[ 2janv. 13:39] microcode: microcode updated early to revision 0x28, date = 2019-11-12 [ +0,000000] Linux version 6.1.0-16-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.67-1 (2023-12-12) [ +0,000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64 root=/dev/mapper/vg0-system ro quiet [ +0,000000] BIOS-provided physical RAM map: [ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ +0,000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable [ +0,000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d1c97fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d1c98000-0x00000000d1c9efff] ACPI NVS [ +0,000000] BIOS-e820: [mem 0x00000000d1c9f000-0x00000000d20d0fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d20d1000-0x00000000d2568fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000d2569000-0x00000000d7ee7fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d7ee8000-0x00000000d7ffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d8761fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d8762000-0x00000000d87fffff] type 20 [ +0,000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8faefff] usable [ +0,000000] BIOS-e820: [mem 0x00000000d8faf000-0x00000000d8ffffff] ACPI data [ +0,000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71cfff] usable [ +0,000000] BIOS-e820: [mem 0x00000000da71d000-0x00000000da7fffff] ACPI NVS [ +0,000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbe10fff] usable [ +0,000000] BIOS-e820: [mem 0x00000000dbe11000-0x00000000dbffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable [ +0,000000] NX (Execute Disable) protection: active [ +0,000000] efi: EFI v2.31 by American Megatrends [ +0,000000] efi: ACPI=0xd8fef000 ACPI 2.0=0xd8fef000 SMBIOS=0xf04c0 MOKvar=0xd7f23000 [ +0,000000] secureboot: Secure boot disabled [ +0,000000] SMBIOS 2.7 present. [ +0,000000] DMI: Dell Inc. OptiPlex 9020M/0Y5DDC, BIOS A05 03/22/2015 [ +0,000000] tsc: Fast TSC calibration using PIT [ +0,000000] tsc: Detected 3092.982 MHz processor [ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ +0,000002] e820: remove [mem 0x000a0000-0x000fffff] usable [ +0,000010] last_pfn = 0x21ee00 max_arch_pfn = 0x400000000 [ +0,000094] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ +0,000444] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved [ +0,000005] last_pfn = 0xdbe11 max_arch_pfn = 0x400000000 [ +0,007214] found SMP MP-table at [mem 0x000fd890-0x000fd89f] [ +0,000027] Using GB pages for direct mapping [ +0,001429] RAMDISK: [mem 0x308b1000-0x3444ffff] [ +0,000004] ACPI: Early table checksum verification disabled [ +0,000002] ACPI: RSDP 0x00000000D8FEF000 000024 (v02 DELL ) [ +0,000004] ACPI: XSDT 0x00000000D8FEF088 000094 (v01 DELL CBX3 01072009 AMI 00010013) [ +0,000004] ACPI: FACP 0x00000000D8FF9168 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ +0,000005] ACPI: DSDT 0x00000000D8FEF1B0 009FB1 (v02 DELL CBX3 00000014 INTL 20091112) [ +0,000002] ACPI: FACS 0x00000000DA7FE080 000040 [ +0,000003] ACPI: APIC 0x00000000D8FF9278 000072 (v03 DELL CBX3 01072009 AMI 00010013) [ +0,000002] ACPI: FPDT 0x00000000D8FF92F0 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ +0,000002] ACPI: SLIC 0x00000000D8FF9338 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ +0,000003] ACPI: SSDT 0x00000000D8FF94B0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711) [ +0,000002] ACPI: SSDT 0x00000000D8FF99F0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711) [ +0,000003] ACPI: SSDT 0x00000000D8FFA4C8 0001C7 (v01 PmRef LakeTiny 00003000 INTL 20120711) [ +0,000003] ACPI: HPET 0x00000000D8FFA690 000038 (v01 DELL CBX3 01072009 AMI. 00000005) [ +0,000002] ACPI: SSDT 0x00000000D8FFA6C8 00036D (v01 SataRe SataTabl 00001000 INTL 20120711) [ +0,000003] ACPI: MCFG 0x00000000D8FFAA38 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ +0,000002] ACPI: SSDT 0x00000000D8FFAA78 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112) [ +0,000002] ACPI: ASF! 0x00000000D8FFDFA0 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240) [ +0,000003] ACPI: MSDM 0x00000000D8FFE048 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ +0,000002] ACPI: BGRT 0x00000000D8FFE0A0 000038 (v00 \xf3\xee 01072009 AMI 00010013) [ +0,000003] ACPI: Reserving FACP table memory at [mem 0xd8ff9168-0xd8ff9273] [ +0,000001] ACPI: Reserving DSDT table memory at [mem 0xd8fef1b0-0xd8ff9160] [ +0,000001] ACPI: Reserving FACS table memory at [mem 0xda7fe080-0xda7fe0bf] [ +0,000001] ACPI: Reserving APIC table memory at [mem 0xd8ff9278-0xd8ff92e9] [ +0,000000] ACPI: Reserving FPDT table memory at [mem 0xd8ff92f0-0xd8ff9333] [ +0,000001] ACPI: Reserving SLIC table memory at [mem 0xd8ff9338-0xd8ff94ad] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ff94b0-0xd8ff99e8] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ff99f0-0xd8ffa4c7] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ffa4c8-0xd8ffa68e] [ +0,000001] ACPI: Reserving HPET table memory at [mem 0xd8ffa690-0xd8ffa6c7] [ +0,000000] ACPI: Reserving SSDT table memory at [mem 0xd8ffa6c8-0xd8ffaa34] [ +0,000001] ACPI: Reserving MCFG table memory at [mem 0xd8ffaa38-0xd8ffaa73] [ +0,000001] ACPI: Reserving SSDT table memory at [mem 0xd8ffaa78-0xd8ffdf9f] [ +0,000001] ACPI: Reserving ASF! table memory at [mem 0xd8ffdfa0-0xd8ffe044] [ +0,000001] ACPI: Reserving MSDM table memory at [mem 0xd8ffe048-0xd8ffe09c] [ +0,000000] ACPI: Reserving BGRT table memory at [mem 0xd8ffe0a0-0xd8ffe0d7] [ +0,000057] No NUMA configuration found [ +0,000001] Faking a node at [mem 0x0000000000000000-0x000000021edfffff] [ +0,000010] NODE_DATA(0) allocated [mem 0x21edd5000-0x21edfffff] [ +0,000230] Zone ranges: [ +0,000001] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ +0,000001] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ +0,000002] Normal [mem 0x0000000100000000-0x000000021edfffff] [ +0,000001] Device empty [ +0,000001] Movable zone start for each node [ +0,000002] Early memory node ranges [ +0,000001] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ +0,000001] node 0: [mem 0x0000000000059000-0x000000000009efff] [ +0,000001] node 0: [mem 0x0000000000100000-0x00000000d1c97fff] [ +0,000001] node 0: [mem 0x00000000d1c9f000-0x00000000d20d0fff] [ +0,000000] node 0: [mem 0x00000000d2569000-0x00000000d7ee7fff] [ +0,000001] node 0: [mem 0x00000000d8000000-0x00000000d8761fff] [ +0,000001] node 0: [mem 0x00000000d8800000-0x00000000d8faefff] [ +0,000000] node 0: [mem 0x00000000d9000000-0x00000000da71cfff] [ +0,000001] node 0: [mem 0x00000000da800000-0x00000000dbe10fff] [ +0,000001] node 0: [mem 0x0000000100000000-0x000000021edfffff] [ +0,000001] Initmem setup node 0 [mem 0x0000000000001000-0x000000021edfffff] [ +0,000004] On node 0, zone DMA: 1 pages in unavailable ranges [ +0,000002] On node 0, zone DMA: 1 pages in unavailable ranges [ +0,000033] On node 0, zone DMA: 97 pages in unavailable ranges [ +0,009693] On node 0, zone DMA32: 7 pages in unavailable ranges [ +0,000281] On node 0, zone DMA32: 1176 pages in unavailable ranges [ +0,000027] On node 0, zone DMA32: 280 pages in unavailable ranges [ +0,000026] On node 0, zone DMA32: 158 pages in unavailable ranges [ +0,000070] On node 0, zone DMA32: 81 pages in unavailable ranges [ +0,000069] On node 0, zone DMA32: 227 pages in unavailable ranges [ +0,000567] On node 0, zone Normal: 16879 pages in unavailable ranges [ +0,000054] On node 0, zone Normal: 4608 pages in unavailable ranges [ +0,000012] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ +0,000057] ACPI: PM-Timer IO Port: 0x1808 [ +0,000006] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ +0,000015] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ +0,000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ +0,000002] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ +0,000004] ACPI: Using ACPI (MADT) for SMP configuration information [ +0,000001] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ +0,000009] e820: update [mem 0xd04b5000-0xd04e9fff] usable ==> reserved [ +0,000013] TSC deadline timer available [ +0,000001] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ +0,000029] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd04b5000-0xd04e9fff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd1c98000-0xd1c9efff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xd20d1000-0xd2568fff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd7ee8000-0xd7ffffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd8762000-0xd87fffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xd8faf000-0xd8ffffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xda71d000-0xda7fffff] [ +0,000002] PM: hibernation: Registered nosave memory: [mem 0xdbe11000-0xdbffffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xdc000000-0xdcffffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xdd000000-0xdf1fffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xdf200000-0xf7ffffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ +0,000001] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ +0,000000] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ +0,000002] [mem 0xdf200000-0xf7ffffff] available for PCI devices [ +0,000001] Booting paravirtualized kernel on bare hardware [ +0,000002] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ +0,004005] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ +0,000312] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ +0,000008] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ +0,000002] pcpu-alloc: [0] 0 1 2 3 [ +0,000031] Fallback order for Node 0: 0 [ +0,000003] Built 1 zonelists, mobility grouping on. Total pages: 2041077 [ +0,000001] Policy zone: Normal [ +0,000001] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64 root=/dev/mapper/vg0-system ro quiet [ +0,000040] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64", will be passed to user space. [ +0,000025] random: crng init done [ +0,000693] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ +0,000348] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ +0,000042] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ +0,000004] software IO TLB: area num 4. [ +0,033426] Memory: 3501664K/8294548K available (14342K kernel code, 2331K rwdata, 9048K rodata, 2792K init, 17416K bss, 422208K reserved, 0K cma-reserved) [ +0,000126] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ +0,000013] Kernel/User page tables isolation: enabled [ +0,000032] ftrace: allocating 40157 entries in 157 pages [ +0,006102] ftrace: allocated 157 pages with 5 groups [ +0,000604] Dynamic Preempt: voluntary [ +0,000026] rcu: Preemptible hierarchical RCU implementation. [ +0,000001] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ +0,000002] Trampoline variant of Tasks RCU enabled. [ +0,000000] Rude variant of Tasks RCU enabled. [ +0,000000] Tracing variant of Tasks RCU enabled. [ +0,000001] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ +0,000001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ +0,003820] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16 [ +0,000183] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ +0,000059] Console: colour dummy device 80x25 [ +0,000019] printk: console [tty0] enabled [ +0,000013] ACPI: Core revision 20220331 [ +0,000088] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ +0,000015] APIC: Switch to symmetric I/O mode setup [ +0,000349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ +0,019655] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c95620b008, max_idle_ns: 440795259707 ns [ +0,000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.96 BogoMIPS (lpj=12371928) [ +0,000022] CPU0: Thermal monitoring enabled (TM1) [ +0,000024] process: using mwait in idle threads [ +0,000001] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ +0,000002] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ +0,000002] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ +0,000002] Spectre V2 : Mitigation: Retpolines [ +0,000000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ +0,000001] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ +0,000001] Spectre V2 : Enabling Restricted Speculation for firmware calls [ +0,000001] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ +0,000001] Spectre V2 : User space: Mitigation: STIBP via prctl [ +0,000001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ +0,000002] MDS: Mitigation: Clear CPU buffers [ +0,000001] MMIO Stale Data: Unknown: No mitigations [ +0,000001] SRBDS: Mitigation: Microcode [ +0,000005] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ +0,000001] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ +0,000001] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ +0,000001] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ +0,000001] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ +0,011474] Freeing SMP alternatives memory: 36K [ +0,000003] pid_max: default: 32768 minimum: 301 [ +0,002957] LSM: Security Framework initializing [ +0,000013] landlock: Up and running. [ +0,000000] Yama: disabled by default; enable with sysctl kernel.yama.* [ +0,000021] AppArmor: AppArmor initialized [ +0,000001] TOMOYO Linux initialized [ +0,000005] LSM support for eBPF active [ +0,000026] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ +0,000013] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ +0,000344] smpboot: CPU0: Intel(R) Core(TM) i3-4160T CPU @ 3.10GHz (family: 0x6, model: 0x3c, stepping: 0x3) [ +0,000096] cblist_init_generic: Setting adjustable number of callback queues. [ +0,000001] cblist_init_generic: Setting shift to 2 and lim to 1. [ +0,000013] cblist_init_generic: Setting adjustable number of callback queues. [ +0,000001] cblist_init_generic: Setting shift to 2 and lim to 1. [ +0,000010] cblist_init_generic: Setting adjustable number of callback queues. [ +0,000001] cblist_init_generic: Setting shift to 2 and lim to 1. [ +0,000009] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ +0,000035] ... version: 3 [ +0,000001] ... bit width: 48 [ +0,000000] ... generic registers: 4 [ +0,000001] ... value mask: 0000ffffffffffff [ +0,000001] ... max period: 00007fffffffffff [ +0,000000] ... fixed-purpose events: 3 [ +0,000001] ... event mask: 000000070000000f [ +0,000114] signal: max sigframe size: 1776 [ +0,000013] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ +0,000016] rcu: Hierarchical SRCU implementation. [ +0,000001] rcu: Max phase no-delay instances is 1000. [ +0,000456] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ +0,000048] smp: Bringing up secondary CPUs ... [ +0,000069] x86: Booting SMP configuration: [ +0,000001] .... node #0, CPUs: #1 #2 [ +0,000181] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ +0,000000] #3 [ +0,000211] smp: Brought up 1 node, 4 CPUs [ +0,000000] smpboot: Max logical packages: 1 [ +0,000000] smpboot: Total of 4 processors activated (24743.85 BogoMIPS) [ +0,015584] node 0 deferred pages initialised in 12ms [ +0,000285] devtmpfs: initialized [ +0,000000] x86/mm: Memory block size: 128MB [ +0,000507] ACPI: PM: Registering ACPI NVS region [mem 0xd1c98000-0xd1c9efff] (28672 bytes) [ +0,000000] ACPI: PM: Registering ACPI NVS region [mem 0xda71d000-0xda7fffff] (929792 bytes) [ +0,000000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ +0,000000] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ +0,000000] pinctrl core: initialized pinctrl subsystem [ +0,000009] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ +0,000141] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ +0,000097] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ +0,000096] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ +0,000014] audit: initializing netlink subsys (disabled) [ +0,000015] audit: type=2000 audit(1704199177.052:1): state=initialized audit_enabled=0 res=1 [ +0,000000] thermal_sys: Registered thermal governor 'fair_share' [ +0,000000] thermal_sys: Registered thermal governor 'bang_bang' [ +0,000000] thermal_sys: Registered thermal governor 'step_wise' [ +0,000000] thermal_sys: Registered thermal governor 'user_space' [ +0,000000] thermal_sys: Registered thermal governor 'power_allocator' [ +0,000000] cpuidle: using governor ladder [ +0,000000] cpuidle: using governor menu [ +0,000000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ +0,000000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ +0,000000] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ +0,000000] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override. [ +0,000000] PCI: Using configuration type 1 for base access [ +0,000000] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ +0,000000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ +0,000000] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ +0,000000] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ +0,000000] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ +0,000000] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ +0,000000] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ +0,000000] ACPI: Added _OSI(Module Device) [ +0,000000] ACPI: Added _OSI(Processor Device) [ +0,000000] ACPI: Added _OSI(3.0 _SCP Extensions) [ +0,000000] ACPI: Added _OSI(Processor Aggregator Device) [ +0,010366] ACPI: 6 ACPI AML tables successfully acquired and loaded [ +0,000620] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ +0,001522] ACPI: Dynamic OEM Table Load: [ +0,000005] ACPI: SSDT 0xFFFF8E0CC099B800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ +0,000464] ACPI: Dynamic OEM Table Load: [ +0,000004] ACPI: SSDT 0xFFFF8E0CC088D800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ +0,000487] ACPI: Dynamic OEM Table Load: [ +0,000003] ACPI: SSDT 0xFFFF8E0CC0A26800 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ +0,000754] ACPI: Interpreter enabled [ +0,000022] ACPI: PM: (supports S0 S3 S4 S5) [ +0,000001] ACPI: Using IOAPIC for interrupt routing [ +0,000021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ +0,000001] PCI: Using E820 reservations for host bridge windows [ +0,000132] ACPI: Enabled 7 GPEs in block 00 to 3F [ +0,011373] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ +0,000006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ +0,001406] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ +0,000387] PCI host bridge to bus 0000:00 [ +0,000002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ +0,000002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ +0,000001] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ +0,000001] pci_bus 0000:00: root bus resource [bus 00-3e] [ +0,000017] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000 [ +0,000061] pci 0000:00:02.0: [8086:041e] type 00 class 0x030000 [ +0,000007] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ +0,000005] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ +0,000004] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ +0,000009] pci 0000:00:02.0: BAR 2: assigned to efifb [ +0,000003] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ +0,000069] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 [ +0,000006] pci 0000:00:03.0: reg 0x10: [mem 0xf7c34000-0xf7c37fff 64bit] [ +0,000081] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ +0,000015] pci 0000:00:14.0: reg 0x10: [mem 0xf7c20000-0xf7c2ffff 64bit] [ +0,000050] pci 0000:00:14.0: PME# supported from D3hot D3cold [ +0,000087] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ +0,000015] pci 0000:00:16.0: reg 0x10: [mem 0xf7c40000-0xf7c4000f 64bit] [ +0,000054] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ +0,000052] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 [ +0,000012] pci 0000:00:19.0: reg 0x10: [mem 0xf7c00000-0xf7c1ffff] [ +0,000007] pci 0000:00:19.0: reg 0x14: [mem 0xf7c3d000-0xf7c3dfff] [ +0,000008] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ +0,000048] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ +0,000066] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ +0,000014] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c3c000-0xf7c3c3ff] [ +0,000072] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ +0,000066] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300 [ +0,000014] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c30000-0xf7c33fff 64bit] [ +0,000062] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ +0,000076] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ +0,000014] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c3b000-0xf7c3b3ff] [ +0,000072] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ +0,000064] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100 [ +0,000156] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ +0,000011] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ +0,000007] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ +0,000006] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ +0,000007] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ +0,000006] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ +0,000007] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c3a000-0xf7c3a7ff] [ +0,000029] pci 0000:00:1f.2: PME# supported from D3hot [ +0,000060] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ +0,000014] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c39000-0xf7c390ff 64bit] [ +0,000018] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ +0,000629] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ +0,000040] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ +0,000000] ACPI: PCI: Interrupt link LNKB disabled [ +0,000041] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ +0,000038] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ +0,000038] ACPI: PCI: Interrupt link LNKE configured for IRQ 5 [ +0,000035] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ +0,000000] ACPI: PCI: Interrupt link LNKF disabled [ +0,000040] ACPI: PCI: Interrupt link LNKG configured for IRQ 3 [ +0,000039] ACPI: PCI: Interrupt link LNKH configured for IRQ 4 [ +0,000200] iommu: Default domain type: Translated [ +0,000000] iommu: DMA domain TLB invalidation policy: lazy mode [ +0,000000] pps_core: LinuxPPS API ver. 1 registered [ +0,000000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ +0,000000] PTP clock support registered [ +0,000000] EDAC MC: Ver: 3.0.0 [ +0,000000] Registered efivars operations [ +0,000000] NetLabel: Initializing [ +0,000000] NetLabel: domain hash size = 128 [ +0,000000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ +0,000000] NetLabel: unlabeled traffic allowed by default [ +0,000000] PCI: Using ACPI for IRQ routing [ +0,000000] PCI: pci_cache_line_size set to 64 bytes [ +0,000000] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ +0,000000] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ +0,000000] e820: reserve RAM buffer [mem 0xd04b5000-0xd3ffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xd1c98000-0xd3ffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xd20d1000-0xd3ffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xd7ee8000-0xd7ffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xd8762000-0xdbffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xd8faf000-0xdbffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xda71d000-0xdbffffff] [ +0,000000] e820: reserve RAM buffer [mem 0xdbe11000-0xdbffffff] [ +0,000000] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff] [ +0,000931] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ +0,000000] pci 0000:00:02.0: vgaarb: bridge control possible [ +0,000000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ +0,000000] vgaarb: loaded [ +0,001046] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ +0,000008] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ +0,002047] clocksource: Switched to clocksource tsc-early [ +0,000006] VFS: Disk quotas dquot_6.6.0 [ +0,000000] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ +0,000000] AppArmor: AppArmor Filesystem Enabled [ +0,000000] pnp: PnP ACPI init [ +0,000000] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ +0,000000] system 00:01: [io 0x0680-0x069f] has been reserved [ +0,000000] system 00:01: [io 0xffff] has been reserved [ +0,000000] system 00:01: [io 0xffff] has been reserved [ +0,000000] system 00:01: [io 0xffff] has been reserved [ +0,000000] system 00:01: [io 0x1c00-0x1cfe] has been reserved [ +0,000000] system 00:01: [io 0x1d00-0x1dfe] has been reserved [ +0,000000] system 00:01: [io 0x1e00-0x1efe] has been reserved [ +0,000000] system 00:01: [io 0x1f00-0x1ffe] has been reserved [ +0,000000] system 00:01: [io 0x1800-0x18fe] has been reserved [ +0,000000] system 00:01: [io 0x164e-0x164f] has been reserved [ +0,000000] system 00:03: [io 0x1854-0x1857] has been reserved [ +0,000000] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ +0,000000] system 00:05: [io 0x04d0-0x04d1] has been reserved [ +0,000000] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ +0,000000] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ +0,000000] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ +0,000000] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ +0,000000] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved [ +0,000000] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ +0,000000] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved [ +0,000000] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved [ +0,000000] system 00:06: [mem 0xff000000-0xffffffff] has been reserved [ +0,000000] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved [ +0,000000] system 00:06: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ +0,000000] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved [ +0,000000] pnp: PnP ACPI: found 7 devices [ +0,003587] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ +0,000069] NET: Registered PF_INET protocol family [ +0,000169] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ +0,001530] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ +0,000028] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ +0,000051] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ +0,000288] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ +0,000341] TCP: Hash tables configured (established 65536 bind 65536) [ +0,000074] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ +0,000046] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ +0,000023] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ +0,000044] NET: Registered PF_UNIX/PF_LOCAL protocol family [ +0,000011] NET: Registered PF_XDP protocol family [ +0,000011] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ +0,000003] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ +0,000001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ +0,000001] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff window] [ +0,000001] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ +0,027378] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 22626 usecs [ +0,023996] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23417 usecs [ +0,000017] PCI: CLS 64 bytes, default 64 [ +0,000006] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ +0,000000] software IO TLB: mapped [mem 0x00000000cb19d000-0x00000000cf19d000] (64MB) [ +0,000044] Trying to unpack rootfs image as initramfs... [ +0,000396] Initialise system trusted keyrings [ +0,000012] Key type blacklist registered [ +0,000051] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ +0,001938] zbud: loaded [ +0,000333] integrity: Platform Keyring initialized [ +0,000008] integrity: Machine keyring initialized [ +0,000003] Key type asymmetric registered [ +0,000002] Asymmetric key parser 'x509' registered [ +0,352223] Freeing initrd memory: 61052K [ +0,004030] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ +0,000026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ +0,000026] io scheduler mq-deadline registered [ +0,000665] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ +0,000455] ACPI: \_TZ_.TZ00: Invalid active0 threshold [ +0,000069] thermal LNXTHERM:00: registered as thermal_zone0 [ +0,000001] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ +0,000139] thermal LNXTHERM:01: registered as thermal_zone1 [ +0,000002] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ +0,000112] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ +0,000398] Linux agpgart interface v0.103 [ +0,000049] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ +0,000185] i8042: PNP: No PS/2 controller found. [ +0,000042] mousedev: PS/2 mouse device common for all mice [ +0,000014] rtc_cmos 00:02: RTC can wake from S4 [ +0,000210] rtc_cmos 00:02: registered as rtc0 [ +0,000036] rtc_cmos 00:02: setting system clock to 2024-01-02T12:39:43 UTC (1704199183) [ +0,000024] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram [ +0,000091] intel_pstate: Intel P-state driver initializing [ +0,000179] ledtrig-cpu: registered to indicate activity on CPUs [ +0,000192] efifb: probing for efifb [ +0,000012] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k [ +0,000002] efifb: mode is 1024x768x32, linelength=4096, pages=1 [ +0,000001] efifb: scrolling: redraw [ +0,000000] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ +0,000065] Console: switching to colour frame buffer device 128x48 [ +0,000565] fb0: EFI VGA frame buffer device [ +0,009460] NET: Registered PF_INET6 protocol family [ +0,003790] Segment Routing with IPv6 [ +0,000011] In-situ OAM (IOAM) with IPv6 [ +0,000023] mip6: Mobile IPv6 [ +0,000005] NET: Registered PF_PACKET protocol family [ +0,000034] mpls_gso: MPLS GSO support [ +0,000172] microcode: sig=0x306c3, pf=0x2, revision=0x28 [ +0,000011] microcode: Microcode Update Driver: v2.2. [ +0,000005] IPI shorthand broadcast: enabled [ +0,000023] sched_clock: Marking stable (592117820, 168218)->(6110396828, -5518110790) [ +0,000166] registered taskstats version 1 [ +0,000008] Loading compiled-in X.509 certificates [ +0,016661] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ +0,000014] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ +0,000425] zswap: loaded using pool lzo/zbud [ +0,000238] Key type .fscrypt registered [ +0,000002] Key type fscrypt-provisioning registered [ +0,003414] Key type encrypted registered [ +0,000004] AppArmor: AppArmor sha1 policy hashing enabled [ +0,000202] integrity: Loading X.509 certificate: UEFI:db [ +0,000025] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ +0,000001] integrity: Loading X.509 certificate: UEFI:db [ +0,000016] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ +0,000715] ima: No TPM chip found, activating TPM-bypass! [ +0,000002] ima: Allocated hash algorithm: sha256 [ +0,000008] ima: No architecture policies found [ +0,000009] evm: Initialising EVM extended attributes: [ +0,000000] evm: security.selinux [ +0,000001] evm: security.SMACK64 (disabled) [ +0,000001] evm: security.SMACK64EXEC (disabled) [ +0,000000] evm: security.SMACK64TRANSMUTE (disabled) [ +0,000001] evm: security.SMACK64MMAP (disabled) [ +0,000000] evm: security.apparmor [ +0,000001] evm: security.ima [ +0,000000] evm: security.capability [ +0,000001] evm: HMAC attrs: 0x1 [ +0,088959] Freeing unused decrypted memory: 2036K [ +0,000375] Freeing unused kernel image (initmem) memory: 2792K [ +0,012600] Write protecting the kernel read-only data: 26624k [ +0,000386] Freeing unused kernel image (text/rodata gap) memory: 2040K [ +0,000152] Freeing unused kernel image (rodata/data gap) memory: 1192K [ +0,054171] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ +0,000002] x86/mm: Checking user space page tables [ +0,043136] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ +0,000007] Run /init as init process [ +0,000001] with arguments: [ +0,000002] /init [ +0,000000] with environment: [ +0,000001] HOME=/ [ +0,000000] TERM=linux [ +0,000001] BOOT_IMAGE=/vmlinuz-6.1.0-16-amd64 [ +0,075041] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ +0,011696] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ +0,000052] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ +0,016626] ACPI: button: Power Button [PWRB] [ +0,000009] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20220331/utaddress-204) [ +0,000010] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,002033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ +0,000029] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ +0,000008] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,000084] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ +0,000006] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ +0,000006] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,000016] ACPI: button: Power Button [PWRF] [ +0,000037] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20220331/utaddress-204) [ +0,000005] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20220331/utaddress-204) [ +0,000005] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ +0,000001] lpc_ich: Resource conflict(s) found affecting gpio_ich [ +0,006192] ACPI: bus type USB registered [ +0,000032] usbcore: registered new interface driver usbfs [ +0,000010] usbcore: registered new interface driver hub [ +0,000013] usbcore: registered new device driver usb [ +0,000649] i2c i2c-0: 1/2 memory slots populated (from DMI) [ +0,017372] e1000e: Intel(R) PRO/1000 Network Driver [ +0,000004] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ +0,000194] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ +0,007096] ehci-pci 0000:00:1a.0: EHCI Host Controller [ +0,000010] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ +0,000017] ehci-pci 0000:00:1a.0: debug port 2 [ +0,002793] SCSI subsystem initialized [ +0,001151] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c3c000 [ +0,000811] ACPI: bus type drm_connector registered [ +0,016079] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ +0,000070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ +0,000003] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000003] usb usb1: Product: EHCI Host Controller [ +0,000001] usb usb1: Manufacturer: Linux 6.1.0-16-amd64 ehci_hcd [ +0,000002] usb usb1: SerialNumber: 0000:00:1a.0 [ +0,000162] hub 1-0:1.0: USB hub found [ +0,000010] hub 1-0:1.0: 2 ports detected [ +0,000160] xhci_hcd 0000:00:14.0: xHCI Host Controller [ +0,000008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ +0,001076] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ +0,000187] ehci-pci 0000:00:1d.0: EHCI Host Controller [ +0,000006] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ +0,000020] ehci-pci 0000:00:1d.0: debug port 2 [ +0,000011] xhci_hcd 0000:00:14.0: xHCI Host Controller [ +0,000005] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ +0,000003] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ +0,000044] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ +0,000003] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000002] usb usb2: Product: xHCI Host Controller [ +0,000002] usb usb2: Manufacturer: Linux 6.1.0-16-amd64 xhci-hcd [ +0,000002] usb usb2: SerialNumber: 0000:00:14.0 [ +0,000149] hub 2-0:1.0: USB hub found [ +0,000024] hub 2-0:1.0: 15 ports detected [ +0,001717] libata version 3.00 loaded. [ +0,001963] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c3b000 [ +0,000448] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ +0,000005] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000002] usb usb4: Product: xHCI Host Controller [ +0,000002] usb usb4: Manufacturer: Linux 6.1.0-16-amd64 xhci-hcd [ +0,000001] usb usb4: SerialNumber: 0000:00:14.0 [ +0,000316] hub 4-0:1.0: USB hub found [ +0,000018] hub 4-0:1.0: 6 ports detected [ +0,002873] ahci 0000:00:1f.2: version 3.0 [ +0,000168] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ +0,000003] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ +0,000320] scsi host0: ahci [ +0,001116] scsi host1: ahci [ +0,000128] scsi host2: ahci [ +0,000111] scsi host3: ahci [ +0,000048] ata1: SATA max UDMA/133 abar m2048@0xf7c3a000 port 0xf7c3a100 irq 26 [ +0,000003] ata2: DUMMY [ +0,000001] ata3: DUMMY [ +0,000001] ata4: DUMMY [ +0,008800] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ +0,000052] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ +0,000003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ +0,000001] usb usb3: Product: EHCI Host Controller [ +0,000001] usb usb3: Manufacturer: Linux 6.1.0-16-amd64 ehci_hcd [ +0,000001] usb usb3: SerialNumber: 0000:00:1d.0 [ +0,000106] hub 3-0:1.0: USB hub found [ +0,000006] hub 3-0:1.0: 2 ports detected [ +0,039668] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ +0,068509] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 64:00:6a:84:80:20 [ +0,000005] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ +0,000057] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ +0,123853] tsc: Refined TSC clocksource calibration: 3092.836 MHz [ +0,000008] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ +0,000035] clocksource: Switched to clocksource tsc [ +0,003749] usb 1-1: new high-speed USB device number 2 using ehci-pci [ +0,008002] usb 2-3: new full-speed USB device number 2 using xhci_hcd [ +0,012020] usb 3-1: new high-speed USB device number 2 using ehci-pci [ +0,051680] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ +0,084714] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ +0,000013] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ +0,000649] hub 1-1:1.0: USB hub found [ +0,000163] hub 1-1:1.0: 6 ports detected [ +0,001083] usb 2-3: New USB device found, idVendor=1997, idProduct=2433, bcdDevice=20.08 [ +0,000012] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000006] usb 2-3: Product: Mini Keyboard [ +0,000004] usb 2-3: Manufacturer: [ +0,018056] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ +0,000013] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ +0,000706] hub 3-1:1.0: USB hub found [ +0,000123] hub 3-1:1.0: 8 ports detected [ +0,002927] hid: raw HID events driver (C) Jiri Kosina [ +0,103986] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ +0,021538] usb 4-2: New USB device found, idVendor=4971, idProduct=8017, bcdDevice=81.05 [ +0,000013] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000006] usb 4-2: Product: USB to ATA/ATAPI Bridge [ +0,000004] usb 4-2: Manufacturer: JMicron [ +0,000004] usb 4-2: SerialNumber: 111122223333 [ +0,016204] usbcore: registered new interface driver usb-storage [ +0,110109] usb 2-4: new high-speed USB device number 3 using xhci_hcd [ +0,008913] ata1.00: ATA-8: TOSHIBA MQ02ABF050H, HDF01D, max UDMA/100 [ +0,002029] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ +0,000015] ata1.00: Features: NCQ-sndrcv [ +0,003511] ata1.00: configured for UDMA/100 [ +0,000478] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ02ABF0 1D PQ: 0 ANSI: 5 [ +0,011331] usbcore: registered new interface driver usbhid [ +0,000009] usbhid: USB HID core driver [ +0,000718] scsi host4: uas [ +0,000143] usbcore: registered new interface driver uas [ +0,000603] scsi 4:0:0:0: Direct-Access ST8000VN 004-2M2101 8105 PQ: 0 ANSI: 6 [ +0,000941] input: Mini Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:1997:2433.0001/input/input2 [ +0,009642] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ +0,000005] sd 0:0:0:0: [sda] 4096-byte physical blocks [ +0,000012] sd 0:0:0:0: [sda] Write Protect is off [ +0,000003] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ +0,000015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000020] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ +0,000414] sd 4:0:0:0: [sdb] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB) [ +0,000003] sd 4:0:0:0: [sdb] 4096-byte physical blocks [ +0,000184] sd 4:0:0:0: [sdb] Write Protect is off [ +0,000003] sd 4:0:0:0: [sdb] Mode Sense: 53 00 00 08 [ +0,000316] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ +0,000002] sd 4:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ +0,000001] sd 4:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes) [ +0,002626] sda: sda1 sda2 sda3 [ +0,000110] sd 0:0:0:0: [sda] Attached SCSI disk [ +0,001917] e1000e 0000:00:19.0 eno1: renamed from eth0 [ +0,024608] sdb: sdb1 sdb2 [ +0,000149] sd 4:0:0:0: [sdb] Attached SCSI disk [ +0,019293] hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.01 Keyboard [ Mini Keyboard] on usb-0000:00:14.0-3/input0 [ +0,000168] input: Mini Keyboard Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:1997:2433.0002/input/input3 [ +0,000044] input: Mini Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:1997:2433.0002/input/input4 [ +0,059766] input: Mini Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.1/0003:1997:2433.0002/input/input5 [ +0,000059] hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.01 Mouse [ Mini Keyboard] on usb-0000:00:14.0-3/input1 [ +0,006594] usb 2-4: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.24 [ +0,000004] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000003] usb 2-4: Product: USB2.0 Hub [ +0,000002] usb 2-4: Manufacturer: VIA Labs, Inc. [ +0,000924] hub 2-4:1.0: USB hub found [ +0,000151] hub 2-4:1.0: 4 ports detected [ +0,170625] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ +0,000028] device-mapper: uevent: version 1.0.3 [ +0,000052] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ +0,004910] Console: switching to colour dummy device 80x25 [ +0,000401] i915 0000:00:02.0: vgaarb: deactivate vga console [ +0,004745] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ +0,023441] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 [ +0,001169] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) [ +0,000182] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ +0,172460] usb 4-4: new SuperSpeed USB device number 3 using xhci_hcd [ +0,047235] fbcon: i915drmfb (fb0) is primary device [ +0,040430] Console: switching to colour frame buffer device 240x67 [ +0,018137] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ +0,499460] PM: Image not found (code -22) [ +0,097807] usb 4-4: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.24 [ +0,000006] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 4-4: Product: USB3.0 Hub [ +0,000002] usb 4-4: Manufacturer: VIA Labs, Inc. [ +0,001423] hub 4-4:1.0: USB hub found [ +0,000151] hub 4-4:1.0: 4 ports detected [ +0,024636] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Quota mode: none. [ +0,056600] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ +0,044311] usb 2-9: new low-speed USB device number 4 using xhci_hcd [ +0,087862] systemd[1]: Inserted module 'autofs4' [ +0,032062] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ +0,000007] systemd[1]: Detected architecture x86-64. [ +0,003416] systemd[1]: Hostname set to . [ +0,044540] usb 2-9: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.02 [ +0,000007] usb 2-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 2-9: Product: USB Keyboard [ +0,000002] usb 2-9: Manufacturer: Logitech [ +0,006108] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.0/0003:046D:C31C.0003/input/input7 [ +0,062127] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-9/input0 [ +0,006009] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C31C.0004/input/input8 [ +0,057832] usb 2-4.2: new high-speed USB device number 5 using xhci_hcd [ +0,000050] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb2/2-9/2-9:1.1/0003:046D:C31C.0004/input/input9 [ +0,000089] hid-generic 0003:046D:C31C.0004: input,hiddev0,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-9/input1 [ +0,033051] systemd[1]: Queued start job for default target graphical.target. [ +0,019718] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ +0,000302] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ +0,000243] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ +0,000184] systemd[1]: Created slice user.slice - User and Session Slice. [ +0,000067] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ +0,000161] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ +0,000067] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ +0,000052] systemd[1]: Reached target slices.target - Slice Units. [ +0,000028] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ +0,000069] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. [ +0,000107] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. [ +0,002892] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. [ +0,000149] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ +0,000067] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ +0,000261] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ +0,000111] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ +0,000123] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ +0,000156] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. [ +0,000369] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ +0,000090] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ +0,000712] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ +0,000707] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ +0,000871] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ +0,001031] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ +0,000167] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ +0,000144] systemd[1]: Finished blk-availability.service - Availability of block devices. [ +0,002145] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ +0,000867] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ +0,000821] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ +0,001211] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ +0,001215] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ +0,001388] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ +0,001514] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ +0,001524] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ +0,001479] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ +0,000211] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ +0,002094] systemd[1]: Starting systemd-journald.service - Journal Service... [ +0,003623] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ +0,000974] systemd[1]: Starting systemd-network-generator.service - Generate network units from Kernel command line... [ +0,001326] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ +0,000574] pstore: Using crash dump compression: deflate [ +0,001347] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ +0,002244] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ +0,002898] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ +0,001217] loop: module loaded [ +0,000527] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ +0,000947] pstore: Registered efi as persistent store backend [ +0,001007] fuse: init (API version 7.37) [ +0,001708] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ +0,000519] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ +0,000684] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ +0,000912] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ +0,000387] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ +0,000136] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ +0,000251] systemd[1]: modprobe@drm.service: Deactivated successfully. [ +0,000112] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ +0,000238] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ +0,000110] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ +0,000291] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ +0,000185] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ +0,000382] systemd[1]: modprobe@loop.service: Deactivated successfully. [ +0,000177] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ +0,000335] systemd[1]: Finished systemd-network-generator.service - Generate network units from Kernel command line. [ +0,000885] systemd[1]: Reached target network-pre.target - Preparation for Network. [ +0,001289] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ +0,000819] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ +0,000135] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ +0,002690] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ +0,000693] EXT4-fs (dm-5): re-mounted. Quota mode: none. [ +0,001703] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ +0,000473] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ +0,000216] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ +0,000934] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ +0,017728] lp: driver loaded but no devices found [ +0,009536] ppdev: user-space parallel port driver [ +0,010634] systemd[1]: Started systemd-journald.service - Journal Service. [ +0,016250] usb 2-4.2: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000007] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 2-4.2: Product: RTL2838UHIDIR [ +0,000002] usb 2-4.2: Manufacturer: Realtek [ +0,000002] usb 2-4.2: SerialNumber: 00000001 [ +0,068647] usb 4-4.3: new SuperSpeed USB device number 4 using xhci_hcd [ +0,023023] usb 4-4.3: New USB device found, idVendor=2109, idProduct=0817, bcdDevice=90.24 [ +0,000005] usb 4-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 4-4.3: Product: USB3.0 Hub [ +0,000001] usb 4-4.3: Manufacturer: VIA Labs, Inc. [ +0,059845] hub 4-4.3:1.0: USB hub found [ +0,000828] hub 4-4.3:1.0: 4 ports detected [ +0,063044] mc: Linux media interface: v0.10 [ +0,004998] usb 2-4.3: new high-speed USB device number 6 using xhci_hcd [ +0,039537] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ +0,007244] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ +0,015322] usb 2-4.2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,068513] usb 2-4.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000016] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000005] usb 2-4.2: media controller created [ +0,000421] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,025322] usb 2-4.3: New USB device found, idVendor=2109, idProduct=2817, bcdDevice=90.24 [ +0,000008] usb 2-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000002] usb 2-4.3: Product: USB2.0 Hub [ +0,000002] usb 2-4.3: Manufacturer: VIA Labs, Inc. [ +0,001059] hub 2-4.3:1.0: USB hub found [ +0,000232] hub 2-4.3:1.0: 4 ports detected [ +0,064001] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ +0,000386] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ +0,000255] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ +0,000285] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ +0,007083] i2c i2c-9: Added multiplexed i2c bus 10 [ +0,000006] rtl2832 9-0010: Realtek RTL2832 successfully attached [ +0,000015] usb 2-4.2: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000007] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,001414] input: PC Speaker as /devices/platform/pcspkr/input/input10 [ +0,001781] iTCO_vendor_support: vendor-support=0 [ +0,000892] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ +0,001048] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ +0,026917] iTCO_wdt iTCO_wdt.1.auto: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860) [ +0,000153] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ +0,000542] r820t 10-001a: creating new instance [ +0,006836] r820t 10-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,021603] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.4) [ +0,029339] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ +0,000005] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ +0,000001] RAPL PMU: hw unit of domain package 2^-14 Joules [ +0,000001] RAPL PMU: hw unit of domain dram 2^-14 Joules [ +0,000002] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ +0,033271] cryptd: max_cpu_qlen set to 1000 [ +0,025575] AVX2 version of gcm_enc/dec engaged. [ +0,000032] AES CTR mode by8 optimization enabled [ +0,014514] snd_hda_intel 0000:00:03.0: enabling device (0100 -> 0102) [ +0,012614] Adding 17575932k swap on /dev/mapper/vg0-swap. Priority:-2 extents:1 across:17575932k FS [ +0,000502] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ +0,023112] videodev: Linux video capture interface: v2.00 [ +0,041221] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11 [ +0,000066] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ +0,000059] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ +0,010414] rtl2832_sdr rtl2832_sdr.2.auto: Registered as swradio0 [ +0,000006] rtl2832_sdr rtl2832_sdr.2.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.2.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,008378] Registered IR keymap rc-empty [ +0,000039] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/rc/rc0 [ +0,000326] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ +0,000041] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/rc/rc0/input14 [ +0,000068] usb 2-4.2: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,008086] usb 2-4.2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,000058] usbcore: registered new interface driver dvb_usb_rtl28xxu [ +0,005004] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ +0,000006] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ +0,000002] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: inputs: [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19 [ +0,000002] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x1b [ +0,000001] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a [ +0,069945] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ +0,001265] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16 [ +0,000086] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17 [ +0,130182] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ +0,009690] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: none. [ +0,003887] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: none. [ +0,004398] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Quota mode: none. [ +0,009494] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Quota mode: none. [ +0,013433] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none. [ +0,011041] systemd-journald[297]: Received client request to flush runtime journal. [ +0,056185] intel_rapl_common: Found RAPL domain package [ +0,000003] intel_rapl_common: Found RAPL domain core [ +0,000001] intel_rapl_common: Found RAPL domain uncore [ +0,000001] intel_rapl_common: Found RAPL domain dram [ +0,000004] intel_rapl_common: RAPL package-0 domain package locked by BIOS [ +0,000005] intel_rapl_common: RAPL package-0 domain dram locked by BIOS [ +0,071973] audit: type=1400 audit(1704199187.510:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=633 comm="apparmor_parser" [ +0,000603] audit: type=1400 audit(1704199187.510:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=634 comm="apparmor_parser" [ +0,000005] audit: type=1400 audit(1704199187.510:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=634 comm="apparmor_parser" [ +0,009564] audit: type=1400 audit(1704199187.518:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=635 comm="apparmor_parser" [ +0,000007] audit: type=1400 audit(1704199187.518:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=635 comm="apparmor_parser" [ +0,000003] audit: type=1400 audit(1704199187.518:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=635 comm="apparmor_parser" [ +0,000004] audit: type=1400 audit(1704199187.518:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=635 comm="apparmor_parser" [ +0,002548] audit: type=1400 audit(1704199187.522:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=636 comm="apparmor_parser" [ +0,000008] audit: type=1400 audit(1704199187.522:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=636 comm="apparmor_parser" [ +0,129990] usb 2-4.4: new high-speed USB device number 7 using xhci_hcd [ +0,164423] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000011] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000005] usb 2-4.4: Product: RTL2838UHIDIR [ +0,000004] usb 2-4.4: Manufacturer: Realtek [ +0,000003] usb 2-4.4: SerialNumber: 00000001 [ +0,007930] usb 2-4.4: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,054737] usb 2-4.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000014] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000004] usb 2-4.4: media controller created [ +0,000204] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002693] i2c i2c-11: Added multiplexed i2c bus 12 [ +0,000004] rtl2832 11-0010: Realtek RTL2832 successfully attached [ +0,000013] usb 2-4.4: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000008] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000064] r820t 12-001a: creating new instance [ +0,006806] r820t 12-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,001913] rtl2832_sdr rtl2832_sdr.3.auto: Registered as swradio1 [ +0,000005] rtl2832_sdr rtl2832_sdr.3.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.3.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006684] Registered IR keymap rc-empty [ +0,000022] rc rc1: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc1 [ +0,000046] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter [ +0,000037] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc1/input18 [ +0,000103] usb 2-4.4: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,011978] usb 2-4.4: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,206322] usb 2-4.3.1: new high-speed USB device number 8 using xhci_hcd [ +0,164400] usb 2-4.3.1: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000014] usb 2-4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000006] usb 2-4.3.1: Product: RTL2838UHIDIR [ +0,000004] usb 2-4.3.1: Manufacturer: Realtek [ +0,000004] usb 2-4.3.1: SerialNumber: 00000001 [ +0,008184] usb 2-4.3.1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,056855] usb 2-4.3.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000009] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000004] usb 2-4.3.1: media controller created [ +0,000296] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,003432] i2c i2c-13: Added multiplexed i2c bus 14 [ +0,000004] rtl2832 13-0010: Realtek RTL2832 successfully attached [ +0,000014] usb 2-4.3.1: DVB: registering adapter 2 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000008] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000100] r820t 14-001a: creating new instance [ +0,006865] r820t 14-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,002253] rtl2832_sdr rtl2832_sdr.4.auto: Registered as swradio2 [ +0,000005] rtl2832_sdr rtl2832_sdr.4.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.4.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006730] Registered IR keymap rc-empty [ +0,000036] rc rc2: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.1/rc/rc2 [ +0,000041] rc rc2: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 2, raw IR receiver, no transmitter [ +0,000038] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.1/rc/rc2/input19 [ +0,000076] usb 2-4.3.1: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,011959] usb 2-4.3.1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,037288] RPC: Registered named UNIX socket transport module. [ +0,000003] RPC: Registered udp transport module. [ +0,000001] RPC: Registered tcp transport module. [ +0,000000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ +0,097337] usb 2-4.3.3: new high-speed USB device number 9 using xhci_hcd [ +0,174490] usb 2-4.3.3: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000006] usb 2-4.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 2-4.3.3: Product: RTL2838UHIDIR [ +0,000001] usb 2-4.3.3: Manufacturer: Realtek [ +0,000001] usb 2-4.3.3: SerialNumber: 00000001 [ +0,007602] usb 2-4.3.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,054737] usb 2-4.3.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000009] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.3.3: media controller created [ +0,000247] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002237] i2c i2c-15: Added multiplexed i2c bus 16 [ +0,000003] rtl2832 15-0010: Realtek RTL2832 successfully attached [ +0,000011] usb 2-4.3.3: DVB: registering adapter 3 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000005] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000050] r820t 16-001a: creating new instance [ +0,006856] r820t 16-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,001903] rtl2832_sdr rtl2832_sdr.5.auto: Registered as swradio3 [ +0,000002] rtl2832_sdr rtl2832_sdr.5.auto: Realtek RTL2832 SDR attached [ +0,000001] rtl2832_sdr rtl2832_sdr.5.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006678] Registered IR keymap rc-empty [ +0,000020] rc rc3: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.3/rc/rc3 [ +0,000033] rc rc3: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 3, raw IR receiver, no transmitter [ +0,000026] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.3/rc/rc3/input20 [ +0,000051] usb 2-4.3.3: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,012225] usb 2-4.3.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,579523] kauditd_printk_skb: 12 callbacks suppressed [ +0,000003] audit: type=1400 audit(1704199189.358:23): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=768 comm="cupsd" capability=12 capname="net_admin" [ +0,042745] NET: Registered PF_QIPCRTR protocol family [ +0,608864] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ +0,000040] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ +3,933942] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled [ +0,049697] XFS (sdb2): Mounting V5 Filesystem [ +0,205565] XFS (sdb2): Ending clean mount [ 2janv. 13:40] usb 2-4.2: Frontend requested software zigzag, but didn't set the frequency step size [ 2janv. 14:55] perf: interrupt took too long (2540 > 2500), lowering kernel.perf_event_max_sample_rate to 78500 [ 2janv. 15:28] perf: interrupt took too long (3214 > 3175), lowering kernel.perf_event_max_sample_rate to 62000 [ 2janv. 16:43] perf: interrupt took too long (4055 > 4017), lowering kernel.perf_event_max_sample_rate to 49250 [ 2janv. 17:50] perf: interrupt took too long (5073 > 5068), lowering kernel.perf_event_max_sample_rate to 39250 [ 2janv. 20:17] usb 2-4.4: dvb_usb_v2: rc.query() failed=-71 [ +0,250560] usb 2-4.4: USB disconnect, device number 7 [ +0,869299] r820t 12-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +2,391534] r820t 12-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +9,042341] r820t 12-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +0,163884] r820t 12-001a: r820t_write: i2c wr failed=-19 reg=06 len=1: b1 [ +0,000448] r820t 12-001a: destroying instance [ +0,010170] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.4' successfully deinitialized and disconnected [ +2,000865] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ 2janv. 20:18] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,000241] usb 2-4-port4: attempt power cycle [ +2,965717] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +1,847730] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,000279] usb 2-4-port4: unable to enumerate USB device [ 2janv. 21:06] systemd-journald[297]: Data hash table of /var/log/journal/376173662f1d43d0807b42a3a9660019/system.journal has a fill level at 75.0 (110491 of 147320 items, 41943040 file size, 379 bytes per hash table item), suggesting rotation. [ +0,000018] systemd-journald[297]: /var/log/journal/376173662f1d43d0807b42a3a9660019/system.journal: Journal header limits reached or header out-of-date, rotating. [ 2janv. 22:15] systemd-journald[297]: Data hash table of /var/log/journal/376173662f1d43d0807b42a3a9660019/system.journal has a fill level at 75.0 (110491 of 147320 items, 50331648 file size, 455 bytes per hash table item), suggesting rotation. [ +0,000005] systemd-journald[297]: /var/log/journal/376173662f1d43d0807b42a3a9660019/system.journal: Journal header limits reached or header out-of-date, rotating. [ 3janv. 00:00] audit: type=1400 audit(1704236405.235:24): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=131313 comm="cupsd" capability=12 capname="net_admin" [ 3janv. 07:22] usb 2-4.2: dvb_usb_v2: rc.query() failed=-71 [ +0,094729] usb 2-4.2: USB disconnect, device number 5 [ +0,044714] r820t 10-001a: destroying instance [ +0,000961] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.2' successfully deinitialized and disconnected [ +0,463581] usb 2-4.3.1: dvb_usb_v2: rc.query() failed=-71 [ +0,002710] usb 2-4.3.1: USB disconnect, device number 8 [ +0,043944] r820t 14-001a: destroying instance [ +0,003320] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.3.1' successfully deinitialized and disconnected [ +0,297960] usb 2-4.3.3: dvb_usb_v2: rc.query() failed=-71 [ +0,166851] usb 2-4.3.3: USB disconnect, device number 9 [ +0,033526] r820t 16-001a: destroying instance [ +0,000775] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.3.3' successfully deinitialized and disconnected [ 3janv. 07:27] XFS (sdb2): Unmounting Filesystem [ 3janv. 09:00] XFS (sdb2): Mounting V5 Filesystem [ +0,173377] XFS (sdb2): Ending clean mount [ 3janv. 09:01] usb 2-4.4: new high-speed USB device number 14 using xhci_hcd [ +0,164296] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000015] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000005] usb 2-4.4: Product: RTL2838UHIDIR [ +0,000005] usb 2-4.4: Manufacturer: Realtek [ +0,000004] usb 2-4.4: SerialNumber: 00000001 [ +0,007973] usb 2-4.4: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,057255] usb 2-4.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000008] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000005] usb 2-4.4: media controller created [ +0,000269] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,004211] i2c i2c-9: Added multiplexed i2c bus 10 [ +0,000005] rtl2832 9-0010: Realtek RTL2832 successfully attached [ +0,000012] usb 2-4.4: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000007] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000100] r820t 10-001a: creating new instance [ +0,006938] r820t 10-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,003297] rtl2832_sdr rtl2832_sdr.2.auto: Registered as swradio0 [ +0,000004] rtl2832_sdr rtl2832_sdr.2.auto: Realtek RTL2832 SDR attached [ +0,000001] rtl2832_sdr rtl2832_sdr.2.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006977] Registered IR keymap rc-empty [ +0,000049] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc0 [ +0,000067] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ +0,000035] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc0/input21 [ +0,000098] usb 2-4.4: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,012696] usb 2-4.4: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,271288] usb 2-4.2: new high-speed USB device number 15 using xhci_hcd [ +0,163519] usb 2-4.2: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000004] usb 2-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 2-4.2: Product: RTL2838UHIDIR [ +0,000001] usb 2-4.2: Manufacturer: Realtek [ +0,000001] usb 2-4.2: SerialNumber: 00000001 [ +0,007671] usb 2-4.2: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,055348] usb 2-4.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000011] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000004] usb 2-4.2: media controller created [ +0,000247] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002952] i2c i2c-11: Added multiplexed i2c bus 12 [ +0,000005] rtl2832 11-0010: Realtek RTL2832 successfully attached [ +0,000016] usb 2-4.2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000007] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000072] r820t 12-001a: creating new instance [ +0,007520] r820t 12-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,003137] rtl2832_sdr rtl2832_sdr.3.auto: Registered as swradio1 [ +0,000004] rtl2832_sdr rtl2832_sdr.3.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.3.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,010798] Registered IR keymap rc-empty [ +0,000019] rc rc1: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/rc/rc1 [ +0,000027] rc rc1: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 1, raw IR receiver, no transmitter [ +0,000023] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.2/rc/rc1/input22 [ +0,000052] usb 2-4.2: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,008306] usb 2-4.2: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,275989] usb 2-4.3.1: new high-speed USB device number 16 using xhci_hcd [ +0,171513] usb 2-4.3.1: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000005] usb 2-4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000002] usb 2-4.3.1: Product: RTL2838UHIDIR [ +0,000001] usb 2-4.3.1: Manufacturer: Realtek [ +0,000001] usb 2-4.3.1: SerialNumber: 00000001 [ +0,007606] usb 2-4.3.1: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,054729] usb 2-4.3.1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000012] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.3.1: media controller created [ +0,000416] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,003649] i2c i2c-13: Added multiplexed i2c bus 14 [ +0,000005] rtl2832 13-0010: Realtek RTL2832 successfully attached [ +0,000016] usb 2-4.3.1: DVB: registering adapter 2 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000006] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000069] r820t 14-001a: creating new instance [ +0,007328] r820t 14-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,002395] rtl2832_sdr rtl2832_sdr.4.auto: Registered as swradio2 [ +0,000005] rtl2832_sdr rtl2832_sdr.4.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.4.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006803] Registered IR keymap rc-empty [ +0,000033] rc rc2: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.1/rc/rc2 [ +0,000044] rc rc2: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 2, raw IR receiver, no transmitter [ +0,000035] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.1/rc/rc2/input23 [ +0,000127] usb 2-4.3.1: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,011869] usb 2-4.3.1: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +0,129204] usb 2-4.3.3: new high-speed USB device number 17 using xhci_hcd [ +0,167479] usb 2-4.3.3: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000007] usb 2-4.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000003] usb 2-4.3.3: Product: RTL2838UHIDIR [ +0,000002] usb 2-4.3.3: Manufacturer: Realtek [ +0,000001] usb 2-4.3.3: SerialNumber: 00000001 [ +0,008860] usb 2-4.3.3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,055331] usb 2-4.3.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000010] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.3.3: media controller created [ +0,000350] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002847] i2c i2c-15: Added multiplexed i2c bus 16 [ +0,000005] rtl2832 15-0010: Realtek RTL2832 successfully attached [ +0,000017] usb 2-4.3.3: DVB: registering adapter 3 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000007] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000070] r820t 16-001a: creating new instance [ +0,006730] r820t 16-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,002174] rtl2832_sdr rtl2832_sdr.5.auto: Registered as swradio3 [ +0,000004] rtl2832_sdr rtl2832_sdr.5.auto: Realtek RTL2832 SDR attached [ +0,000002] rtl2832_sdr rtl2832_sdr.5.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,006659] Registered IR keymap rc-empty [ +0,000044] rc rc3: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.3/rc/rc3 [ +0,000377] rc rc3: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 3, raw IR receiver, no transmitter [ +0,000049] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.3/2-4.3.3/rc/rc3/input24 [ +0,000085] usb 2-4.3.3: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,011658] usb 2-4.3.3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ 3janv. 09:07] usb 2-4.4: dvb_usb_v2: rc.query() failed=-71 [ +0,311921] usb 2-4.4: USB disconnect, device number 14 [ +1,563949] r820t 10-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +2,699208] r820t 10-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +9,040236] r820t 10-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +9,040933] r820t 10-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ 3janv. 09:08] r820t 10-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +9,041009] r820t 10-001a: r820t_write: i2c wr failed=-19 reg=0c len=1: f9 [ +2,434562] r820t 10-001a: r820t_write: i2c wr failed=-19 reg=06 len=1: b1 [ +0,000105] r820t 10-001a: destroying instance [ +0,000232] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.4' successfully deinitialized and disconnected [ +0,275351] usb 2-4.4: new high-speed USB device number 18 using xhci_hcd [ +1,848017] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +1,845947] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,000279] usb 2-4-port4: attempt power cycle [ +2,979724] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,694135] usb 2-4.4: new high-speed USB device number 21 using xhci_hcd [ +0,033928] usb 2-4.4: New USB device found, idVendor=0bda, idProduct=2838, bcdDevice= 1.00 [ +0,000014] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000006] usb 2-4.4: Product: RTL2838UHIDIR [ +0,000005] usb 2-4.4: Manufacturer: Realtek [ +0,000004] usb 2-4.4: SerialNumber: 00000001 [ +0,008234] usb 2-4.4: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state [ +0,056077] usb 2-4.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer [ +0,000007] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design) [ +0,000003] usb 2-4.4: media controller created [ +0,000191] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. [ +0,002340] i2c i2c-9: Added multiplexed i2c bus 10 [ +0,000005] rtl2832 9-0010: Realtek RTL2832 successfully attached [ +0,000013] usb 2-4.4: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))... [ +0,000009] dvbdev: dvb_create_media_entity: media entity 'Realtek RTL2832 (DVB-T)' registered. [ +0,000073] r820t 10-001a: creating new instance [ +0,006919] r820t 10-001a: Rafael Micro r820t successfully identified, chip type: R820T [ +0,002121] rtl2832_sdr rtl2832_sdr.2.auto: Registered as swradio0 [ +0,000003] rtl2832_sdr rtl2832_sdr.2.auto: Realtek RTL2832 SDR attached [ +0,000001] rtl2832_sdr rtl2832_sdr.2.auto: SDR API is still slightly experimental and functionality changes may follow [ +0,011245] Registered IR keymap rc-empty [ +0,000039] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc0 [ +0,000061] rc rc0: lirc_dev: driver dvb_usb_rtl28xxu registered at minor = 0, raw IR receiver, no transmitter [ +0,000030] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.4/rc/rc0/input25 [ +0,000067] usb 2-4.4: dvb_usb_v2: schedule remote query interval to 200 msecs [ +0,008165] usb 2-4.4: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected [ +10,471298] input: Realtek RTL2832U reference design (lircd bypass) as /devices/virtual/input/input26 [ +0,100062] input: Realtek RTL2832U reference design (lircd bypass) as /devices/virtual/input/input27 [ +0,511865] FS-Cache: Loaded [ +0,086654] Key type dns_resolver registered [ +0,230798] NFS: Registering the id_resolver key type [ +0,000011] Key type id_resolver registered [ +0,000001] Key type id_legacy registered [ +0,565178] BUG: kernel NULL pointer dereference, address: 0000000000000180 [ +0,000008] #PF: supervisor write access in kernel mode [ +0,000003] #PF: error_code(0x0002) - not-present page [ +0,000002] PGD 0 P4D 0 [ +0,000004] Oops: 0002 [#1] PREEMPT SMP PTI [ +0,000004] CPU: 0 PID: 133007 Comm: frontend 0/0 tu Not tainted 6.1.0-16-amd64 #1 Debian 6.1.67-1 [ +0,000003] Hardware name: Dell Inc. OptiPlex 9020M/0Y5DDC, BIOS A05 03/22/2015 [ +0,000002] RIP: 0010:_raw_spin_lock_irqsave+0x23/0x50 [ +0,000008] Code: cc cc cc cc cc cc cc 0f 1f 44 00 00 53 9c 58 0f 1f 40 00 48 89 c3 fa 0f 1f 44 00 00 65 ff 05 74 98 fe 69 31 c0 ba 01 00 00 00 0f b1 17 75 09 48 89 d8 5b c3 cc cc cc cc 89 c6 e8 17 06 00 00 [ +0,000003] RSP: 0018:ffffac8d408fb990 EFLAGS: 00010046 [ +0,000004] RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000019 [ +0,000002] RDX: 0000000000000001 RSI: ffffac8d408fbba0 RDI: 0000000000000180 [ +0,000002] RBP: 0000000000000000 R08: ffff8e0cc9549e01 R09: 000f3ba23610727e [ +0,000002] R10: 0000000000000000 R11: 0000000000000000 R12: ffffac8d408fbba0 [ +0,000003] R13: 0000000000000180 R14: 0000000000000000 R15: ffff8e0cc9549e00 [ +0,000002] FS: 00007fd87e19f6c0(0000) GS:ffff8e0dd6a00000(0000) knlGS:0000000000000000 [ +0,000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0,000003] CR2: 0000000000000180 CR3: 00000001207ec004 CR4: 00000000001706f0 [ +0,000002] Call Trace: [ +0,000003] [ +0,000003] ? __die_body.cold+0x1a/0x1f [ +0,000005] ? page_fault_oops+0xd2/0x2b0 [ +0,000005] ? exc_page_fault+0x70/0x170 [ +0,000005] ? asm_exc_page_fault+0x22/0x30 [ +0,000005] ? _raw_spin_lock_irqsave+0x23/0x50 [ +0,000005] add_wait_queue+0x1d/0xa0 [ +0,000006] dvb_frontend_poll+0x50/0xc0 [dvb_core] [ +0,000018] do_sys_poll+0x2e4/0x610 [ +0,000008] ? poll_initwait+0x40/0x40 [ +0,000004] ? __pollwait+0xe0/0xe0 [ +0,000008] __x64_sys_poll+0xb7/0x140 [ +0,000004] do_syscall_64+0x5b/0xc0 [ +0,000005] ? __rseq_handle_notify_resume+0xa9/0x4a0 [ +0,000004] ? restore_fpregs_from_fpstate+0x42/0xb0 [ +0,000005] ? switch_fpu_return+0x4c/0xd0 [ +0,000003] ? exit_to_user_mode_prepare+0x14b/0x1e0 [ +0,000005] ? syscall_exit_to_user_mode+0x27/0x40 [ +0,000003] ? do_syscall_64+0x67/0xc0 [ +0,000004] ? do_syscall_64+0x67/0xc0 [ +0,000004] ? do_syscall_64+0x67/0xc0 [ +0,000004] entry_SYSCALL_64_after_hwframe+0x64/0xce [ +0,000005] RIP: 0033:0x7fd87ed1b05f [ +0,000003] Code: 54 24 1c 48 89 74 24 10 48 89 7c 24 08 e8 69 96 f8 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 48 8b 7c 24 08 b8 07 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 89 44 24 08 e8 bd 96 f8 ff 8b 44 [ +0,000002] RSP: 002b:00007fd87e19ea90 EFLAGS: 00000293 ORIG_RAX: 0000000000000007 [ +0,000004] RAX: ffffffffffffffda RBX: 000055e9c0c01400 RCX: 00007fd87ed1b05f [ +0,000002] RDX: 000000000000000a RSI: 0000000000000001 RDI: 00007fd87e19eb00 [ +0,000002] RBP: 00007fd87e19eb00 R08: 0000000000000000 R09: 00007fd87e19eb00 [ +0,000003] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000080046f45 [ +0,000002] R13: 000055e9c0c01b30 R14: 0000000000000000 R15: 00000000000003e8 [ +0,000003] [ +0,000002] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs uinput xfs libcrc32c qrtr sunrpc binfmt_misc intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp nls_ascii coretemp nls_cp437 vfat fat kvm_intel kvm irqbypass ghash_clmulni_intel joydev sha512_ssse3 sha512_generic snd_ctl_led sha256_ssse3 sha1_ssse3 rtl2832_sdr videobuf2_vmalloc videobuf2_memops snd_hda_codec_realtek videobuf2_v4l2 videobuf2_common snd_hda_codec_hdmi snd_hda_codec_generic mei_wdt mei_hdcp videodev snd_hda_intel aesni_intel snd_intel_dspcfg crypto_simd snd_intel_sdw_acpi ledtrig_audio snd_hda_codec cryptd rapl dell_smbios dell_wmi_descriptor dcdbas intel_cstate snd_hda_core snd_hwdep r820t iTCO_wdt snd_pcm intel_pmc_bxt iTCO_vendor_support snd_timer mei_me rtl2832 snd intel_uncore i2c_mux watchdog mei pcspkr soundcore cfg80211 rfkill dvb_usb_rtl28xxu evdev dvb_usb_v2 sg dvb_core mc parport_pc ppdev lp parport fuse loop efi_pstore configfs [ +0,000081] efivarfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic dm_mod i915 sd_mod t10_pi hid_generic crc64_rocksoft crc64 crc_t10dif crct10dif_generic usbhid drm_buddy uas i2c_algo_bit usb_storage hid drm_display_helper cec ahci libahci rc_core ttm libata drm_kms_helper xhci_pci xhci_hcd ehci_pci crct10dif_pclmul crct10dif_common scsi_mod ehci_hcd crc32_pclmul drm usbcore e1000e scsi_common crc32c_intel lpc_ich i2c_i801 i2c_smbus usb_common video wmi button [ +0,000049] CR2: 0000000000000180 [ +0,000003] ---[ end trace 0000000000000000 ]--- [ +0,015563] RIP: 0010:_raw_spin_lock_irqsave+0x23/0x50 [ +0,000009] Code: cc cc cc cc cc cc cc 0f 1f 44 00 00 53 9c 58 0f 1f 40 00 48 89 c3 fa 0f 1f 44 00 00 65 ff 05 74 98 fe 69 31 c0 ba 01 00 00 00 0f b1 17 75 09 48 89 d8 5b c3 cc cc cc cc 89 c6 e8 17 06 00 00 [ +0,000002] RSP: 0018:ffffac8d408fb990 EFLAGS: 00010046 [ +0,000002] RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000019 [ +0,000002] RDX: 0000000000000001 RSI: ffffac8d408fbba0 RDI: 0000000000000180 [ +0,000001] RBP: 0000000000000000 R08: ffff8e0cc9549e01 R09: 000f3ba23610727e [ +0,000002] R10: 0000000000000000 R11: 0000000000000000 R12: ffffac8d408fbba0 [ +0,000001] R13: 0000000000000180 R14: 0000000000000000 R15: ffff8e0cc9549e00 [ +0,000001] FS: 00007fd87e19f6c0(0000) GS:ffff8e0dd6a00000(0000) knlGS:0000000000000000 [ +0,000002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0,000002] CR2: 0000000000000180 CR3: 00000001207ec004 CR4: 00000000001706f0 [ +0,000001] note: frontend 0/0 tu[133007] exited with irqs disabled [ +0,000037] note: frontend 0/0 tu[133007] exited with preempt_count 1 [ 3janv. 09:13] usb 2-4.4: dvb_usb_v2: rc.query() failed=-71 [ +0,239674] usb 2-4.4: USB disconnect, device number 21 [ +0,061447] r820t 10-001a: destroying instance [ +0,000211] dvb_usb_v2: 'Realtek RTL2832U reference design:2-4.4' successfully deinitialized and disconnected [ +0,270107] usb 2-4.4: new high-speed USB device number 22 using xhci_hcd [ +1,850198] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +1,846207] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,000291] usb 2-4-port4: attempt power cycle [ +3,010272] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +1,862846] usb 2-4-port4: Cannot enable. Maybe the USB cable is bad? [ +0,000200] usb 2-4-port4: unable to enumerate USB device [ 3janv. 09:21] perf: interrupt took too long (6369 > 6341), lowering kernel.perf_event_max_sample_rate to 31250 [ 3janv. 11:44] usb 4-1: new SuperSpeed USB device number 5 using xhci_hcd [ +0,033457] usb 4-1: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01 [ +0,000019] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000007] usb 4-1: Product: DataTraveler 3.0 [ +0,000005] usb 4-1: Manufacturer: Kingston [ +0,000006] usb 4-1: SerialNumber: E0D55EA574A8F7517837030E [ +0,088001] usb-storage 4-1:1.0: USB Mass Storage device detected [ +0,000331] scsi host5: usb-storage 4-1:1.0 [ +1,014168] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ +0,000196] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ +0,000234] sd 5:0:0:0: [sdc] 241660916 512-byte logical blocks: (124 GB/115 GiB) [ +0,000172] sd 5:0:0:0: [sdc] Write Protect is off [ +0,000003] sd 5:0:0:0: [sdc] Mode Sense: 4f 00 00 00 [ +0,000173] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ +0,003909] sdc: sdc1 [ +0,000176] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ +6,926719] usb 4-1: USB disconnect, device number 5 [ +1,040367] usb 2-3: USB disconnect, device number 2 [ +3,344063] usb 4-3: new SuperSpeed USB device number 6 using xhci_hcd [ +0,033152] usb 4-3: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01 [ +0,000016] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ +0,000007] usb 4-3: Product: DataTraveler 3.0 [ +0,000006] usb 4-3: Manufacturer: Kingston [ +0,000005] usb 4-3: SerialNumber: E0D55EA574A8F7517837030E [ +0,087890] usb-storage 4-3:1.0: USB Mass Storage device detected [ +0,000141] scsi host5: usb-storage 4-3:1.0 [ +1,010906] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ +0,000149] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ +0,000285] sd 5:0:0:0: [sdc] 241660916 512-byte logical blocks: (124 GB/115 GiB) [ +0,000158] sd 5:0:0:0: [sdc] Write Protect is off [ +0,000002] sd 5:0:0:0: [sdc] Mode Sense: 4f 00 00 00 [ +0,000161] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ +0,003004] sdc: sdc1 [ +0,000129] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ +10,154736] ISO 9660 Extensions: Microsoft Joliet Level 3 [ +0,000889] ISO 9660 Extensions: Microsoft Joliet Level 3 [ +0,000507] ISO 9660 Extensions: RRIP_1991A [ +8,603725] usb 2-1: new low-speed USB device number 26 using xhci_hcd [ +0,152207] usb 2-1: New USB device found, idVendor=046d, idProduct=c016, bcdDevice= 3.40 [ +0,000017] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ +0,000008] usb 2-1: Product: Optical USB Mouse [ +0,000005] usb 2-1: Manufacturer: Logitech [ +0,009492] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C016.0005/input/input28 [ +0,000167] hid-generic 0003:046D:C016.0005: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:14.0-1/input0