bon … bonjour,
j’ai une image .iso à plaquer sur un dvd pour booter dessus avec un autre pc winNT(plus pour longtemps).
c’est l’image iso de smoothwall ou de ipcop (j’ai testé les deux).
Je grave, mais une fois inseré dans le pc (l’autre), ça boote style :
boot cdrom … failure
c’est pas au niveau du bios, parce que j’arrive à booter sur un cd d’install debian.
Donc je grave mal. Comment graver en k3b un dvd bootable sur la base de l’une des images iso que j’ai à disposition ?
Ou en ligne de commande, d’ailleurs j’ai essayé ça :
~$ cdrecord -v -dao speed=8 dev=/dev/hdc Downloads/Sources/Iso/ipcop-1.4.16-install-cd.i386.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.2
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision : 'DL11'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0014 (DVD-RW sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording) (current)
Profile: 0x0013 (DVD-RW restricted overwrite) (current)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 14400 kB/s 81x CD 10x DVD
FIFO size : 12582912 = 12288 KB
Track 01: data 46 MB
Total size: 52 MB (05:14.70) = 23603 sectors
Lout start: 53 MB (05:16/53) = 23603 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2274893
Speed set to 2770 KB/s
Starting to write CD/DVD at speed 2.0 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 46 of 46 MB written (fifo 100%) [buf 98%] 2.1x.
Track 01: Total bytes read/written: 48338944/48338944 (23603 sectors).
Writing time: 65.226s
Average write speed 0.6x.
Min drive buffer fill was 93%
Fixating...
Fixating time: 377.593s
j’ai ma galette … inbootable
avec k3b, j’ai essayé burn un dvd image iso, dvd data, pareil, no way to boot.
astuce ? ou suis-je une galette ?
