Au dessus de la zone quand tu écris commentaire tu devrais voir les balises, l’un deux est “code”, clique dessus et tu le verras s’ajouter sur ton commentaire, ensuite tu écris au milieu des deux qui se sont ajouté.
Tu peux utilisé celui de “quote” aussi, c’est même préférable.
Ok, j’ai compris comment faire.
Mais quel est l’intérêt dans un forum, ne vaut-il pas mieux des fichier attachés ?
Mettre tous en texte cela fait des pages !!
Je suis pas contre.
Mais faut avoir un lecteur pdf dans ton cas 
[quote]joel@debian:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4
(Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=d81c44b6-7c1c-41c5-ab1b-c1a53628753f ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff60000-0x00000000bff69fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff6a000-0x00000000bff7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: FUJITSU SIEMENS AMILO Xa 2528/XTB71___, BIOS 1.0S-4C15-
000\xffffffb8 11/12/08
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbff60 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f79d0-0x000f79df] mapped at
[ffff8800000f79d0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfdfffff]
[ 0.000000] [mem 0xbfc00000-0xbfdfffff] page 2M
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc000000-0xbfbfffff]
[ 0.000000] [mem 0xbc000000-0xbfbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
[ 0.000000] [mem 0x80000000-0xbbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xbfe00000-0xbff5ffff]
[ 0.000000] [mem 0xbfe00000-0xbff5ffff] page 4k
[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36376000-0x371b2fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7A10 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x00000000BFF64F52 000040 (v01 FSC PC 06040000 LTP
00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF69B9A 000074 (v01 NVIDIA MCP51M 06040000
PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 0x00000000BFF64F92 004C08 (v01 FIC XTB71___ 06040000
MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BFF6AFC0 000040
[ 0.000000] ACPI: SLIC 0x00000000BFF69C0E 000176 (v01 FSC PC 06040000 LOHR
0000005A)
[ 0.000000] ACPI: SSDT 0x00000000BFF69D84 000182 (v01 PTLTD POWERNOW 06040000
LTP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BFF69F06 00003C (v01 PTLTD MCFG 06040000
LTP 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF69F42 000038 (v01 PTLTD HPETTBL 06040000
LTP 00000001)
[ 0.000000] ACPI: APIC 0x00000000BFF69F7A 00005E (v01 PTLTD ? APIC 06040000 LTP
00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFF69FD8 000028 (v01 PTLTD $SBFTBL$ 06040000
LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bff5ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbff5ffff]
[ 0.000000] NODE_DATA [mem 0xbff5b000-0xbff5ffff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc400000-ffff8800bedfffff] on
node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbff5ffff]
[ 0.000000] On node 0 totalpages: 786172
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10694 pages used for memmap
[ 0.000000] DMA32 zone: 782176 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfa00000 s80896 r8192 d21504
u1048576
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u1048576 alloc=12097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775401
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64
root=UUID=d81c44b6-7c1c-41c5-ab1b-c1a53628753f ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture…
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xfebe000000-0xfebfffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 3075288K/3144688K available (5209K kernel code, 946K rwdata, 1832K
rodata, 1204K init, 840K bss, 69400K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1603.315 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency… 3206.63
BogoMIPS (lpj=6413260)
[ 0.004022] pid_max: default: 32768 minimum: 301
[ 0.004040] ACPI: Core revision 20140424
[ 0.015020] ACPI: All ACPI Tables successfully acquired
[ 0.016071] Security Framework initialized
[ 0.016085] AppArmor: AppArmor disabled by boot time parameter
[ 0.016088] Yama: disabled by default; enable with sysctl kernel.yama.
[ 0.016698] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028986] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.032754] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.032767] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033279] Initializing cgroup subsys memory
[ 0.033289] Initializing cgroup subsys devices
[ 0.033306] Initializing cgroup subsys freezer
[ 0.033312] Initializing cgroup subsys net_cls
[ 0.033323] Initializing cgroup subsys blkio
[ 0.033332] Initializing cgroup subsys perf_event
[ 0.033336] Initializing cgroup subsys net_prio
[ 0.033377] tseg: 00bff80000
[ 0.033380] CPU: Physical Processor ID: 0
[ 0.033382] CPU: Processor Core ID: 0
[ 0.033385] mce: CPU supports 5 MCE banks
[ 0.033393] LVT offset 0 assigned for vector 0xf9
[ 0.033398] process: using AMD E400 aware idle routine
[ 0.033402] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.033523] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.036704] ftrace: allocating 21625 entries in 85 pages
[ 0.052555] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.133413] smpboot: CPU0: AMD Turion™ 64 X2 Mobile Technology TL-52 (fam: 0f, model:
48, stepping: 02)
[ 0.136000] Performance Events: AMD PMU driver.
[ 0.136000] … version: 0
[ 0.136000] … bit width: 48
[ 0.136000] … generic registers: 4
[ 0.136000] … value mask: 0000ffffffffffff
[ 0.136000] … max period: 00007fffffffffff
[ 0.136000] … fixed-purpose events: 0
[ 0.136000] … event mask: 000000000000000f
[ 0.136722] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.136959] x86: Booting SMP configuration:
[ 0.136962] … node #0, CPUs: #1
[ 0.236055] x86: Booted up 1 node, 2 CPUs
[ 0.236059] smpboot: Total of 2 processors activated (4810.01 BogoMIPS)
[ 0.236076] process: System has AMD C1E enabled
[ 0.236099] process: Switch to broadcast mode on CPU1
[ 0.236681] process: Switch to broadcast mode on CPU0
[ 0.236681] devtmpfs: initialized
[ 0.252036] PM: Registering ACPI NVS region [mem 0xbff6a000-0xbff7ffff] (90112 bytes)
[ 0.252816] pinctrl core: initialized pinctrl subsystem
[ 0.252967] NET: Registered protocol family 16
[ 0.253200] cpuidle: using governor ladder
[ 0.253205] cpuidle: using governor menu
[ 0.253215] TOM: 00000000c0000000 aka 3072M
[ 0.253220] node 0 link 0: mmio [a0000, bffff]
[ 0.253225] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.253228] node 0 link 0: mmio [e0000000, efffffff]
[ 0.253231] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.253235] bus: [bus 00-ff] on node 0 link 0
[ 0.253238] bus: 00 [io 0x0000-0xffff]
[ 0.253241] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.253244] bus: 00 [mem 0xc0000000-0xfcffffffff]
[ 0.253315] ACPI: bus type PCI registered
[ 0.253318] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.253465] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff]
(base 0xe0000000)
[ 0.253469] PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] reserved in E820
[ 0.253504] PCI: Using configuration type 1 for base access
[ 0.253763] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.253765] mtrr: probably your BIOS does not setup all CPUs.
[ 0.253766] mtrr: corrected configuration.
[ 0.276157] ACPI: Added _OSI(Module Device)
[ 0.276157] ACPI: Added _OSI(Processor Device)
[ 0.276157] ACPI: Added _OSI(3.0 SCP Extensions)
[ 0.276157] ACPI: Added OSI(Processor Aggregator Device)
[ 0.284645] ACPI: Interpreter enabled
[ 0.284654] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S1]
(20140424/hwxface-580)
[ 0.284661] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2]
(20140424/hwxface-580)
[ 0.284685] ACPI: (supports S0 S3 S4 S5)
[ 0.284688] ACPI: Using IOAPIC for interrupt routing
[ 0.284734] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report
a bug
[ 0.293368] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.300796] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.300806] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments
MSI]
[ 0.300816] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.300950] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff]
(conflicts with Video ROM [mem 0x000c0000-0x000ccfff])
[ 0.300959] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-06] only
partially covers this bridge
[ 0.301219] PCI host bridge to bus 0000:00
[ 0.301224] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.301228] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.301232] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.301235] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.301239] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.301243] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.301247] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.301251] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.301255] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.301259] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.301263] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.301267] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.301270] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.301274] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.301278] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.301281] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.301285] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.301298] pci 0000:00:00.0: [10de:02f7] type 00 class 0x050000
[ 0.301451] pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
[ 0.301588] pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
[ 0.301728] pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
[ 0.301867] pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
[ 0.304018] pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
[ 0.304170] pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
[ 0.304307] pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
[ 0.304452] pci 0000:00:02.0: [10de:02fc] type 01 class 0x060400
[ 0.304486] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.304637] pci 0000:00:03.0: [10de:02fd] type 01 class 0x060400
[ 0.304669] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.304818] pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
[ 0.304849] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305006] pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
[ 0.305236] pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
[ 0.305396] pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
[ 0.305424] pci 0000:00:0a.1: reg 0x20: [io 0x3040-0x307f]
[ 0.305432] pci 0000:00:0a.1: reg 0x24: [io 0x3000-0x303f]
[ 0.305458] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.305611] pci 0000:00:0a.3: [10de:0271] type 00 class 0x0b4000
[ 0.305626] pci 0000:00:0a.3: reg 0x10: [mem 0xc0040000-0xc007ffff]
[ 0.305816] pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
[ 0.305827] pci 0000:00:0b.0: reg 0x10: [mem 0xc0004000-0xc0004fff]
[ 0.305863] pci 0000:00:0b.0: supports D1 D2
[ 0.305866] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305931] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.308024] pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
[ 0.308037] pci 0000:00:0b.1: reg 0x10: [mem 0xc0005000-0xc00050ff]
[ 0.308074] pci 0000:00:0b.1: supports D1 D2
[ 0.308077] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308136] pci 0000:00:0b.1: System wakeup disabled by ACPI
[ 0.308231] pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
[ 0.308252] pci 0000:00:0d.0: reg 0x20: [io 0x3080-0x308f]
[ 0.308264] pci 0000:00:0d.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.308267] pci 0000:00:0d.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.308270] pci 0000:00:0d.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.308273] pci 0000:00:0d.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.308409] pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
[ 0.308421] pci 0000:00:0e.0: reg 0x10: [io 0x30b0-0x30b7]
[ 0.308428] pci 0000:00:0e.0: reg 0x14: [io 0x30a4-0x30a7]
[ 0.308435] pci 0000:00:0e.0: reg 0x18: [io 0x30a8-0x30af]
[ 0.308442] pci 0000:00:0e.0: reg 0x1c: [io 0x30a0-0x30a3]
[ 0.308449] pci 0000:00:0e.0: reg 0x20: [io 0x3090-0x309f]
[ 0.308456] pci 0000:00:0e.0: reg 0x24: [mem 0xc0006000-0xc0006fff]
[ 0.308612] pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
[ 0.308772] pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
[ 0.308785] pci 0000:00:10.1: reg 0x10: [mem 0xc0000000-0xc0003fff]
[ 0.308827] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.308890] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.308987] pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
[ 0.308998] pci 0000:00:14.0: reg 0x10: [mem 0xc0007000-0xc0007fff]
[ 0.309004] pci 0000:00:14.0: reg 0x14: [io 0x30b8-0x30bf]
[ 0.309034] pci 0000:00:14.0: supports D1 D2
[ 0.309038] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309186] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.309326] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.309459] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.309594] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.309834] acpiphp: Slot [1] registered
[ 0.309841] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.309847] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.309851] pci 0000:00:02.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.309858] pci 0000:00:02.0: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.309936] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.312031] pci 0000:05:00.0: [10de:0425] type 00 class 0x030000
[ 0.312044] pci 0000:05:00.0: reg 0x10: [mem 0xc1000000-0xc1ffffff]
[ 0.312056] pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.312067] pci 0000:05:00.0: reg 0x1c: [mem 0xc2000000-0xc3ffffff 64bit]
[ 0.312076] pci 0000:05:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.312085] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.320020] pci 0000:00:04.0: PCI bridge to [bus 05]
[ 0.320025] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff]
[ 0.320030] pci 0000:00:04.0: bridge window [mem 0xc1000000-0xc3ffffff]
[ 0.320035] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.320105] pci 0000:07:06.0: [1106:3044] type 00 class 0x0c0010
[ 0.320117] pci 0000:07:06.0: reg 0x10: [mem 0xc4000000-0xc40007ff]
[ 0.320125] pci 0000:07:06.0: reg 0x14: [io 0x6000-0x607f]
[ 0.320165] pci 0000:07:06.0: supports D2
[ 0.320169] pci 0000:07:06.0: PME# supported from D2 D3hot D3cold
[ 0.320281] pci 0000:00:10.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.320285] pci 0000:00:10.0: bridge window [io 0x6000-0x6fff]
[ 0.320290] pci 0000:00:10.0: bridge window [mem 0xc4000000-0xc40fffff]
[ 0.320296] pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.320299] pci 0000:00:10.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.320303] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive
decode)
[ 0.320307] pci 0000:00:10.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive
decode)
[ 0.320311] pci 0000:00:10.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive
decode)
[ 0.320315] pci 0000:00:10.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive
decode)
[ 0.320319] pci 0000:00:10.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive
decode)
[ 0.320323] pci 0000:00:10.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive
decode)
[ 0.320327] pci 0000:00:10.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive
decode)
[ 0.320331] pci 0000:00:10.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive
decode)
[ 0.320335] pci 0000:00:10.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive
decode)
[ 0.320339] pci 0000:00:10.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive
decode)
[ 0.320343] pci 0000:00:10.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive
decode)
[ 0.320347] pci 0000:00:10.0: bridge window [mem 0x000ec000-0x000effff] (subtractive
decode)
[ 0.320351] pci 0000:00:10.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive
decode)
[ 0.320356] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive
decode)
[ 0.320368] pci_bus 0000:00: on NUMA node 0
[ 0.321733] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.321875] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
[ 0.324026] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
[ 0.324164] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.324302] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
[ 0.324437] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.324573] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.324715] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
[ 0.324851] ACPI: PCI Interrupt Link [LSMB] (IRQs 20) *10
[ 0.324985] ACPI: PCI Interrupt Link [LPMU] (IRQs 21) *10
[ 0.325119] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
[ 0.325254] ACPI: PCI Interrupt Link [LUS2] (IRQs 23) *5
[ 0.325387] ACPI: PCI Interrupt Link [LMAC] (IRQs 17) *15
[ 0.325521] ACPI: PCI Interrupt Link [LAZA] (IRQs 19) *0, disabled.
[ 0.325656] ACPI: PCI Interrupt Link [LPID] (IRQs 20) *0, disabled.
[ 0.325797] ACPI: PCI Interrupt Link [LTID] (IRQs 20) *10
[ 0.325932] ACPI: PCI Interrupt Link [LSI1] (IRQs 16) *0, disabled.
[ 0.328096] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.328172] ACPI : EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 0.328347] vgaarb: setting as boot device: PCI:0000:05:00.0
[ 0.328347] vgaarb: device added:
PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.328347] vgaarb: loaded
[ 0.328347] vgaarb: bridge control possible 0000:05:00.0
[ 0.328347] PCI: Using ACPI for IRQ routing
[ 0.328347] PCI: pci_cache_line_size set to 64 bytes
[ 0.328347] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.328347] e820: reserve RAM buffer [mem 0xbff60000-0xbfffffff]
[ 0.328532] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.328539] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.328545] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.332051] Switched to clocksource hpet
[ 0.353086] pnp: PnP ACPI init
[ 0.353110] ACPI: bus type PNP registered
[ 0.353341] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.353346] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.353350] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.353355] system 00:00: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.353362] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.353471] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.353476] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.353791] system 00:02: [io 0x1000-0x107f] could not be reserved
[ 0.353796] system 00:02: [io 0x1080-0x10ff] has been reserved
[ 0.353800] system 00:02: [io 0x1400-0x147f] has been reserved
[ 0.353805] system 00:02: [io 0x1480-0x14ff] has been reserved
[ 0.353810] system 00:02: [io 0x1800-0x187f] has been reserved
[ 0.353814] system 00:02: [io 0x1880-0x18ff] has been reserved
[ 0.353820] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.353887] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.353951] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.356058] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.356508] system 00:06: [io 0x0360-0x0361] has been reserved
[ 0.356514] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.356519] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357016] pnp: PnP ACPI: found 7 devices
[ 0.357019] ACPI: bus type PNP unregistered
[ 0.376286] pci 0000:00:03.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.376294] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
03] add_size 200000
[ 0.376299] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size
200000
[ 0.376326] pci 0000:00:03.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size
200000
[ 0.376331] pci 0000:00:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size
add_size 200000
[ 0.376335] pci 0000:00:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.376349] pci 0000:00:03.0: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
[ 0.376368] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.376375] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.376381] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.376386] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.376391] pci 0000:00:02.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.376396] pci 0000:00:02.0: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.376400] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.376404] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.376409] pci 0000:00:03.0: bridge window [mem 0xc0400000-0xc05fffff]
[ 0.376413] pci 0000:00:03.0: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.376421] pci 0000:05:00.0: BAR 6: can’t assign mem pref (size 0x20000)
[ 0.376425] pci 0000:00:04.0: PCI bridge to [bus 05]
[ 0.376429] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff]
[ 0.376433] pci 0000:00:04.0: bridge window [mem 0xc1000000-0xc3ffffff]
[ 0.376438] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.376443] pci 0000:00:10.0: PCI bridge to [bus 07]
[ 0.376447] pci 0000:00:10.0: bridge window [io 0x6000-0x6fff]
[ 0.376452] pci 0000:00:10.0: bridge window [mem 0xc4000000-0xc40fffff]
[ 0.376459] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.376463] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.376466] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.376470] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.376473] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.376477] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.376480] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.376484] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.376488] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.376491] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.376495] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.376499] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.376503] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.376506] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.376510] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.376513] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.376518] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.376522] pci_bus 0000:01: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.376525] pci_bus 0000:01: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.376530] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.376534] pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc05fffff]
[ 0.376537] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.376542] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.376545] pci_bus 0000:05: resource 1 [mem 0xc1000000-0xc3ffffff]
[ 0.376549] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.376554] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.376558] pci_bus 0000:07: resource 1 [mem 0xc4000000-0xc40fffff]
[ 0.376561] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.376565] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.376569] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.376572] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.376576] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.376580] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.376583] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.376587] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.376591] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.376594] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.376598] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.376602] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.376605] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.376609] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
[ 0.376613] pci_bus 0000:07: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.376616] pci_bus 0000:07: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.376688] NET: Registered protocol family 2
[ 0.377059] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.377314] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.377667] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.377778] TCP: reno registered
[ 0.377791] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.377860] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.380061] NET: Registered protocol family 1
[ 0.380098] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.380104] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.380150] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.380173] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.380199] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.380548] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.640408] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 0.640508] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.640552] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.640597] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.640630] pci 0000:05:00.0: Video device with shadowed ROM
[ 0.640636] PCI: CLS 64 bytes, default 64
[ 0.640726] Unpacking initramfs…
[ 1.637485] Freeing initrd memory: 14580K (ffff880036376000 - ffff8800371b3000)
[ 1.637946] Simple Boot Flag at 0x36 set to 0x1
[ 1.640122] microcode: AMD CPU family 0xf not supported
[ 1.640996] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.641062] audit: initializing netlink subsys (disabled)
[ 1.641098] audit: type=2000 audit(1447500001.640:1): initialized
[ 1.642587] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.642623] zbud: loaded
[ 1.643146] VFS: Disk quotas dquot_6.5.2
[ 1.643172] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.643268] msgmni has been set to 6034
[ 1.644938] alg: No test for stdrng (krng)
[ 1.644998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.645168] io scheduler noop registered
[ 1.645172] io scheduler deadline registered
[ 1.645235] io scheduler cfq registered (default)
[ 1.645394] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.645476] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[ 1.645614] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[ 1.645727] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.645758] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.645859] GHES: HEST is not enabled!
[ 1.646838] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.648489] Linux agpgart interface v0.103
[ 1.648668] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq
1,12
[ 1.657228] i8042: Detected active multiplexing controller, rev 1.1
[ 1.662181] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.662192] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.662246] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.662291] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.662335] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.663847] mousedev: PS/2 mouse device common for all mice
[ 1.664037] rtc_cmos 00:05: RTC can wake from S4
[ 1.664346] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.664378] rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.664400] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.664725] AMD IOMMUv2 driver by Joerg Roedel joerg.roedel@amd.com
[ 1.664727] AMD IOMMUv2 functionality not available on this system
[ 1.664890] TCP: cubic registered
[ 1.664952] NET: Registered protocol family 10
[ 1.666240] mip6: Mobile IPv6
[ 1.666248] NET: Registered protocol family 17
[ 1.666259] mpls_gso: MPLS GSO support
[ 1.667506] registered taskstats version 1
[ 1.668679] rtc_cmos 00:05: setting system clock to 2015-11-14 11:20:02 UTC (1447500002)
[ 1.668779] PM: Hibernation image not present or could not be loaded.
[ 1.672535] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 1.672541] Write protecting the kernel read-only data: 8192k
[ 1.680757] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 1.681724] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 1.697046] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.727481] systemd-udevd[60]: starting version 215
[ 1.728475] random: systemd-udevd urandom read with 8 bits of entropy available
[ 1.801809] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.801815] ACPI: Thermal Zone [THRM] (28 C)
[ 1.817841] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.828763] ACPI: bus type USB registered
[ 1.828813] usbcore: registered new interface driver usbfs
[ 1.828831] usbcore: registered new interface driver hub
[ 1.829040] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
[ 1.829802] SCSI subsystem initialized
[ 1.837827] usbcore: registered new device driver usb
[ 1.840749] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.841008] ehci-pci: EHCI PCI platform driver
[ 1.841599] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 1.841792] libata version 3.00 loaded.
[ 1.845072] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 1.908083] firewire_ohci 0000:07:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT
contexts, quirks 0x11
[ 2.352641] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:14:0b:43:bd:23
[ 2.352647] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 2.353339] ehci-pci 0000:00:0b.1: EHCI Host Controller
[ 2.353339] ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 2.353339] ehci-pci 0000:00:0b.1: debug port 1
[ 2.353339] ehci-pci 0000:00:0b.1: cache line size of 64 is not supported
[ 2.353339] ehci-pci 0000:00:0b.1: irq 23, io mem 0xc0005000
[ 2.364092] ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 2.364456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.364463] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.364468] usb usb1: Product: EHCI Host Controller
[ 2.364471] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.364475] usb usb1: SerialNumber: 0000:00:0b.1
[ 2.364862] hub 1-0:1.0: USB hub found
[ 2.364875] hub 1-0:1.0: 8 ports detected
[ 2.365985] sata_nv 0000:00:0e.0: version 3.5
[ 2.365993] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[ 2.366260] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
[ 2.366282] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.368296] ohci-pci: OHCI PCI platform driver
[ 2.368682] scsi0 : sata_nv
[ 2.370319] scsi1 : sata_nv
[ 2.370319] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 20
[ 2.370319] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 20
[ 2.370634] pata_amd 0000:00:0d.0: version 0.4.1
[ 2.373151] scsi2 : pata_amd
[ 2.373527] scsi3 : pata_amd
[ 2.373641] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 2.373641] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 2.373756] ohci-pci 0000:00:0b.0: OHCI PCI host controller
[ 2.373768] ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 2.373823] ohci-pci 0000:00:0b.0: irq 22, io mem 0xc0004000
[ 2.408475] firewire_core 0000:07:06.0: created device fw0: GUID 0040ca014e02d40c, S400
[ 2.432203] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.432208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.432212] usb usb2: Product: OHCI PCI host controller
[ 2.432215] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 2.432219] usb usb2: SerialNumber: 0000:00:0b.0
[ 2.432637] hub 2-0:1.0: USB hub found
[ 2.432637] hub 2-0:1.0: 8 ports detected
[ 2.536151] ata3.00: NODEV after polling detection
[ 2.676109] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 2.808416] usb 1-3: New USB device found, idVendor=0bf8, idProduct=100f
[ 2.808420] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.836064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.890916] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 2.890921] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.905327] ata1.00: configured for UDMA/133
[ 2.905753] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 1A01 PQ: 0 ANSI: 5
[ 3.168072] usb 2-5: new low-speed USB device number 2 using ohci-pci
[ 3.216081] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.378042] usb 2-5: New USB device found, idVendor=04f3, idProduct=0234
[ 3.378049] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.378053] usb 2-5: Product: OM
[ 3.384597] hidraw: raw HID events driver © Jiri Kosina
[ 3.392528] usbcore: registered new interface driver usbhid
[ 3.392533] usbhid: USB HID core driver
[ 3.394736] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.396112] sd 0:0:0:0: [sda] Write Protect is off
[ 3.396116] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.396149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or
FUA
[ 3.396543] input: OM as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-
5:1.0/0003:04F3:0234.0001/input/input5
[ 3.396668] hid-generic 0003:04F3:0234.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on
usb-0000:00:0b.0-5/input0
[ 3.473175] sda: sda1 sda2 < sda5 >
[ 3.474578] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.476255] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.852079] PM: Starting manual resume from disk
[ 3.852089] PM: Hibernation image partition 8:5 present
[ 3.852092] PM: Looking for hibernation image.
[ 3.852619] PM: Image not found (code -22)
[ 3.852622] PM: Hibernation image not present or could not be loaded.
[ 4.076822] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.886361] random: nonblocking pool is initialized
[ 7.807795] lp: driver loaded but no devices found
[ 7.920727] ppdev: user-space parallel port driver
[ 8.056293] fuse init (API version 7.23)
[ 8.417678] systemd-udevd[168]: starting version 215
[ 10.098410] ACPI: processor limited to max C-state 1
[ 10.249471] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 10.249481] ACPI: Power Button [PWRB]
[ 10.249563] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 10.249567] ACPI: Sleep Button [SLPB]
[ 10.249670] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input8
[ 10.249711] ACPI: Lid Switch [LID]
[ 10.249782] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
[ 10.249785] ACPI: Power Button [PWRF]
[ 10.324632] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.353299] ACPI: AC Adapter [ACAD] (on-line)
[ 10.353926] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 10.353973] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.356296] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 10.385478] acpi device:17: registered as cooling_device2
[ 10.385577] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input10
[ 10.413143] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 10.413186] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 10.420046] ACPI: Battery Slot [BAT0] (battery present)
[ 10.625784] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 10.625788] nv_tco: Watchdog reboot not detected
[ 10.626380] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 10.676490] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.713144] [drm] Initialized drm 1.1.0 20060810
[ 10.861249] EDAC MC: Ver: 3.0.0
[ 10.917894] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 10.986970] MCE: In-kernel MCE decoding enabled.
[ 11.206778] AMD64 EDAC driver v3.4.0
[ 11.206825] EDAC amd64: DRAM ECC disabled.
[ 11.206833] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not
load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 11.242108] wmi: Mapper loaded
[ 11.357971] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.842783] systemd-journald[156]: Received request to flush runtime journal from PID 1
[ 12.049546] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
[ 12.049546] snd_hda_intel 0000:00:10.1: Disabling MSI
[ 12.054295] kvm: disabled by bios
[ 12.065119] kvm: disabled by bios
[ 12.086605] powernow_k8: fid 0x8 (1600 MHz), vid 0x12
[ 12.086605] powernow_k8: fid 0x0 (800 MHz), vid 0x1e
[ 12.089695] powernow_k8: Found 1 AMD Turion™ 64 X2 Mobile Technology TL-52 (2 cpu
cores) (version 2.20.00)
[ 12.213709] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[ 12.215317] nouveau [ DEVICE][0000:05:00.0] BOOT0 : 0x086500a2
[ 12.215322] nouveau [ DEVICE][0000:05:00.0] Chipset: G86 (NV86)
[ 12.215325] nouveau [ DEVICE][0000:05:00.0] Family : NV50
[ 12.215390] nouveau [ VBIOS][0000:05:00.0] checking PRAMIN for image…
[ 12.269606] input: ALPS PS/2 Device as /devices/platform/i8042/serio4/input/input16
[ 12.281638] nouveau [ VBIOS][0000:05:00.0] … appears to be valid
[ 12.281642] nouveau [ VBIOS][0000:05:00.0] using image from PRAMIN
[ 12.281889] nouveau [ VBIOS][0000:05:00.0] BIT signature found
[ 12.281894] nouveau [ VBIOS][0000:05:00.0] version 60.86.4c.00.15
[ 12.294629] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input15
[ 12.324227] nouveau 0000:05:00.0: irq 43 for MSI/MSI-X
[ 12.324239] nouveau [ PMC][0000:05:00.0] MSI interrupts enabled
[ 12.324264] nouveau [ PFB][0000:05:00.0] RAM type: DDR2
[ 12.324266] nouveau [ PFB][0000:05:00.0] RAM size: 256 MiB
[ 12.324268] nouveau [ PFB][0000:05:00.0] ZCOMP: 1292 tags
[ 12.324943] nouveau [ VOLT][0000:05:00.0] GPU voltage: 1150000uv
[ 12.380241] nouveau [ PTHERM][0000:05:00.0] FAN control: none / external
[ 12.380251] nouveau [ PTHERM][0000:05:00.0] fan management: automatic
[ 12.380253] nouveau [ PTHERM][0000:05:00.0] internal sensor: yes
[ 12.380269] nouveau [ CLK][0000:05:00.0] 20: core 169 MHz shader 338 MHz memory 100
MHz
[ 12.380272] nouveau [ CLK][0000:05:00.0] 21: core 275 MHz shader 550 MHz memory 200
MHz
[ 12.380275] nouveau [ CLK][0000:05:00.0] 22: core 500 MHz shader 1000 MHz memory 400
MHz
[ 12.380294] nouveau [ CLK][0000:05:00.0] --: core 275 MHz shader 550 MHz memory 199
MHz
[ 12.380831] [TTM] Zone kernel: Available graphics memory: 1546116 kiB
[ 12.380834] [TTM] Initializing pool allocator
[ 12.380838] [TTM] Initializing DMA pool allocator
[ 12.380849] nouveau [ DRM] VRAM: 256 MiB
[ 12.380851] nouveau [ DRM] GART: 1048576 MiB
[ 12.380854] nouveau [ DRM] TMDS table version 2.0
[ 12.380856] nouveau [ DRM] DCB version 4.0
[ 12.380858] nouveau [ DRM] DCB outp 00: 01010323 00000034
[ 12.380860] nouveau [ DRM] DCB outp 01: 02001300 00000028
[ 12.380861] nouveau [ DRM] DCB outp 02: 02002302 00000010
[ 12.380863] nouveau [ DRM] DCB outp 03: 010233f1 0000c070
[ 12.380864] nouveau [ DRM] DCB conn 00: 0040
[ 12.380866] nouveau [ DRM] DCB conn 01: 0100
[ 12.380868] nouveau [ DRM] DCB conn 02: 1230
[ 12.380869] nouveau [ DRM] DCB conn 03: 0311
[ 12.388290] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 12.388293] nouveau W[ DRM] TV-1 has no encoders, removing
[ 12.388313] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.388314] [drm] Driver supports precise vblank timestamp query.
[ 12.393979] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 13.002056] Adding 6288380k swap on /dev/sda5. Priority:-1 extents:1 across:6288380k FS
[ 13.084037] sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[ 13.084041] sound hdaudioC0D0: speaker_outs=2 (0x14/0x16/0x0/0x0/0x0)
[ 13.084043] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.084045] sound hdaudioC0D0: mono: mono_out=0x0
[ 13.084047] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 13.084048] sound hdaudioC0D0: inputs:
[ 13.084050] sound hdaudioC0D0: Internal Mic=0x19
[ 13.084051] sound hdaudioC0D0: Mic=0x18
[ 13.084053] sound hdaudioC0D0: Line=0x1a
[ 13.481573] nouveau [ DRM] allocated 1440x900 fb: 0x60000, bo ffff880036884400
[ 13.483600] fbcon: nouveaufb (fb0) is primary device
[ 13.585171] Console: switching to colour frame buffer device 180x56
[ 13.588099] nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device
[ 13.588101] nouveau 0000:05:00.0: registered panic notifier
[ 13.600064] [drm] Initialized nouveau 1.1.2 20120801 for 0000:05:00.0 on minor 0
[ 13.804081] sound hdaudioC0D1: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 13.804090] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.804095] sound hdaudioC0D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.804099] sound hdaudioC0D1: mono: mono_out=0x0
[ 13.804102] sound hdaudioC0D1: inputs:
[ 14.576710] RPC: Registered named UNIX socket transport module.
[ 14.576717] RPC: Registered udp transport module.
[ 14.576719] RPC: Registered tcp transport module.
[ 14.576721] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.656158] FS-Cache: Loaded
[ 14.720531] FS-Cache: Netfs ‘nfs’ registered for caching
[ 14.807880] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 14.981640] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:10.1/sound/card0/hdaudioC0D0/input17
[ 14.988655] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input18
[ 14.989056] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input19
[ 14.989269] input: HDA NVidia Line Out as
/devices/pci0000:00/0000:00:10.1/sound/card0/input20
[ 21.724296] cfg80211: Calling CRDA to update world regulatory domain
[ 22.957229] cfg80211: World regulatory domain updated:
[ 22.957237] cfg80211: DFS Master region: unset
[ 22.957240] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
[ 22.957244] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm),
(N/A)
[ 22.957248] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm),
(N/A)
[ 22.957251] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm),
(N/A)
[ 22.957255] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO),
(N/A, 2000 mBm), (N/A)
[ 22.957260] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO),
(N/A, 2000 mBm), (0 s)
[ 22.957263] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0
s)
[ 22.957266] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm),
(N/A)
[ 22.957270] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm),
(N/A)
[ 30.615946] [sched_delayed] #4CE: hpet increased min_delta_ns to 11521 nsec
[ 461.344088] usb 1-2: new high-speed USB device number 4 using ehci-pci
[ 461.478787] usb 1-2: New USB device found, idVendor=0951, idProduct=1605
[ 461.478794] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 461.478798] usb 1-2: Product: DataTravelerMini
[ 461.478802] usb 1-2: Manufacturer: Kingston
[ 461.478806] usb 1-2: SerialNumber: 1262007110206163300000BA
[ 461.812530] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 461.820179] scsi4 : usb-storage 1-2:1.0
[ 461.820489] usbcore: registered new interface driver usb-storage
[ 462.822335] scsi 4:0:0:0: Direct-Access Kingston DataTravelerMini 1.00 PQ: 0 ANSI: 2
[ 462.823781] sd 4:0:0:0: [sdb] 8081408 512-byte logical blocks: (4.13 GB/3.85 GiB)
[ 462.825140] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 462.829830] sd 4:0:0:0: [sdb] Write Protect is off
[ 462.829838] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 462.832619] sd 4:0:0:0: [sdb] No Caching mode page found
[ 462.832625] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 462.920838] sdb: sdb1
[ 462.927198] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 463.431218] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem
will be case sensitive!
[ 2002.080109] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 2002.214395] usb 1-4: New USB device found, idVendor=058f, idProduct=6366
[ 2002.214402] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2002.214407] usb 1-4: Product: Mass Storage Device
[ 2002.214410] usb 1-4: Manufacturer: Generic
[ 2002.214414] usb 1-4: SerialNumber: 058F0O1111B1
[ 2002.215067] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 2002.216610] scsi5 : usb-storage 1-4:1.0
[ 2003.218340] scsi 5:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 2003.218982] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2003.812320] sd 5:0:0:0: [sdc] 7811072 512-byte logical blocks: (3.99 GB/3.72 GiB)
[ 2003.814179] sd 5:0:0:0: [sdc] Write Protect is off
[ 2003.814184] sd 5:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 2003.816345] sd 5:0:0:0: [sdc] No Caching mode page found
[ 2003.816350] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2003.826072] sdc: sdc1
[ 2003.836191] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 2004.088242] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem
will be case sensitive!
[ 2644.634695] usb 1-4: USB disconnect, device number 5
[ 2720.900110] usb 1-1: new high-speed USB device number 6 using ehci-pci
[ 2721.037892] usb 1-1: New USB device found, idVendor=04a9, idProduct=3259
[ 2721.037899] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2721.037904] usb 1-1: Product: Canon Digital Camera
[ 2721.037907] usb 1-1: Manufacturer: Canon Inc.
[ 2721.037911] usb 1-1: SerialNumber: 9F09749C68A8421E90D0AEE6D5AF86FD
[ 2728.771702] usb 1-1: USB disconnect, device number 6
[ 2734.280094] usb 1-1: new high-speed USB device number 7 using ehci-pci
[ 2734.413896] usb 1-1: New USB device found, idVendor=04a9, idProduct=3259
[ 2734.413904] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2734.413908] usb 1-1: Product: Canon Digital Camera
[ 2734.413911] usb 1-1: Manufacturer: Canon Inc.
[ 2734.413916] usb 1-1: SerialNumber: 9F09749C68A8421E90D0AEE6D5AF86FD
[ 4649.812444] usb 1-1: USB disconnect, device number 7
[ 4688.084447] usb 1-2: USB disconnect, device number 4
joel@debian:~$[/quote]
[quote]joel@debian:~$ lspci -nnk
00:00.0 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02f7] (rev a2)
00:00.1 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 0 [10de:02fa] (rev
a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:00.2 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 1 [10de:02fe] (rev
a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:00.3 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 5 [10de:02f8] (rev
a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:00.4 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 4 [10de:02f9] (rev
a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:00.5 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:00.6 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 3 [10de:027f] (rev
a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:00.7 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 2 [10de:027e] (rev
a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:02.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fc] (rev a1)
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fd] (rev a1)
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fb] (rev a1)
Kernel driver in use: pcieport
00:09.0 RAM memory [0500]: NVIDIA Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:0a.0 ISA bridge [0601]: NVIDIA Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
Subsystem: NVIDIA Corporation Device [10de:cb84]
00:0a.1 SMBus [0c05]: NVIDIA Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: nForce2_smbus
00:0a.3 Co-processor [0b40]: NVIDIA Corporation MCP51 PMU [10de:0271] (rev a3)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
00:0b.0 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller [10de:026d] (rev a3)
Subsystem: NVIDIA Corporation Device [10de:cb84]
Kernel driver in use: ohci-pci
00:0b.1 USB controller [0c03]: NVIDIA Corporation MCP51 USB Controller [10de:026e] (rev a3)
Subsystem: NVIDIA Corporation Device [10de:cb84]
Kernel driver in use: ehci-pci
00:0d.0 IDE interface [0101]: NVIDIA Corporation MCP51 IDE [10de:0265] (rev f1)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: pata_amd
00:0e.0 IDE interface [0101]: NVIDIA Corporation MCP51 Serial ATA Controller [10de:0266] (rev
f1)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: sata_nv
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP51 PCI Bridge [10de:026f] (rev a2)
00:10.1 Audio device [0403]: NVIDIA Corporation MCP51 High Definition Audio [10de:026c]
(rev a2)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: snd_hda_intel
00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: forcedeth
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address
Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM
Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Kernel driver in use: k8temp
05:00.0 VGA compatible controller [0300]: NVIDIA Corporation G86M [GeForce 8600M GS]
[10de:0425] (rev a1)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: nouveau
07:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394
OHCI Controller [1106:3044] (rev c0)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: firewire_ohci[/quote]
Euh, non. Pour du code, des logs, des sorties de commandes, il faut utiliser la balise “code”. C’est beaucoup plus lisible.
A la limite, des pièce jointes en texte brut mais pas en PDF, ODT ou autre format nécessitant un lecteur spécifique.
J’ai extrait les lignes intéressantes.
00:0d.0 IDE interface [0101]: NVIDIA Corporation MCP51 IDE [10de:0265] (rev f1)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: pata_amd
Contrôleur PATA/IDE Nvidia utilisant le module [mono]pata_amd[/mono]. Normal.
00:0e.0 IDE interface [0101]: NVIDIA Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1)
Subsystem: Fujitsu Technology Solutions Device [1734:110c]
Kernel driver in use: sata_nv
Contrôleur SATA Nvidia utilisant le module [mono]sata_nv[/mono]. Normal.
Contrôleur SATA :
[ 2.365985] sata_nv 0000:00:0e.0: version 3.5
[ 2.365993] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[ 2.366260] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
[ 2.366282] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.368682] scsi0 : sata_nv
[ 2.370319] scsi1 : sata_nv
[ 2.370319] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 20
[ 2.370319] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 20
[ 2.836064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.890916] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 2.890921] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.905327] ata1.00: configured for UDMA/133
[ 3.216081] ata2: SATA link down (SStatus 0 SControl 300)
Un disque dur SATA Western Digital est connecté en “[mono]ata1[/mono]”.
Rien n’est connecté en “[mono]ata2[/mono]”.
Contrôleur PATA :
[ 2.370634] pata_amd 0000:00:0d.0: version 0.4.1
[ 2.373151] scsi2 : pata_amd
[ 2.373527] scsi3 : pata_amd
[ 2.373641] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 2.373641] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 2.536151] ata3.00: NODEV after polling detection
Je ne sais pas comment interpréter “[mono]NODEV[/mono]” (no device ?) en “[mono]ata3[/mono]”, ni l’absence de ligne indiquant ce qui est détecté en “[mono]ata4[/mono]”, mais le lecteur DVD n’est pas détecté.
J’ai parcouru les liens cités plus haut, mais je ne suis pas sûr d’avoir compris en quoi consiste la modification du noyau qui a permis de reconnaître le lecteur DVD. La seule différence significative que je remarque est la désactivation du pilote [mono]pata_amd[/mono] :
Dans ce cas, si je comprends bien, c’est le pilote générique [mono]ata_generic[/mono] qui devrait prendre le relais. Ça ne coûte rien de tester.
modprobe -r pata_amd
modprobe ata_generic all_generic_ide=1
dmesg | tail -n 40
La première commande décharge le module [mono]pata_amd[/mono].
La seconde charge le module [mono]ata_generic[/mono] avec un paramètre lui disant de prendre en charge tous les contrôleurs IDE.
La troisième affiche les 40 derniers messages du noyau, cela devrai être suffisant pour voir si le lecteur DVD est détecté.
[quote modprobe -r pata_amd
modprobe ata_generic all_generic_ide=1
[/quote]
J’ai appliqué les commandes, mais malheusement le lecteur DVD n’est pas reconnu.
Même après avoir redémarrer Debian.
Voila ce que donne dmesg:
[quote][ 2.409143] pata_amd 0000:00:0d.0: version 0.4.1
[ 2.411726] scsi0 : pata_amd
[ 2.412181] scsi1 : pata_amd
[ 2.412304] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 2.412304] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 2.412371] sata_nv 0000:00:0e.0: version 3.5
[ 2.412371] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[ 2.412485] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
[ 2.412512] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.414962] scsi2 : sata_nv
[ 2.415306] scsi3 : sata_nv
[ 2.415420] ata3: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 20
[ 2.415420] ata4: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 20
[ 2.576150] ata1.00: NODEV after polling detection[/quote]
Il y a quelques changements dans les lignes me semble t-il.
Je doute que ceci soit le résultat de la commande [mono]dmesg[/mono] immédiatement après l’exécution des deux commandes [mono]modprobe[/mono]. Il ne faut pas redémarrer, ces actions ne sont pas persistantes.
Bonsoir,
Je vous remercie, vous avez fait votre possible pour m’aider.
Je pense que certaines machines, la mienne en l’occurrence, ne sont pas entièrement compatibles.
Je suis particulièrement furieux de ces choix de constructeur, de nous vendre de machines et d’en prévoir l’obsolescence dès sa conception.
Je suis satisfait de l’installation que j’ai effectué avec Debian.
Je vais donc chercher à l’améliorer. La seule chose qui ne fonctionne pas c’est ce lecteur. Tous ce dont j’ai besoin fonctionne.
Certains choix d’installation que j’avais fait, me posait aussi question, j’ai donc tout réinstaller. Mais rien n’a changé.
Je serais toujours preneur des propositions que vous me ferez.
Cordialement,
J’aurais quand même aimé voir les logs juste après les deux commandes modprobe.
Ah je suis désolé, j’ai repartitionné et reformaté le disque.
Finalement plusieurs choses ne fonctionne pas sur cette machine avec Debian:
Le lecteur de CDrom, la caméra, le micro, le wifi etc…
Je pense que l’installation de Debian (que j’ai faites 2 fois avec des critères différents) n’était pas complète. L’identification des éléments matériels me paraissait perturbé l’installation de debian.
Beaucoup d’élément Nvidia dedans,explique peut-être cela (sur la carte mère, les parties qui gère le wifi, le réseau, la vidéo, le DD, le CDrom etc…)
Bizarrement, les CD de vista qui se lance avec un programme nommé “Recovery” de la marque fonctionne. Je serais curieux de savoir si un CD complet de windows va jusqu’au bout de l’installation.
Mais comme je suis à la retraite, je n’ai plus les moyens financiers de jouer avec microsoft.
Ce problème de non reconnaissance du lecteur de CDrom, dès que l’installation recherche le matériel, je l’ai aussi avec d’autres distributions de Linux, Ubuntu, Linux mint, Tails. Sur cette machine, même l’ installation en mode live (quelque soit la distribution) ne fonctionnait pas.
Cela me conforte que la marque ai mis une saloperie dans cette machine.
Comme je n’en ai pas les moyens, je vais probablement essayer de la refaire fonctionner avec vista, car j’ai besoin de cette machine, car je fait l’administration d’un site et d’un forum pour une Assos. Quand je suis en déplacement, j’en ai besoin.
Si je n’arrive pas a avoir un portable utilisable, je rechercherais du matériel d’occasion, qui fonctionne avec Débian.
Inutile d’acheter du nouveau matériel compatible, peut-être que 95% de ton matériel actuel est supporté.
En gros tu dois juste installer et configurer cas par cas et tu te retrouveras avec un truc fonctionnel, normalement.
Bon, merci de votre encouragement.
J’ai refait une installation, car celle ci me paraissait pas très bonne.
Voici donc ci-dessous le fichier complet:
modprobe -r pata_amd
modprobe ata_generic all_generic_ide=1
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=b180083d-445e-4349-85a1-57f7def67445 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ce000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff60000-0x00000000bff69fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bff6a000-0x00000000bff7ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: FUJITSU SIEMENS AMILO Xa 2528/XTB71___, BIOS 1.0S-4C15-000\xffffffb8 11/12/08
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0xbff60 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f79d0-0x000f79df] mapped at [ffff8800000f79d0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[ 0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbfc00000-0xbfdfffff]
[ 0.000000] [mem 0xbfc00000-0xbfdfffff] page 2M
[ 0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc000000-0xbfbfffff]
[ 0.000000] [mem 0xbc000000-0xbfbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xbbffffff]
[ 0.000000] [mem 0x80000000-0xbbffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0xbfe00000-0xbff5ffff]
[ 0.000000] [mem 0xbfe00000-0xbff5ffff] page 4k
[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35582000-0x36ab8fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F7A10 000014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 0x00000000BFF64F52 000040 (v01 FSC PC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFF69B9A 000074 (v01 NVIDIA MCP51M 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 0x00000000BFF64F92 004C08 (v01 FIC XTB71___ 06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0x00000000BFF6AFC0 000040
[ 0.000000] ACPI: SLIC 0x00000000BFF69C0E 000176 (v01 FSC PC 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SSDT 0x00000000BFF69D84 000182 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 0x00000000BFF69F06 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFF69F42 000038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 0x00000000BFF69F7A 00005E (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000BFF69FD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bff5ffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xbff5ffff]
[ 0.000000] NODE_DATA [mem 0xbff5b000-0xbff5ffff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc400000-ffff8800bedfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbff5ffff]
[ 0.000000] On node 0 totalpages: 786172
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10694 pages used for memmap
[ 0.000000] DMA32 zone: 782176 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ce000-0x000fffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfa00000 s80896 r8192 d21504 u1048576
[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u1048576 alloc=12097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775401
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=b180083d-445e-4349-85a1-57f7def67445 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture…
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x9ad0000000-0x9ad1ffffff] (32MB)
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 3068144K/3144688K available (5209K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 76544K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1603.280 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.004019] Calibrating delay loop (skipped), value calculated using timer frequency… 3206.56 BogoMIPS (lpj=6413120)
[ 0.004023] pid_max: default: 32768 minimum: 301
[ 0.004041] ACPI: Core revision 20140424
[ 0.014561] ACPI: All ACPI Tables successfully acquired
[ 0.016071] Security Framework initialized
[ 0.016085] AppArmor: AppArmor disabled by boot time parameter
[ 0.016087] Yama: disabled by default; enable with sysctl kernel.yama.
[ 0.016711] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.028810] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.032576] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.032589] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.033108] Initializing cgroup subsys memory
[ 0.033118] Initializing cgroup subsys devices
[ 0.033133] Initializing cgroup subsys freezer
[ 0.033138] Initializing cgroup subsys net_cls
[ 0.033149] Initializing cgroup subsys blkio
[ 0.033157] Initializing cgroup subsys perf_event
[ 0.033161] Initializing cgroup subsys net_prio
[ 0.033202] tseg: 00bff80000
[ 0.033205] CPU: Physical Processor ID: 0
[ 0.033207] CPU: Processor Core ID: 0
[ 0.033209] mce: CPU supports 5 MCE banks
[ 0.033217] LVT offset 0 assigned for vector 0xf9
[ 0.033222] process: using AMD E400 aware idle routine
[ 0.033227] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
tlb_flushall_shift: 6
[ 0.033348] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.036529] ftrace: allocating 21623 entries in 85 pages
[ 0.052557] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.133236] smpboot: CPU0: AMD Turion™ 64 X2 Mobile Technology TL-52 (fam: 0f, model: 48, stepping: 02)
[ 0.136000] Performance Events: AMD PMU driver.
[ 0.136000] … version: 0
[ 0.136000] … bit width: 48
[ 0.136000] … generic registers: 4
[ 0.136000] … value mask: 0000ffffffffffff
[ 0.136000] … max period: 00007fffffffffff
[ 0.136000] … fixed-purpose events: 0
[ 0.136000] … event mask: 000000000000000f
[ 0.136868] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.137109] x86: Booting SMP configuration:
[ 0.137112] … node #0, CPUs: #1
[ 0.008000] process: System has AMD C1E enabled
[ 0.008000] process: Switch to broadcast mode on CPU1
[ 0.240087] x86: Booted up 1 node, 2 CPUs
[ 0.240091] smpboot: Total of 2 processors activated (4809.91 BogoMIPS)
[ 0.240707] process: Switch to broadcast mode on CPU0
[ 0.240707] devtmpfs: initialized
[ 0.256036] PM: Registering ACPI NVS region [mem 0xbff6a000-0xbff7ffff] (90112 bytes)
[ 0.256884] pinctrl core: initialized pinctrl subsystem
[ 0.257038] NET: Registered protocol family 16
[ 0.257270] cpuidle: using governor ladder
[ 0.257275] cpuidle: using governor menu
[ 0.257286] TOM: 00000000c0000000 aka 3072M
[ 0.257291] node 0 link 0: mmio [a0000, bffff]
[ 0.257295] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.257299] node 0 link 0: mmio [e0000000, efffffff]
[ 0.257302] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.257306] bus: [bus 00-ff] on node 0 link 0
[ 0.257309] bus: 00 [io 0x0000-0xffff]
[ 0.257311] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.257314] bus: 00 [mem 0xc0000000-0xfcffffffff]
[ 0.257383] ACPI: bus type PCI registered
[ 0.257387] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.257534] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
[ 0.257538] PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] reserved in E820
[ 0.257574] PCI: Using configuration type 1 for base access
[ 0.257827] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.257829] mtrr: probably your BIOS does not setup all CPUs.
[ 0.257830] mtrr: corrected configuration.
[ 0.280158] ACPI: Added _OSI(Module Device)
[ 0.280158] ACPI: Added _OSI(Processor Device)
[ 0.280158] ACPI: Added _OSI(3.0 SCP Extensions)
[ 0.280158] ACPI: Added OSI(Processor Aggregator Device)
[ 0.288793] ACPI: Interpreter enabled
[ 0.288802] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S1] (20140424/hwxface-580)
[ 0.288809] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2] (20140424/hwxface-580)
[ 0.288832] ACPI: (supports S0 S3 S4 S5)
[ 0.288835] ACPI: Using IOAPIC for interrupt routing
[ 0.288880] PCI: Using host bridge windows from ACPI; if necessary, use “pci=nocrs” and report a bug
[ 0.297323] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.304450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.304460] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.304470] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.304602] acpi PNP0A03:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ccfff])
[ 0.304611] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-06] only partially covers this bridge
[ 0.304845] PCI host bridge to bus 0000:00
[ 0.304850] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.304854] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.304857] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.304861] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.304865] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.304869] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.304873] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.304877] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.304881] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.304885] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.304889] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.304893] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.304897] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.304900] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.304904] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.304908] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.304911] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.304925] pci 0000:00:00.0: [10de:02f7] type 00 class 0x050000
[ 0.305075] pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
[ 0.305207] pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
[ 0.305344] pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
[ 0.305482] pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
[ 0.305628] pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
[ 0.305776] pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
[ 0.305912] pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
[ 0.308060] pci 0000:00:02.0: [10de:02fc] type 01 class 0x060400
[ 0.308095] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308243] pci 0000:00:03.0: [10de:02fd] type 01 class 0x060400
[ 0.308275] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308421] pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
[ 0.308453] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.308608] pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
[ 0.308834] pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
[ 0.308991] pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
[ 0.309019] pci 0000:00:0a.1: reg 0x20: [io 0x3040-0x307f]
[ 0.309027] pci 0000:00:0a.1: reg 0x24: [io 0x3000-0x303f]
[ 0.309053] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.309203] pci 0000:00:0a.3: [10de:0271] type 00 class 0x0b4000
[ 0.309218] pci 0000:00:0a.3: reg 0x10: [mem 0xc0040000-0xc007ffff]
[ 0.309406] pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
[ 0.309417] pci 0000:00:0b.0: reg 0x10: [mem 0xc0004000-0xc0004fff]
[ 0.309452] pci 0000:00:0b.0: supports D1 D2
[ 0.309455] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309517] pci 0000:00:0b.0: System wakeup disabled by ACPI
[ 0.309611] pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
[ 0.309622] pci 0000:00:0b.1: reg 0x10: [mem 0xc0005000-0xc00050ff]
[ 0.309660] pci 0000:00:0b.1: supports D1 D2
[ 0.309663] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.309724] pci 0000:00:0b.1: System wakeup disabled by ACPI
[ 0.309823] pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
[ 0.309845] pci 0000:00:0d.0: reg 0x20: [io 0x3080-0x308f]
[ 0.309855] pci 0000:00:0d.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.309859] pci 0000:00:0d.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.309862] pci 0000:00:0d.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.309866] pci 0000:00:0d.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.312011] pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
[ 0.312024] pci 0000:00:0e.0: reg 0x10: [io 0x30b0-0x30b7]
[ 0.312031] pci 0000:00:0e.0: reg 0x14: [io 0x30a4-0x30a7]
[ 0.312038] pci 0000:00:0e.0: reg 0x18: [io 0x30a8-0x30af]
[ 0.312044] pci 0000:00:0e.0: reg 0x1c: [io 0x30a0-0x30a3]
[ 0.312051] pci 0000:00:0e.0: reg 0x20: [io 0x3090-0x309f]
[ 0.312058] pci 0000:00:0e.0: reg 0x24: [mem 0xc0006000-0xc0006fff]
[ 0.312212] pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
[ 0.312368] pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
[ 0.312381] pci 0000:00:10.1: reg 0x10: [mem 0xc0000000-0xc0003fff]
[ 0.312423] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.312483] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.312581] pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
[ 0.312592] pci 0000:00:14.0: reg 0x10: [mem 0xc0007000-0xc0007fff]
[ 0.312599] pci 0000:00:14.0: reg 0x14: [io 0x30b8-0x30bf]
[ 0.312628] pci 0000:00:14.0: supports D1 D2
[ 0.312632] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.312779] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.312917] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.313051] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.313181] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.313415] acpiphp: Slot [1] registered
[ 0.313422] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.313428] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.313433] pci 0000:00:02.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.313439] pci 0000:00:02.0: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.313516] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.313604] pci 0000:05:00.0: [10de:0425] type 00 class 0x030000
[ 0.313618] pci 0000:05:00.0: reg 0x10: [mem 0xc1000000-0xc1ffffff]
[ 0.313631] pci 0000:05:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.313642] pci 0000:05:00.0: reg 0x1c: [mem 0xc2000000-0xc3ffffff 64bit]
[ 0.313651] pci 0000:05:00.0: reg 0x24: [io 0x5000-0x507f]
[ 0.313660] pci 0000:05:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.320020] pci 0000:00:04.0: PCI bridge to [bus 05]
[ 0.320025] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff]
[ 0.320029] pci 0000:00:04.0: bridge window [mem 0xc1000000-0xc3ffffff]
[ 0.320035] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.320104] pci 0000:07:06.0: [1106:3044] type 00 class 0x0c0010
[ 0.320117] pci 0000:07:06.0: reg 0x10: [mem 0xc4000000-0xc40007ff]
[ 0.320125] pci 0000:07:06.0: reg 0x14: [io 0x6000-0x607f]
[ 0.320165] pci 0000:07:06.0: supports D2
[ 0.320168] pci 0000:07:06.0: PME# supported from D2 D3hot D3cold
[ 0.320279] pci 0000:00:10.0: PCI bridge to [bus 07] (subtractive decode)
[ 0.320284] pci 0000:00:10.0: bridge window [io 0x6000-0x6fff]
[ 0.320289] pci 0000:00:10.0: bridge window [mem 0xc4000000-0xc40fffff]
[ 0.320294] pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.320298] pci 0000:00:10.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.320302] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.320306] pci 0000:00:10.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.320310] pci 0000:00:10.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.320314] pci 0000:00:10.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.320318] pci 0000:00:10.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.320322] pci 0000:00:10.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.320326] pci 0000:00:10.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.320330] pci 0000:00:10.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.320334] pci 0000:00:10.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.320338] pci 0000:00:10.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.320342] pci 0000:00:10.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.320346] pci 0000:00:10.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.320350] pci 0000:00:10.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.320354] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.320366] pci_bus 0000:00: on NUMA node 0
[ 0.321722] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.321862] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
[ 0.324010] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
[ 0.324147] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.324281] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
[ 0.324412] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.324544] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.324680] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
[ 0.324812] ACPI: PCI Interrupt Link [LSMB] (IRQs 20) *10
[ 0.324943] ACPI: PCI Interrupt Link [LPMU] (IRQs 21) *10
[ 0.325073] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
[ 0.325204] ACPI: PCI Interrupt Link [LUS2] (IRQs 23) *5
[ 0.325333] ACPI: PCI Interrupt Link [LMAC] (IRQs 17) *15
[ 0.325463] ACPI: PCI Interrupt Link [LAZA] (IRQs 19) *0, disabled.
[ 0.325594] ACPI: PCI Interrupt Link [LPID] (IRQs 20) *0, disabled.
[ 0.325731] ACPI: PCI Interrupt Link [LTID] (IRQs 20) *10
[ 0.325863] ACPI: PCI Interrupt Link [LSI1] (IRQs 16) *0, disabled.
[ 0.328032] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.328107] ACPI : EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62
[ 0.328286] vgaarb: setting as boot device: PCI:0000:05:00.0
[ 0.328286] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.328286] vgaarb: loaded
[ 0.328286] vgaarb: bridge control possible 0000:05:00.0
[ 0.328286] PCI: Using ACPI for IRQ routing
[ 0.328286] PCI: pci_cache_line_size set to 64 bytes
[ 0.328299] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 0.328302] e820: reserve RAM buffer [mem 0xbff60000-0xbfffffff]
[ 0.328559] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.328566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.328572] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.332053] Switched to clocksource hpet
[ 0.353715] pnp: PnP ACPI init
[ 0.353742] ACPI: bus type PNP registered
[ 0.353977] system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.353982] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.353987] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.353992] system 00:00: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.353998] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.356127] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.356132] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.356436] system 00:02: [io 0x1000-0x107f] could not be reserved
[ 0.356441] system 00:02: [io 0x1080-0x10ff] has been reserved
[ 0.356445] system 00:02: [io 0x1400-0x147f] has been reserved
[ 0.356450] system 00:02: [io 0x1480-0x14ff] has been reserved
[ 0.356454] system 00:02: [io 0x1800-0x187f] has been reserved
[ 0.356459] system 00:02: [io 0x1880-0x18ff] has been reserved
[ 0.356463] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.356535] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.356598] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.356691] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.357154] system 00:06: [io 0x0360-0x0361] has been reserved
[ 0.357159] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.357164] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.357660] pnp: PnP ACPI: found 7 devices
[ 0.357662] ACPI: bus type PNP unregistered
[ 0.376810] pci 0000:00:03.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.376818] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.376823] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.376851] pci 0000:00:03.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.376855] pci 0000:00:03.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.376859] pci 0000:00:03.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.376874] pci 0000:00:03.0: BAR 14: assigned [mem 0xc0400000-0xc05fffff]
[ 0.376893] pci 0000:00:03.0: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.376900] pci 0000:00:03.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.376906] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.376910] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.376915] pci 0000:00:02.0: bridge window [mem 0xc0200000-0xc03fffff]
[ 0.376920] pci 0000:00:02.0: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.376924] pci 0000:00:03.0: PCI bridge to [bus 03]
[ 0.376928] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.376933] pci 0000:00:03.0: bridge window [mem 0xc0400000-0xc05fffff]
[ 0.376937] pci 0000:00:03.0: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.376945] pci 0000:05:00.0: BAR 6: can’t assign mem pref (size 0x20000)
[ 0.376949] pci 0000:00:04.0: PCI bridge to [bus 05]
[ 0.376953] pci 0000:00:04.0: bridge window [io 0x5000-0x5fff]
[ 0.376957] pci 0000:00:04.0: bridge window [mem 0xc1000000-0xc3ffffff]
[ 0.376962] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.376967] pci 0000:00:10.0: PCI bridge to [bus 07]
[ 0.376971] pci 0000:00:10.0: bridge window [io 0x6000-0x6fff]
[ 0.376976] pci 0000:00:10.0: bridge window [mem 0xc4000000-0xc40fffff]
[ 0.376983] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.376986] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.376989] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.376993] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.376997] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.377000] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.377004] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.377008] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.377011] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.377015] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.377019] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.377022] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.377026] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.377029] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.377033] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.377037] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.377041] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.377045] pci_bus 0000:01: resource 1 [mem 0xc0200000-0xc03fffff]
[ 0.377049] pci_bus 0000:01: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
[ 0.377053] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.377057] pci_bus 0000:03: resource 1 [mem 0xc0400000-0xc05fffff]
[ 0.377061] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[ 0.377065] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.377069] pci_bus 0000:05: resource 1 [mem 0xc1000000-0xc3ffffff]
[ 0.377073] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.377077] pci_bus 0000:07: resource 0 [io 0x6000-0x6fff]
[ 0.377081] pci_bus 0000:07: resource 1 [mem 0xc4000000-0xc40fffff]
[ 0.377085] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.377088] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.377092] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.377096] pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.377099] pci_bus 0000:07: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.377103] pci_bus 0000:07: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.377107] pci_bus 0000:07: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.377110] pci_bus 0000:07: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.377114] pci_bus 0000:07: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.377118] pci_bus 0000:07: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.377121] pci_bus 0000:07: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.377125] pci_bus 0000:07: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.377129] pci_bus 0000:07: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.377132] pci_bus 0000:07: resource 17 [mem 0x000ec000-0x000effff]
[ 0.377136] pci_bus 0000:07: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.377139] pci_bus 0000:07: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.377212] NET: Registered protocol family 2
[ 0.377588] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.377842] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.380230] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.380344] TCP: reno registered
[ 0.380358] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.380423] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.380593] NET: Registered protocol family 1
[ 0.380630] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.380635] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.380681] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.380704] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.380731] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.381077] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.644413] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 0.644511] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.644555] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.644600] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.644633] pci 0000:05:00.0: Video device with shadowed ROM
[ 0.644640] PCI: CLS 64 bytes, default 64
[ 0.644729] Unpacking initramfs…
[ 2.045768] Freeing initrd memory: 21724K (ffff880035582000 - ffff880036ab9000)
[ 2.048279] Simple Boot Flag at 0x36 set to 0x1
[ 2.048445] microcode: AMD CPU family 0xf not supported
[ 2.049680] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 2.049746] audit: initializing netlink subsys (disabled)
[ 2.049784] audit: type=2000 audit(1447691599.048:1): initialized
[ 2.051356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.051395] zbud: loaded
[ 2.052103] VFS: Disk quotas dquot_6.5.2
[ 2.052130] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.052233] msgmni has been set to 6034
[ 2.053766] alg: No test for stdrng (krng)
[ 2.053827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.053996] io scheduler noop registered
[ 2.054000] io scheduler deadline registered
[ 2.054064] io scheduler cfq registered (default)
[ 2.054228] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 2.054315] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[ 2.054392] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[ 2.054513] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.054545] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.054650] GHES: HEST is not enabled!
[ 2.055601] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.057283] Linux agpgart interface v0.103
[ 2.057478] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 2.072811] i8042: Detected active multiplexing controller, rev 1.1
[ 2.081482] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.081493] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.081553] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.081606] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.081657] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.083772] mousedev: PS/2 mouse device common for all mice
[ 2.083856] rtc_cmos 00:05: RTC can wake from S4
[ 2.084283] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.084316] rtc_cmos 00:05: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.084339] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.084773] AMD IOMMUv2 driver by Joerg Roedel joerg.roedel@amd.com
[ 2.084775] AMD IOMMUv2 functionality not available on this system
[ 2.084940] TCP: cubic registered
[ 2.084998] NET: Registered protocol family 10
[ 2.086410] mip6: Mobile IPv6
[ 2.086410] NET: Registered protocol family 17
[ 2.086410] mpls_gso: MPLS GSO support
[ 2.087660] registered taskstats version 1
[ 2.088869] rtc_cmos 00:05: setting system clock to 2015-11-16 16:33:19 UTC (1447691599)
[ 2.088970] PM: Hibernation image not present or could not be loaded.
[ 2.092655] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.092655] Write protecting the kernel read-only data: 8192k
[ 2.100890] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.101873] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.122828] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.148051] systemd-udevd[60]: starting version 215
[ 2.148656] random: systemd-udevd urandom read with 10 bits of entropy available
[ 2.184823] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.184834] ACPI: Power Button [PWRB]
[ 2.184921] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 2.184925] ACPI: Sleep Button [SLPB]
[ 2.185032] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 2.185079] ACPI: Lid Switch [LID]
[ 2.185154] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.185157] ACPI: Power Button [PWRF]
[ 2.213461] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 2.213534] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.213605] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 2.229961] ACPI: bus type USB registered
[ 2.230019] usbcore: registered new interface driver usbfs
[ 2.232053] usbcore: registered new interface driver hub
[ 2.232390] usbcore: registered new device driver usb
[ 2.240820] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.249685] acpi device:17: registered as cooling_device0
[ 2.249773] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input9
[ 2.249945] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
[ 2.257043] SCSI subsystem initialized
[ 2.264292] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 2.264725] ehci-pci: EHCI PCI platform driver
[ 2.265011] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 2.272862] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.272869] ACPI: Thermal Zone [THRM] (62 C)
[ 2.273431] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 2.277320] libata version 3.00 loaded.
[ 2.281679] [drm] Initialized drm 1.1.0 20060810
[ 2.293058] wmi: Mapper loaded
[ 2.316500] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 16
[ 2.316782] nouveau [ DEVICE][0000:05:00.0] BOOT0 : 0x086500a2
[ 2.316787] nouveau [ DEVICE][0000:05:00.0] Chipset: G86 (NV86)
[ 2.316790] nouveau [ DEVICE][0000:05:00.0] Family : NV50
[ 2.316844] nouveau [ VBIOS][0000:05:00.0] checking PRAMIN for image…
[ 2.340088] firewire_ohci 0000:07:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 2.384276] nouveau [ VBIOS][0000:05:00.0] … appears to be valid
[ 2.384280] nouveau [ VBIOS][0000:05:00.0] using image from PRAMIN
[ 2.384528] nouveau [ VBIOS][0000:05:00.0] BIT signature found
[ 2.384533] nouveau [ VBIOS][0000:05:00.0] version 60.86.4c.00.15
[ 2.404833] nouveau 0000:05:00.0: irq 43 for MSI/MSI-X
[ 2.404850] nouveau [ PMC][0000:05:00.0] MSI interrupts enabled
[ 2.404893] nouveau [ PFB][0000:05:00.0] RAM type: DDR2
[ 2.404896] nouveau [ PFB][0000:05:00.0] RAM size: 256 MiB
[ 2.404899] nouveau [ PFB][0000:05:00.0] ZCOMP: 1292 tags
[ 2.408246] nouveau [ VOLT][0000:05:00.0] GPU voltage: 1150000uv
[ 2.436335] nouveau [ PTHERM][0000:05:00.0] FAN control: none / external
[ 2.436351] nouveau [ PTHERM][0000:05:00.0] fan management: automatic
[ 2.436356] nouveau [ PTHERM][0000:05:00.0] internal sensor: yes
[ 2.436377] nouveau [ CLK][0000:05:00.0] 20: core 169 MHz shader 338 MHz memory 100 MHz
[ 2.436383] nouveau [ CLK][0000:05:00.0] 21: core 275 MHz shader 550 MHz memory 200 MHz
[ 2.436389] nouveau [ CLK][0000:05:00.0] 22: core 500 MHz shader 1000 MHz memory 400 MHz
[ 2.436415] nouveau [ CLK][0000:05:00.0] --: core 275 MHz shader 550 MHz memory 199 MHz
[ 2.437240] [TTM] Zone kernel: Available graphics memory: 1546116 kiB
[ 2.437242] [TTM] Initializing pool allocator
[ 2.437252] [TTM] Initializing DMA pool allocator
[ 2.437270] nouveau [ DRM] VRAM: 256 MiB
[ 2.437273] nouveau [ DRM] GART: 1048576 MiB
[ 2.437279] nouveau [ DRM] TMDS table version 2.0
[ 2.437282] nouveau [ DRM] DCB version 4.0
[ 2.437286] nouveau [ DRM] DCB outp 00: 01010323 00000034
[ 2.437290] nouveau [ DRM] DCB outp 01: 02001300 00000028
[ 2.437294] nouveau [ DRM] DCB outp 02: 02002302 00000010
[ 2.437298] nouveau [ DRM] DCB outp 03: 010233f1 0000c070
[ 2.437302] nouveau [ DRM] DCB conn 00: 0040
[ 2.437305] nouveau [ DRM] DCB conn 01: 0100
[ 2.437309] nouveau [ DRM] DCB conn 02: 1230
[ 2.437312] nouveau [ DRM] DCB conn 03: 0311
[ 2.451543] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 2.451543] nouveau W[ DRM] TV-1 has no encoders, removing
[ 2.451543] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.451543] [drm] Driver supports precise vblank timestamp query.
[ 2.465112] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 2.776467] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:14:0b:43:bd:23
[ 2.776473] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 2.777083] ehci-pci 0000:00:0b.1: EHCI Host Controller
[ 2.777099] ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 2.777113] ehci-pci 0000:00:0b.1: debug port 1
[ 2.777152] ehci-pci 0000:00:0b.1: cache line size of 64 is not supported
[ 2.777180] ehci-pci 0000:00:0b.1: irq 23, io mem 0xc0005000
[ 2.788043] ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 2.788293] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.788297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.788300] usb usb1: Product: EHCI Host Controller
[ 2.788303] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.788306] usb usb1: SerialNumber: 0000:00:0b.1
[ 2.788735] hub 1-0:1.0: USB hub found
[ 2.788735] hub 1-0:1.0: 8 ports detected
[ 2.789602] sata_nv 0000:00:0e.0: version 3.5
[ 2.789611] sata_nv 0000:00:0e.0: enabling device (0005 -> 0007)
[ 2.789893] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
[ 2.789916] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 2.792141] ohci-pci: OHCI PCI platform driver
[ 2.792660] scsi0 : sata_nv
[ 2.793205] scsi1 : sata_nv
[ 2.793393] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 20
[ 2.793393] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 20
[ 2.793527] pata_amd 0000:00:0d.0: version 0.4.1
[ 2.796334] scsi2 : pata_amd
[ 2.796730] scsi3 : pata_amd
[ 2.796808] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 2.796811] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 2.797056] ohci-pci 0000:00:0b.0: OHCI PCI host controller
[ 2.797069] ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 2.797122] ohci-pci 0000:00:0b.0: irq 22, io mem 0xc0004000
[ 2.840210] firewire_core 0000:07:06.0: created device fw0: GUID 0040ca014e02d40c, S400
[ 2.853107] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.853111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.853114] usb usb2: Product: OHCI PCI host controller
[ 2.853117] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[ 2.853120] usb usb2: SerialNumber: 0000:00:0b.0
[ 2.854548] hub 2-0:1.0: USB hub found
[ 2.854548] hub 2-0:1.0: 8 ports detected
[ 2.960089] ata3.00: NODEV after polling detection
[ 3.100054] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 3.232484] usb 1-3: New USB device found, idVendor=0bf8, idProduct=100f
[ 3.232488] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.260050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.319019] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 3.319022] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.332658] ata1.00: configured for UDMA/133
[ 3.332839] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 1A01 PQ: 0 ANSI: 5
[ 3.521446] nouveau [ DRM] allocated 1440x900 fb: 0x60000, bo ffff880036795400
[ 3.523067] fbcon: nouveaufb (fb0) is primary device
[ 3.608715] Console: switching to colour frame buffer device 180x56
[ 3.609894] nouveau 0000:05:00.0: fb0: nouveaufb frame buffer device
[ 3.609897] nouveau 0000:05:00.0: registered panic notifier
[ 3.636077] [drm] Initialized nouveau 1.1.2 20120801 for 0000:05:00.0 on minor 0
[ 3.648065] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.832823] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.832904] sd 0:0:0:0: [sda] Write Protect is off
[ 3.832908] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.833156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 3.912420] sda: sda1 sda2 < sda5 >
[ 3.913782] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.915415] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.980120] usb 2-5: new low-speed USB device number 2 using ohci-pci
[ 4.190095] usb 2-5: New USB device found, idVendor=04f3, idProduct=0234
[ 4.190101] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.190105] usb 2-5: Product: OM
[ 4.197211] hidraw: raw HID events driver © Jiri Kosina
[ 4.206535] usbcore: registered new interface driver usbhid
[ 4.206540] usbhid: USB HID core driver
[ 4.208845] input: OM as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/0003:04F3:0234.0001/input/input10
[ 4.208980] hid-generic 0003:04F3:0234.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:0b.0-5/input0
[ 4.286326] PM: Starting manual resume from disk
[ 4.286335] PM: Hibernation image partition 8:5 present
[ 4.286338] PM: Looking for hibernation image.
[ 4.287146] PM: Image not found (code -22)
[ 4.287149] PM: Hibernation image not present or could not be loaded.
[ 4.500099] usb 2-7: new full-speed USB device number 3 using ohci-pci
[ 4.506142] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.735121] usb 2-7: New USB device found, idVendor=0a12, idProduct=0001
[ 4.735129] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.276050] random: nonblocking pool is initialized
[ 7.961955] lp: driver loaded but no devices found
[ 7.978816] systemd-udevd[167]: starting version 215
[ 8.094871] ppdev: user-space parallel port driver
[ 8.260565] fuse init (API version 7.23)
[ 8.359007] Guest personality initialized and is inactive
[ 8.360103] VMCI host device registered (name=vmci, major=10, minor=59)
[ 8.360105] Initialized host personality
[ 9.094449] ACPI: processor limited to max C-state 1
[ 9.357095] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.380260] ACPI: AC Adapter [ACAD] (on-line)
[ 9.408677] ACPI: Battery Slot [BAT0] (battery present)
[ 9.449740] i2c i2c-3: nForce2 SMBus adapter at 0x3040
[ 9.449779] i2c i2c-4: nForce2 SMBus adapter at 0x3000
[ 9.709831] EDAC MC: Ver: 3.0.0
[ 9.772447] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 9.918446] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 9.918592] nv_tco: Watchdog reboot not detected
[ 9.918592] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 10.050842] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.078495] MCE: In-kernel MCE decoding enabled.
[ 10.145679] kvm: disabled by bios
[ 10.163649] kvm: disabled by bios
[ 10.240848] AMD64 EDAC driver v3.4.0
[ 10.240848] EDAC amd64: DRAM ECC disabled.
[ 10.240848] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
(Note that use of the override may cause unknown side effects.)
[ 10.254470] powernow_k8: fid 0x8 (1600 MHz), vid 0x12
[ 10.254470] powernow_k8: fid 0x0 (800 MHz), vid 0x1e
[ 10.257300] powernow_k8: Found 1 AMD Turion™ 64 X2 Mobile Technology TL-52 (2 cpu cores) (version 2.20.00)
[ 10.850656] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 19
[ 10.850656] snd_hda_intel 0000:00:10.1: Disabling MSI
[ 10.878000] input: ALPS PS/2 Device as /devices/platform/i8042/serio4/input/input16
[ 10.901002] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input15
[ 11.013552] Bluetooth: Core ver 2.19
[ 11.013552] NET: Registered protocol family 31
[ 11.013552] Bluetooth: HCI device and connection manager initialized
[ 11.013552] Bluetooth: HCI socket layer initialized
[ 11.013552] Bluetooth: L2CAP socket layer initialized
[ 11.013552] Bluetooth: SCO socket layer initialized
[ 11.098684] usbcore: registered new interface driver btusb
[ 11.372964] Adding 6288380k swap on /dev/sda5. Priority:-1 extents:1 across:6288380k FS
[ 11.708014] sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
[ 11.708018] sound hdaudioC0D0: speaker_outs=2 (0x14/0x16/0x0/0x0/0x0)
[ 11.708020] sound hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.708021] sound hdaudioC0D0: mono: mono_out=0x0
[ 11.708023] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 11.708024] sound hdaudioC0D0: inputs:
[ 11.708026] sound hdaudioC0D0: Internal Mic=0x19
[ 11.708028] sound hdaudioC0D0: Mic=0x18
[ 11.708029] sound hdaudioC0D0: Line=0x1a
[ 11.784403] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.995226] systemd-journald[160]: Received request to flush runtime journal from PID 1
[ 13.472056] sound hdaudioC0D1: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 13.472065] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.472068] sound hdaudioC0D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.472072] sound hdaudioC0D1: mono: mono_out=0x0
[ 13.472074] sound hdaudioC0D1: inputs:
[ 13.853924] RPC: Registered named UNIX socket transport module.
[ 13.853924] RPC: Registered udp transport module.
[ 13.853924] RPC: Registered tcp transport module.
[ 13.853924] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.885575] FS-Cache: Loaded
[ 13.934872] FS-Cache: Netfs ‘nfs’ registered for caching
[ 14.003431] Installing knfsd (copyright © 1996 okir@monad.swb.de).
[ 14.720426] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/sound/card0/hdaudioC0D0/input17
[ 14.722070] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input18
[ 14.724321] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input19
[ 14.724444] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:10.1/sound/card0/input20
[ 18.491542] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.491542] Bluetooth: BNEP filters: protocol multicast
[ 18.491542] Bluetooth: BNEP socket layer initialized
[ 20.492344] cfg80211: Calling CRDA to update world regulatory domain
[ 21.810166] cfg80211: World regulatory domain updated:
[ 21.810174] cfg80211: DFS Master region: unset
[ 21.810177] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 21.810181] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.810184] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.810187] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.810191] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 21.810195] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 21.810198] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 21.810202] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.810204] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 136.862025] [sched_delayed] #4CE: hpet increased min_delta_ns to 11521 nsec
le problème du CDrom reste malheureusement le même.
C’est ma faute, j’ai oublié une commande pour décharger le module [mono]ata_generic[/mono] avant de le recharger avec l’option, sinon ça ne fait rien.
modprobe -r pata_amd
modprobe -r ata_generic
modprobe ata_generic all_generic_ide=1
dmesg | tail -n 40
(Pas besoin de tout le log, juste la fin. Et avec balise “code” au lieu de “quote” stp)
Bonjour,
CDROM pas monté.
Voici le résultat des 40 dernières lignes:
[ 11.359737] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input15
[ 11.426498] usbcore: registered new interface driver btusb
[ 11.468773] systemd-journald[165]: Received request to flush runtime journal from PID 1
[ 11.548050] sound hdaudioC0D1: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 11.548059] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.548063] sound hdaudioC0D1: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.548067] sound hdaudioC0D1: mono: mono_out=0x0
[ 11.548069] sound hdaudioC0D1: inputs:
[ 12.032521] systemd-journald[165]: Received request to flush runtime journal from PID 1
[ 12.728856] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/sound/card0/hdaudioC0D0/input17
[ 12.729438] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input18
[ 12.729497] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input19
[ 12.729547] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:10.1/sound/card0/input20
[ 13.791232] RPC: Registered named UNIX socket transport module.
[ 13.791232] RPC: Registered udp transport module.
[ 13.791232] RPC: Registered tcp transport module.
[ 13.791232] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.834940] FS-Cache: Loaded
[ 13.881900] FS-Cache: Netfs 'nfs' registered for caching
[ 13.974964] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.329663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.329663] Bluetooth: BNEP filters: protocol multicast
[ 18.329663] Bluetooth: BNEP socket layer initialized
[ 19.437795] cfg80211: Calling CRDA to update world regulatory domain
[ 21.013037] cfg80211: World regulatory domain updated:
[ 21.013041] cfg80211: DFS Master region: unset
[ 21.013043] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 21.013045] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.013046] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.013048] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.013050] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 21.013052] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 21.013053] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 21.013055] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 21.013056] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 233.719881] [sched_delayed] #4CE: hpet increased min_delta_ns to 11521 nsec
[ 519.908108] scsi4 : ata_generic
[ 519.917474] scsi5 : ata_generic
[ 519.917607] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 519.917612] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
Les 4 dernières lignes montrent que le module [mono]ata_generic[/mono] s’est bien rechargé et a détecté le contrôleur PATA, mais pas le lecteur CD. Fausse piste donc, désolé.
Bon merci, pour avoir essayé de m’aider.
Avez vous d’autre solution ?
Je découvre d’autre problème:
Le wifi n’est pas détecté, le Bluetooth disfonctionne, etc…
Je cherche, mais si je ne trouve pas, cela me posera problème.
Ouvre un nouveau sujet pour chacun d’eux (car c’est un par sujet).
Certains informations de ce lien pourrais t’aider: a-lire-avant-de-poster-t50239.html
Sinon pour le sujet ici.
Petite recherche sur le modèle du portable et on trouve rapidement des solutions: bugzilla.kernel.org/show_bug.cgi?id=10216#c10
Mais c’est sur des systèmes anciens, faut soit rechercher pour trouver chose récent, soit produire la solution pour les configs d’aujourd’hui.
Partie update: gentoo-wiki.info/Fujitsu-Sie … ilo_Xa2528.
Pour re-faire le même noyau de debian avec petite modif au passage, je penses ne devrait pas être dur à réaliser.
[quote=“kripteks”]Ouvre un nouveau sujet pour chacun d’eux (car c’est un par sujet).
Certains informations de ce lien pourrais t’aider: a-lire-avant-de-poster-t50239.html[/quote]
J’avait lu. Mais si besoin j’avais prévu d’ouvrir un sujet par problème.
[quote]Sinon pour le sujet ici.
Petite recherche sur le modèle du portable et on trouve rapidement des solutions: bugzilla.kernel.org/show_bug.cgi?id=10216#c10
Mais c’est sur des systèmes anciens, faut soit rechercher pour trouver chose récent, soit produire la solution pour les configs d’aujourd’hui.
Partie update: gentoo-wiki.info/Fujitsu-Sie … ilo_Xa2528.[/quote]
Le dernier lien est clair, ce problème CDROM est clairement un problème de Fujitsu-Siemens_Amilo_Xa2528.
Mais là cela dépasse mes compétences. Cette machine sera donc condamné à windows, pour le peu qu’il lui reste à vivre.
En tout cas merci d’avoir cherché ces liens.
Juste pour info, la carte wifi, n’est pas visible non plus.
Merci à ceux qui m’ont aidés.
C’est pas la faute au fabricant.
Pour faire la manip, un débutant ne le pourrait pas, il faut faire la liste des choses à faire.
"Juste pour info, la carte wifi, n’est pas visible non plus."
Où il n’est pas visible ?