915] usb 2-4.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000007] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.4: media controller created [ +0,000179] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002400] i2c i2c-15: Added multiplexed i2c bus 16 [ +0,000004] rtl2832 15-0010: Realtek RTL2832 successfully attached [ +0,000008] usb 2-4.4: DVB: registering adapter 3 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000006] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000044] r820t 16-001a: creating new instance [ +0,006777] r820t 16-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,002274] rtl2832_sdr rtl2832_sdr.5.auto: Registered as swradio3 [ +0,000003] rtl2832_sdr rtl2832_sdr.5.auto: Realtek RTL2832 SDR attached [ +0,000001] rtl2832_sdr rtl2832_sdr.5.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006753] Registered IR keymap rc-empty [ +0,000021] rc rc3: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc3 [ +0,000028] rc rc3: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 3, raw IR receiver, no transmitter [ +0,000025] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc3/input23 [ +0,000058] usb 2-4.4: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,012151] usb 2-4.4: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,008779] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ +0,000044] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ +0,205085] usb 2-4.4: dvb_usb_v2: rc.query() failed=-71 [ +0,111249] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: none. [ +0,054827] audit: type=1400 audit(1703783946.734:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=693 comm="apparmor_parser" [ +0,000605] audit: type=1400 audit(1703783946.734:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=694 comm="apparmor_parser" [ +0,000006] audit: type=1400 audit(1703783946.734:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=694 comm="apparmor_parser" [ +0,009825] audit: type=1400 audit(1703783946.742:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session" pid=692 comm="apparmor_parser" [ +0,000008] audit: type=1400 audit(1703783946.742:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/x86_64-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=692 comm="apparmor_parser" [ +0,000003] audit: type=1400 audit(1703783946.742:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=697 comm="apparmor_parser" [ +0,000003] audit: type=1400 audit(1703783946.742:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=695 comm="apparmor_parser" [ +0,000004] audit: type=1400 audit(1703783946.742:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=695 comm="apparmor_parser" [ +0,000005] audit: type=1400 audit(1703783946.742:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=695 comm="apparmor_parser" [ +0,000003] audit: type=1400 audit(1703783946.742:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=695 comm="apparmor_parser" [ +0,091037] RPC: Registered named UNIX socket transport module. [ +0,000003] RPC: Registered udp transport module. [ +0,000001] RPC: Registered tcp transport module. [ +0,000000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ +0,064702] usb 2-4.4: USB disconnect, device number 12 [ +0,094793] r820t 16-001a: destroying instance [ +0,000883] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.4' successfully deinitialized and disconnected [ +0,280467] usb 2-4.4: new high-speed USB device number 13 using xhci_hcd [ +0,716486] NET: Registered PF_QIPCRTR protocol family [ +0,007511] usb 2-4.4: device descriptor read/64, error -71 [ +0,828027] usb 2-4.4: device descriptor read/64, error -71 [ +0,239984] usb 2-4.4: new high-speed USB device number 14 using xhci_hcd [ +0,732119] usb 2-4.4: device descriptor read/64, error -71 [ +0,811867] usb 2-4.4: device descriptor read/64, error -71 [ +0,112270] usb 2-4-port4: attempt power cycle [ +1,519718] usb 2-4.4: new high-speed USB device number 15 using xhci_hcd [ +0,012733] usb 2-4.4: Device not responding to setup address. [ +0,160161] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ +0,031974] XFS (sda2): Mounting V5 Filesystem [ +0,019205] usb 2-4.4: Device not responding to setup address. [ +0,113617] XFS (sda2): Starting recovery (logdev: internal) [ +0,094326] usb 2-4.4: device not accepting address 15, error -71 [ +0,021484] XFS (sda2): Ending recovery (logdev: internal) [ +0,362503] usb 2-4.4: new high-speed USB device number 16 using xhci_hcd [ +0,023111] usb 2-4.4: Device not responding to setup address. [ +0,204955] usb 2-4.4: Device not responding to setup address. [ +0,207927] usb 2-4.4: device not accepting address 16, error -71 [ +0,000261] usb 2-4-port4: unable to enumerate USB device [ +0,271768] usb 2-4.4: new high-speed USB device number 17 using xhci_hcd [ +0,692123] usb 2-4.4: device descriptor read/64, error -71 [ +0,799996] usb 2-4.4: device descriptor read/64, error -71 [ +0,235966] usb 2-4.4: new high-speed USB device number 18 using xhci_hcd [ +1,076030] usb 2-4.4: device descriptor read/64, error -71 [ +0,744002] usb 2-4.4: device descriptor read/64, error -71 [ +0,108270] usb 2-4-port4: attempt power cycle [ +1,507870] usb 2-4.4: new high-speed USB device number 19 using xhci_hcd [ +0,034182] usb 2-4.4: Device not responding to setup address. [ +0,205738] usb 2-4.4: Device not responding to setup address. [ +0,207903] usb 2-4.4: device not accepting address 19, error -71 [ +0,384004] usb 2-4.4: new high-speed USB device number 20 using xhci_hcd [ +0,040741] usb 2-4.4: Device not responding to setup address. [ +0,207414] usb 2-4.4: Device not responding to setup address. [ +0,207845] usb 2-4.4: device not accepting address 20, error -71 [ +0,000441] usb 2-4-port4: unable to enumerate USB device [ +0,271557] usb 2-4.4: new high-speed USB device number 21 using xhci_hcd [ +0,684031] usb 2-4.4: device descriptor read/64, error -71 [ +1,295996] usb 2-4.4: device descriptor read/64, error -71 [ +0,235984] usb 2-4.4: new high-speed USB device number 22 using xhci_hcd [ +0,700021] usb 2-4.4: device descriptor read/64, error -71 [ +0,796008] usb 2-4.4: device descriptor read/64, error -71 [ +0,108216] usb 2-4-port4: attempt power cycle [ +1,531766] usb 2-4.4: new high-speed USB device number 23 using xhci_hcd [ +0,001740] usb 2-4.4: Device not responding to setup address. [ +0,206376] usb 2-4.4: Device not responding to setup address. [ +0,207871] usb 2-4.4: device not accepting address 23, error -71 [ +0,383998] usb 2-4.4: new high-speed USB device number 24 using xhci_hcd [ +0,015631] usb 2-4.4: Device not responding to setup address. [ +0,204511] usb 2-4.4: Device not responding to setup address. [ +0,207854] usb 2-4.4: device not accepting address 24, error -71 [ +0,000367] usb 2-4-port4: unable to enumerate USB device [ +0,271637] usb 2-4.4: new high-speed USB device number 25 using xhci_hcd [ +0,684023] usb 2-4.4: device descriptor read/64, error -71 [ +0,800019] usb 2-4.4: device descriptor read/64, error -71 [ +0,235958] usb 2-4.4: new high-speed USB device number 26 using xhci_hcd [ +0,684027] usb 2-4.4: device descriptor read/64, error -71 [ +0,787991] usb 2-4.4: device descriptor read/64, error -71 [ +0,108355] usb 2-4-port4: attempt power cycle [ +1,535622] usb 2-4.4: new high-speed USB device number 27 using xhci_hcd [ +0,013776] usb 2-4.4: Device not responding to setup address. [ +0,206367] usb 2-4.4: Device not responding to setup address. [ +0,207853] usb 2-4.4: device not accepting address 27, error -71 [ +1,680006] usb 2-4.4: new high-speed USB device number 28 using xhci_hcd [ +0,008404] usb 2-4.4: Device not responding to setup address. [ +0,207715] usb 2-4.4: Device not responding to setup address. [ +0,207872] usb 2-4.4: device not accepting address 28, error -71 [ +0,000284] usb 2-4-port4: unable to enumerate USB device [ +0,271723] usb 2-4.4: new high-speed USB device number 29 using xhci_hcd [ +1,982819] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,129183] usb 2-4.4: new high-speed USB device number 30 using xhci_hcd [ +1,712042] usb 2-4.4: device descriptor read/64, error -71 [ +0,796018] usb 2-4.4: device descriptor read/64, error -71 [ +0,011687] systemd-journald[303]: Time jumped backwards, rotating. [ +0,096502] usb 2-4-port4: attempt power cycle [ +1,523758] usb 2-4.4: new high-speed USB device number 31 using xhci_hcd [ +0,014429] usb 2-4.4: Device not responding to setup address. [ +0,205710] usb 2-4.4: Device not responding to setup address. [ +0,207845] usb 2-4.4: device not accepting address 31, error -71 [ +0,384007] usb 2-4.4: new high-speed USB device number 32 using xhci_hcd [ +0,009794] usb 2-4.4: Device not responding to setup address. [ +0,206183] usb 2-4.4: Device not responding to setup address. [ +0,208024] usb 2-4.4: device not accepting address 32, error -71 [ +0,000359] usb 2-4-port4: unable to enumerate USB device [ +0,271642] usb 2-4.4: new high-speed USB device number 33 using xhci_hcd [ +1,204025] usb 2-4.4: device descriptor read/64, error -71 [ +0,800032] usb 2-4.4: device descriptor read/64, error -71 [ +0,235941] usb 2-4.4: new high-speed USB device number 34 using xhci_hcd [ +0,684031] usb 2-4.4: device descriptor read/64, error -71 [ +1,187991] usb 2-4.4: device descriptor read/64, error -71 [ +0,108225] usb 2-4-port4: attempt power cycle [ +1,539724] usb 2-4.4: new high-speed USB device number 35 using xhci_hcd [ +0,001594] usb 2-4.4: Device not responding to setup address. [ +0,206583] usb 2-4.4: Device not responding to setup address. [ +0,207809] usb 2-4.4: device not accepting address 35, error -71 [ +0,747981] usb 2-4.4: new high-speed USB device number 36 using xhci_hcd [ +0,002414] usb 2-4.4: Device not responding to setup address. [ +0,205757] usb 2-4.4: Device not responding to setup address. [ +0,207905] usb 2-4.4: device not accepting address 36, error -71 [ +0,000354] usb 2-4-port4: unable to enumerate USB device [ +0,271552] usb 2-4.4: new high-speed USB device number 37 using xhci_hcd [ +0,692128] usb 2-4.4: device descriptor read/64, error -71 [ +1,985053] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +1,845206] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,000335] usb 2-4-port4: attempt power cycle [ +2,986633] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +1,842555] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,000323] usb 2-4-port4: unable to enumerate USB device [ +1,093962] usb 2-4.2: Frontend requested software zigzag, but didn't set the frequency step size [28déc. 18:22] show_signal_msg: 12 callbacks suppressed [ +0,000004] vdr-sxfe[1418]: segfault at 7ff376ddf010 ip 00007ff3e66905c9 sp 00007ff3d37fd748 error 4 in libc.so.6[7ff3e6564000+155000] likely on CPU 3 (core 1, socket 0) [ +0,000009] Code: 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 83 fa 20 72 27 fe 6f 06 48 83 fa 40 0f 87 a9 00 00 00 c5 fe 6f 4c 16 e0 c5 fe [ +14,388314] input: Realtek RTL2832U reference design (lircd bypass) as /devices/virtual/input/input24 [ +0,090297] input: Realtek RTL2832U reference design (lircd bypass) as /devices/virtual/input/input25 [ +0,258113] FS-Cache: Loaded [ +0,102802] Key type dns_resolver registered [ +0,269214] NFS: Registering the id_resolver key type [ +0,000011] Key type id_resolver registered [ +0,000002] Key type id_legacy registered [28déc. 18:54] perf: interrupt took too long (2545 > 2500), lowering kernel.perf_event_max_sample_rate to 78500 [28déc. 19:09] perf: interrupt took too long (3260 > 3181), lowering kernel.perf_event_max_sample_rate to 61250 [28déc. 19:28] perf: interrupt took too long (4154 > 4075), lowering kernel.perf_event_max_sample_rate to 48000 [28déc. 19:51] perf: interrupt took too long (5258 > 5192), lowering kernel.perf_event_max_sample_rate to 38000 [28déc. 20:39] perf: interrupt took too long (6620 > 6572), lowering kernel.perf_event_max_sample_rate to 30000 [28déc. 22:04] perf: interrupt took too long (8277 > 8275), lowering kernel.perf_event_max_sample_rate to 24000 [29déc. 00:00] audit: type=1400 audit(1703804401.405:24): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=3264 comm="cupsd" capability=12 capname="net_admin" [29déc. 02:19] perf: interrupt took too long (10409 > 10346), lowering kernel.perf_event_max_sample_rate to 19000 [29déc. 07:25] usb 4-6: reset SuperSpeed USB device number 4 using xhci_hcd [ +0,020963] sr 5:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK cmd_age=30s [ +0,000005] sr 5:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 02 00 00 00 02 00 [ +0,000001] I/O error, dev sr0, sector 2048 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ +30,707294] usb 4-6: reset SuperSpeed USB device number 4 using xhci_hcd [29déc. 07:26] usb 4-6: reset SuperSpeed USB device number 4 using xhci_hcd [29déc. 07:30] INFO: task scsi_eh_5:245 blocked for more than 120 seconds. [ +0,000006] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000002] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000001] task:scsi_eh_5 state:D stack:0 pid:245 ppid:2 flags:0x00004000 [ +0,000004] Call Trace: [ +0,000001] [ +0,000002] __schedule+0x34d/0x9e0 [ +0,000006] schedule+0x5a/0xd0 [ +0,000002] io_schedule+0x42/0x70 [ +0,000001] blk_mq_get_tag+0x11a/0x2a0 [ +0,000004] ? cpuusage_read+0x10/0x10 [ +0,000005] __blk_mq_alloc_requests+0x191/0x2e0 [ +0,000002] blk_mq_alloc_request+0x1f2/0x220 [ +0,000003] scsi_alloc_request+0xb/0x30 [scsi_mod] [ +0,000017] scsi_error_handler+0x1dc/0x4c0 [scsi_mod] [ +0,000011] ? scsi_eh_get_sense+0x240/0x240 [scsi_mod] [ +0,000010] kthread+0xda/0x100 [ +0,000003] ? kthread_complete_and_exit+0x20/0x20 [ +0,000003] ret_from_fork+0x22/0x30 [ +0,000004] [ +0,000022] INFO: task (udev-worker):4817 blocked for more than 120 seconds. [ +0,000002] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000001] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000001] task:(udev-worker) state:D stack:0 pid:4817 ppid:329 flags:0x00004006 [ +0,000002] Call Trace: [ +0,000001] [ +0,000001] __schedule+0x34d/0x9e0 [ +0,000002] schedule+0x5a/0xd0 [ +0,000001] schedule_preempt_disabled+0x11/0x20 [ +0,000002] __mutex_lock.constprop.0+0x399/0x700 [ +0,000003] blkdev_put+0x3a/0x1c0 [ +0,000003] blkdev_close+0x16/0x20 [ +0,000002] __fput+0x91/0x250 [ +0,000004] task_work_run+0x59/0x90 [ +0,000002] do_exit+0x357/0xaf0 [ +0,000003] do_group_exit+0x2d/0x80 [ +0,000002] get_signal+0x96a/0x970 [ +0,000004] arch_do_signal_or_restart+0x3e/0x830 [ +0,000004] ? vfs_read+0x23c/0x310 [ +0,000003] exit_to_user_mode_prepare+0x195/0x1e0 [ +0,000003] syscall_exit_to_user_mode+0x17/0x40 [ +0,000003] do_syscall_64+0x67/0xc0 [ +0,000004] ? exit_to_user_mode_prepare+0x40/0x1e0 [ +0,000002] entry_SYSCALL_64_after_hwframe+0x64/0xce [ +0,000004] RIP: 0033:0x7fef0546509d [ +0,000002] RSP: 002b:00007fff0a4a9dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ +0,000002] RAX: fffffffffffffffc RBX: 000056341e7e4a80 RCX: 00007fef0546509d [ +0,000001] RDX: 0000000000000200 RSI: 000056341e81a978 RDI: 0000000000000010 [ +0,000001] RBP: 0000000000100000 R08: 00007fef0553fdf0 R09: 00007fef0553fdf0 [ +0,000001] R10: 0000000000000000 R11: 0000000000000246 R12: 000056341e81a950 [ +0,000001] R13: 0000000000000200 R14: 000056341e7e4ad8 R15: 000056341e81a968 [ +0,000002] [29déc. 07:32] INFO: task scsi_eh_5:245 blocked for more than 241 seconds. [ +0,000008] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000003] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000002] task:scsi_eh_5 state:D stack:0 pid:245 ppid:2 flags:0x00004000 [ +0,000004] Call Trace: [ +0,000002] [ +0,000002] __schedule+0x34d/0x9e0 [ +0,000006] schedule+0x5a/0xd0 [ +0,000002] io_schedule+0x42/0x70 [ +0,000001] blk_mq_get_tag+0x11a/0x2a0 [ +0,000004] ? cpuusage_read+0x10/0x10 [ +0,000005] __blk_mq_alloc_requests+0x191/0x2e0 [ +0,000002] blk_mq_alloc_request+0x1f2/0x220 [ +0,000003] scsi_alloc_request+0xb/0x30 [scsi_mod] [ +0,000020] scsi_error_handler+0x1dc/0x4c0 [scsi_mod] [ +0,000012] ? scsi_eh_get_sense+0x240/0x240 [scsi_mod] [ +0,000010] kthread+0xda/0x100 [ +0,000003] ? kthread_complete_and_exit+0x20/0x20 [ +0,000002] ret_from_fork+0x22/0x30 [ +0,000004] [ +0,000022] INFO: task (udev-worker):4817 blocked for more than 241 seconds. [ +0,000002] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000001] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000001] task:(udev-worker) state:D stack:0 pid:4817 ppid:329 flags:0x00004006 [ +0,000002] Call Trace: [ +0,000001] [ +0,000001] __schedule+0x34d/0x9e0 [ +0,000002] schedule+0x5a/0xd0 [ +0,000001] schedule_preempt_disabled+0x11/0x20 [ +0,000002] __mutex_lock.constprop.0+0x399/0x700 [ +0,000002] blkdev_put+0x3a/0x1c0 [ +0,000004] blkdev_close+0x16/0x20 [ +0,000002] __fput+0x91/0x250 [ +0,000004] task_work_run+0x59/0x90 [ +0,000002] do_exit+0x357/0xaf0 [ +0,000003] do_group_exit+0x2d/0x80 [ +0,000002] get_signal+0x96a/0x970 [ +0,000004] arch_do_signal_or_restart+0x3e/0x830 [ +0,000004] ? vfs_read+0x23c/0x310 [ +0,000003] exit_to_user_mode_prepare+0x195/0x1e0 [ +0,000003] syscall_exit_to_user_mode+0x17/0x40 [ +0,000003] do_syscall_64+0x67/0xc0 [ +0,000004] ? exit_to_user_mode_prepare+0x40/0x1e0 [ +0,000002] entry_SYSCALL_64_after_hwframe+0x64/0xce [ +0,000003] RIP: 0033:0x7fef0546509d [ +0,000002] RSP: 002b:00007fff0a4a9dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ +0,000003] RAX: fffffffffffffffc RBX: 000056341e7e4a80 RCX: 00007fef0546509d [ +0,000001] RDX: 0000000000000200 RSI: 000056341e81a978 RDI: 0000000000000010 [ +0,000001] RBP: 0000000000100000 R08: 00007fef0553fdf0 R09: 00007fef0553fdf0 [ +0,000001] R10: 0000000000000000 R11: 0000000000000246 R12: 000056341e81a950 [ +0,000001] R13: 0000000000000200 R14: 000056341e7e4ad8 R15: 000056341e81a968 [ +0,000002] [29déc. 07:34] INFO: task scsi_eh_5:245 blocked for more than 362 seconds. [ +0,000007] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000003] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000001] task:scsi_eh_5 state:D stack:0 pid:245 ppid:2 flags:0x00004000 [ +0,000004] Call Trace: [ +0,000001] [ +0,000002] __schedule+0x34d/0x9e0 [ +0,000005] schedule+0x5a/0xd0 [ +0,000002] io_schedule+0x42/0x70 [ +0,000002] blk_mq_get_tag+0x11a/0x2a0 [ +0,000004] ? cpuusage_read+0x10/0x10 [ +0,000004] __blk_mq_alloc_requests+0x191/0x2e0 [ +0,000002] blk_mq_alloc_request+0x1f2/0x220 [ +0,000004] scsi_alloc_request+0xb/0x30 [scsi_mod] [ +0,000015] scsi_error_handler+0x1dc/0x4c0 [scsi_mod] [ +0,000011] ? scsi_eh_get_sense+0x240/0x240 [scsi_mod] [ +0,000010] kthread+0xda/0x100 [ +0,000003] ? kthread_complete_and_exit+0x20/0x20 [ +0,000003] ret_from_fork+0x22/0x30 [ +0,000004] [ +0,000022] INFO: task (udev-worker):4817 blocked for more than 362 seconds. [ +0,000001] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000001] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000001] task:(udev-worker) state:D stack:0 pid:4817 ppid:329 flags:0x00004006 [ +0,000003] Call Trace: [ +0,000001] [ +0,000001] __schedule+0x34d/0x9e0 [ +0,000002] schedule+0x5a/0xd0 [ +0,000001] schedule_preempt_disabled+0x11/0x20 [ +0,000002] __mutex_lock.constprop.0+0x399/0x700 [ +0,000002] blkdev_put+0x3a/0x1c0 [ +0,000003] blkdev_close+0x16/0x20 [ +0,000003] __fput+0x91/0x250 [ +0,000003] task_work_run+0x59/0x90 [ +0,000002] do_exit+0x357/0xaf0 [ +0,000003] do_group_exit+0x2d/0x80 [ +0,000002] get_signal+0x96a/0x970 [ +0,000004] arch_do_signal_or_restart+0x3e/0x830 [ +0,000004] ? vfs_read+0x23c/0x310 [ +0,000003] exit_to_user_mode_prepare+0x195/0x1e0 [ +0,000004] syscall_exit_to_user_mode+0x17/0x40 [ +0,000003] do_syscall_64+0x67/0xc0 [ +0,000004] ? exit_to_user_mode_prepare+0x40/0x1e0 [ +0,000002] entry_SYSCALL_64_after_hwframe+0x64/0xce [ +0,000003] RIP: 0033:0x7fef0546509d [ +0,000002] RSP: 002b:00007fff0a4a9dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ +0,000002] RAX: fffffffffffffffc RBX: 000056341e7e4a80 RCX: 00007fef0546509d [ +0,000002] RDX: 0000000000000200 RSI: 000056341e81a978 RDI: 0000000000000010 [ +0,000001] RBP: 0000000000100000 R08: 00007fef0553fdf0 R09: 00007fef0553fdf0 [ +0,000001] R10: 0000000000000000 R11: 0000000000000246 R12: 000056341e81a950 [ +0,000001] R13: 0000000000000200 R14: 000056341e7e4ad8 R15: 000056341e81a968 [ +0,000002] [29déc. 07:36] INFO: task scsi_eh_5:245 blocked for more than 483 seconds. [ +0,000021] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000003] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000003] task:scsi_eh_5 state:D stack:0 pid:245 ppid:2 flags:0x00004000 [ +0,000009] Call Trace: [ +0,000002] [ +0,000010] __schedule+0x34d/0x9e0 [ +0,000019] schedule+0x5a/0xd0 [ +0,000002] io_schedule+0x42/0x70 [ +0,000003] blk_mq_get_tag+0x11a/0x2a0 [ +0,000014] ? cpuusage_read+0x10/0x10 [ +0,000014] __blk_mq_alloc_requests+0x191/0x2e0 [ +0,000007] blk_mq_alloc_request+0x1f2/0x220 [ +0,000008] scsi_alloc_request+0xb/0x30 [scsi_mod] [ +0,000058] scsi_error_handler+0x1dc/0x4c0 [scsi_mod] [ +0,000014] ? scsi_eh_get_sense+0x240/0x240 [scsi_mod] [ +0,000011] kthread+0xda/0x100 [ +0,000006] ? kthread_complete_and_exit+0x20/0x20 [ +0,000003] ret_from_fork+0x22/0x30 [ +0,000014] [ +0,000080] INFO: task (udev-worker):4817 blocked for more than 483 seconds. [ +0,000002] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000001] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000001] task:(udev-worker) state:D stack:0 pid:4817 ppid:329 flags:0x00004006 [ +0,000004] Call Trace: [ +0,000002] [ +0,000001] __schedule+0x34d/0x9e0 [ +0,000002] schedule+0x5a/0xd0 [ +0,000002] schedule_preempt_disabled+0x11/0x20 [ +0,000003] __mutex_lock.constprop.0+0x399/0x700 [ +0,000005] blkdev_put+0x3a/0x1c0 [ +0,000011] blkdev_close+0x16/0x20 [ +0,000003] __fput+0x91/0x250 [ +0,000011] task_work_run+0x59/0x90 [ +0,000003] do_exit+0x357/0xaf0 [ +0,000009] do_group_exit+0x2d/0x80 [ +0,000002] get_signal+0x96a/0x970 [ +0,000008] arch_do_signal_or_restart+0x3e/0x830 [ +0,000011] ? vfs_read+0x23c/0x310 [ +0,000004] exit_to_user_mode_prepare+0x195/0x1e0 [ +0,000014] syscall_exit_to_user_mode+0x17/0x40 [ +0,000014] do_syscall_64+0x67/0xc0 [ +0,000012] ? exit_to_user_mode_prepare+0x40/0x1e0 [ +0,000004] entry_SYSCALL_64_after_hwframe+0x64/0xce [ +0,000009] RIP: 0033:0x7fef0546509d [ +0,000004] RSP: 002b:00007fff0a4a9dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ +0,000003] RAX: fffffffffffffffc RBX: 000056341e7e4a80 RCX: 00007fef0546509d [ +0,000001] RDX: 0000000000000200 RSI: 000056341e81a978 RDI: 0000000000000010 [ +0,000002] RBP: 0000000000100000 R08: 00007fef0553fdf0 R09: 00007fef0553fdf0 [ +0,000000] R10: 0000000000000000 R11: 0000000000000246 R12: 000056341e81a950 [ +0,000002] R13: 0000000000000200 R14: 000056341e7e4ad8 R15: 000056341e81a968 [ +0,000002] [29déc. 07:38] INFO: task scsi_eh_5:245 blocked for more than 604 seconds. [ +0,000012] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000003] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000003] task:scsi_eh_5 state:D stack:0 pid:245 ppid:2 flags:0x00004000 [ +0,000004] Call Trace: [ +0,000002] [ +0,000002] __schedule+0x34d/0x9e0 [ +0,000007] schedule+0x5a/0xd0 [ +0,000002] io_schedule+0x42/0x70 [ +0,000002] blk_mq_get_tag+0x11a/0x2a0 [ +0,000004] ? cpuusage_read+0x10/0x10 [ +0,000004] __blk_mq_alloc_requests+0x191/0x2e0 [ +0,000003] blk_mq_alloc_request+0x1f2/0x220 [ +0,000003] scsi_alloc_request+0xb/0x30 [scsi_mod] [ +0,000018] scsi_error_handler+0x1dc/0x4c0 [scsi_mod] [ +0,000011] ? scsi_eh_get_sense+0x240/0x240 [scsi_mod] [ +0,000010] kthread+0xda/0x100 [ +0,000003] ? kthread_complete_and_exit+0x20/0x20 [ +0,000002] ret_from_fork+0x22/0x30 [ +0,000004] [ +0,000023] INFO: task (udev-worker):4817 blocked for more than 604 seconds. [ +0,000003] Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000001] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ +0,000002] task:(udev-worker) state:D stack:0 pid:4817 ppid:329 flags:0x00004006 [ +0,000003] Call Trace: [ +0,000000] [ +0,000001] __schedule+0x34d/0x9e0 [ +0,000002] schedule+0x5a/0xd0 [ +0,000002] schedule_preempt_disabled+0x11/0x20 [ +0,000001] __mutex_lock.constprop.0+0x399/0x700 [ +0,000003] blkdev_put+0x3a/0x1c0 [ +0,000004] blkdev_close+0x16/0x20 [ +0,000003] __fput+0x91/0x250 [ +0,000003] task_work_run+0x59/0x90 [ +0,000002] do_exit+0x357/0xaf0 [ +0,000003] do_group_exit+0x2d/0x80 [ +0,000003] get_signal+0x96a/0x970 [ +0,000003] arch_do_signal_or_restart+0x3e/0x830 [ +0,000005] ? vfs_read+0x23c/0x310 [ +0,000002] exit_to_user_mode_prepare+0x195/0x1e0 [ +0,000004] syscall_exit_to_user_mode+0x17/0x40 [ +0,000003] do_syscall_64+0x67/0xc0 [ +0,000003] ? exit_to_user_mode_prepare+0x40/0x1e0 [ +0,000002] entry_SYSCALL_64_after_hwframe+0x64/0xce [ +0,000004] RIP: 0033:0x7fef0546509d [ +0,000002] RSP: 002b:00007fff0a4a9dd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ +0,000002] RAX: fffffffffffffffc RBX: 000056341e7e4a80 RCX: 00007fef0546509d [ +0,000001] RDX: 0000000000000200 RSI: 000056341e81a978 RDI: 0000000000000010 [ +0,000001] RBP: 0000000000100000 R08: 00007fef0553fdf0 R09: 00007fef0553fdf0 [ +0,000001] R10: 0000000000000000 R11: 0000000000000246 R12: 000056341e81a950 [ +0,000001] R13: 0000000000000200 R14: 000056341e7e4ad8 R15: 000056341e81a968 [ +0,000002]