Installer pilote intel 200e

Support Debian
#21

Re
Ben je ne savais plus, alors j’ai recommencé.

root@serv:/home/bbsut# modprobe mga root@serv:/home/bbsut#

root@serv:/home/bbsut# lsmod Module Size Used by des_generic 20771 0 ecb 12649 0 md4 12473 0 hmac 12715 1 nls_utf8 12416 1 cifs 219143 2 parport_pc 22036 0 ppdev 12651 0 lp 12797 0 parport 31254 3 lp,ppdev,parport_pc bnep 17288 2 rfcomm 28626 0 bluetooth 103791 10 rfcomm,bnep rfkill 18516 3 bluetooth binfmt_misc 12813 1 nfsd 173890 2 nfs 265921 0 nfs_acl 12463 2 nfs,nfsd auth_rpcgss 32143 2 nfs,nfsd fscache 31978 2 nfs,cifs lockd 57277 2 nfs,nfsd sunrpc 143904 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd loop 17810 0 i2c_i801 12670 0 i2c_core 19116 1 i2c_i801 coretemp 12770 0 button 12817 0 joydev 17010 0 evdev 17225 11 iTCO_wdt 16945 0 iTCO_vendor_support 12632 1 iTCO_wdt acpi_cpufreq 12807 0 mperf 12421 1 acpi_cpufreq i7core_edac 18014 0 processor 27565 1 acpi_cpufreq edac_core 30066 3 i7core_edac crc32c_intel 12659 0 thermal_sys 17752 1 processor pcspkr 12515 0 ext4 306996 5 crc16 12327 2 ext4,bluetooth jbd2 52330 1 ext4 mbcache 12938 1 ext4 sg 21476 0 usbhid 31554 0 hid 64284 1 usbhid sr_mod 17468 0 sd_mod 35425 7 cdrom 34813 1 sr_mod crc_t10dif 12332 1 sd_mod ata_generic 12439 0 ata_piix 25271 6 ehci_hcd 35509 0 libata 125014 2 ata_piix,ata_generic scsi_mod 135037 4 libata,sd_mod,sr_mod,sg e1000e 113559 0 usbcore 104555 3 ehci_hcd,usbhid usb_common 12338 1 usbcore

root@serv:/home/bbsut# modprobe mga root@serv:/home/bbsut#

#22

Un peu plus rigoureux:

  1. démarrer l’ordi
  2. lsmod
  3. modprobe mga
  4. lsmod

Ton module mga n’est pas chargé d’après lsmod, donc j’en conclue qu’il ne l’est que lorsque tu le charges manuellement.

Soit.

J’avoue qu’on fait peut-être fausse route depuis un moment. Peux-tu rappeller quel est le problème que tu as avec ton affichage ?

#23

gnome démarre en config minimum, affichage “d’éléphant” et saccadé

root@serv:/home/bbsut# lsmod Module Size Used by des_generic 20771 0 ecb 12649 0 md4 12473 0 hmac 12715 1 nls_utf8 12416 1 cifs 219143 2 bnep 17288 2 parport_pc 22036 0 ppdev 12651 0 rfcomm 28626 0 bluetooth 103791 10 rfcomm,bnep rfkill 18516 3 bluetooth lp 12797 0 parport 31254 3 lp,ppdev,parport_pc binfmt_misc 12813 1 nfsd 173890 2 nfs 265921 0 nfs_acl 12463 2 nfs,nfsd auth_rpcgss 32143 2 nfs,nfsd fscache 31978 2 nfs,cifs lockd 57277 2 nfs,nfsd sunrpc 143904 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd loop 17810 0 iTCO_wdt 16945 0 coretemp 12770 0 i7core_edac 18014 0 edac_core 30066 3 i7core_edac i2c_i801 12670 0 crc32c_intel 12659 0 acpi_cpufreq 12807 0 mperf 12421 1 acpi_cpufreq iTCO_vendor_support 12632 1 iTCO_wdt processor 27565 1 acpi_cpufreq i2c_core 19116 1 i2c_i801 joydev 17010 0 button 12817 0 evdev 17225 11 pcspkr 12515 0 thermal_sys 17752 1 processor ext4 306996 5 crc16 12327 2 ext4,bluetooth jbd2 52330 1 ext4 mbcache 12938 1 ext4 sg 21476 0 sr_mod 17468 0 sd_mod 35425 7 cdrom 34813 1 sr_mod crc_t10dif 12332 1 sd_mod usbhid 31554 0 hid 64284 1 usbhid ata_generic 12439 0 ata_piix 25271 6 libata 125014 2 ata_piix,ata_generic scsi_mod 135037 4 libata,sd_mod,sr_mod,sg e1000e 113559 0 ehci_hcd 35509 0 usbcore 104555 3 ehci_hcd,usbhid usb_common 12338 1 usbcore root@serv:/home/bbsut# modprobe mga root@serv:/home/bbsut# lsmod Module Size Used by mga 26157 0 drm 146387 1 mga des_generic 20771 0 ecb 12649 0 md4 12473 0 hmac 12715 1 nls_utf8 12416 1 cifs 219143 2 bnep 17288 2 parport_pc 22036 0 ppdev 12651 0 rfcomm 28626 0 bluetooth 103791 10 rfcomm,bnep rfkill 18516 3 bluetooth lp 12797 0 parport 31254 3 lp,ppdev,parport_pc binfmt_misc 12813 1 nfsd 173890 2 nfs 265921 0 nfs_acl 12463 2 nfs,nfsd auth_rpcgss 32143 2 nfs,nfsd fscache 31978 2 nfs,cifs lockd 57277 2 nfs,nfsd sunrpc 143904 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd loop 17810 0 iTCO_wdt 16945 0 coretemp 12770 0 i7core_edac 18014 0 edac_core 30066 3 i7core_edac i2c_i801 12670 0 crc32c_intel 12659 0 acpi_cpufreq 12807 0 mperf 12421 1 acpi_cpufreq iTCO_vendor_support 12632 1 iTCO_wdt processor 27565 1 acpi_cpufreq i2c_core 19116 2 i2c_i801,drm joydev 17010 0 button 12817 0 evdev 17225 11 pcspkr 12515 0 thermal_sys 17752 1 processor ext4 306996 5 crc16 12327 2 ext4,bluetooth jbd2 52330 1 ext4 mbcache 12938 1 ext4 sg 21476 0 sr_mod 17468 0 sd_mod 35425 7 cdrom 34813 1 sr_mod crc_t10dif 12332 1 sd_mod usbhid 31554 0 hid 64284 1 usbhid ata_generic 12439 0 ata_piix 25271 6 libata 125014 2 ata_piix,ata_generic scsi_mod 135037 4 libata,sd_mod,sr_mod,sg e1000e 113559 0 ehci_hcd 35509 0 usbcore 104555 3 ehci_hcd,usbhid usb_common 12338 1 usbcore

#24

Ouaip, mais Gnome nécessite une certaine version d’OpenGL, et je pense que ça marchera jamais sur ta Matrox.
Voir aussi: reconnaissance-du-peripherique-interne-d-entree-suite-t47045-25.html#p473133

Indique le retour de:

#25

root@serv:/home/bbsut# glxinfo | grep version server glx version string: 1.4 client glx version string: 1.4 GLX version: 1.4 OpenGL version string: 2.1 Mesa 8.0.5 OpenGL shading language version string: 1.20 root@serv:/home/bbsut#
Carte Intel S3420gp processeur X3430
Moi je ne suis pas raciste, Gnome ou autre, je ne recherche pas de tralala, les appli inutiles(les 3/4 de ce que que je vois sur le bureau)… le principal serait d’avoir un affichage correct… mais bon s’il faut s’en contenter…

#26

Tu peux tenter XFCE.

Mais les ralentissements que tu constates sont un peu étranges malgré tout.
Donc je me demande si ton Xorg ne tourne pas en VESA plutôt qu’avec le driver Matrox.

Joins au forum l’intégralité de ton fichier [mono]/var/log/Xorg.0.log[/mono].

#27

[code][ 18.561]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 18.561] X Protocol Version 11, Revision 0
[ 18.561] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[ 18.561] Current Operating System: Linux serv 3.2.0-4-686-pae #1 SMP Debian 3.2.54-2 i686
[ 18.561] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=b6470f6f-cd3b-4716-8cbf-6f02bccd9f27 ro quiet
[ 18.561] Build Date: 17 December 2013 08:37:13PM
[ 18.561] xorg-server 2:1.12.4-6+deb7u2 (Julien Cristau jcristau@debian.org)
[ 18.561] Current version of pixman: 0.26.0
[ 18.561] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.561] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.561] (==) Log file: “/var/log/Xorg.0.log”, Time: Mon Mar 31 08:09:51 2014
[ 18.601] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 18.628] (==) No Layout section. Using the first Screen section.
[ 18.628] (==) No screen section available. Using defaults.
[ 18.628] () |–>Screen “Default Screen Section” (0)
[ 18.628] (**) | |–>Monitor “”
[ 18.636] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 18.636] (==) Automatically adding devices
[ 18.636] (==) Automatically enabling devices
[ 18.656] (WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
[ 18.656] Entry deleted from font path.
[ 18.657] (WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
[ 18.657] Entry deleted from font path.
[ 18.657] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 18.657] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 18.657] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.657] (II) Loader magic: 0xb775b5a0
[ 18.657] (II) Module ABI versions:
[ 18.657] X.Org ANSI C Emulation: 0.4
[ 18.657] X.Org Video Driver: 12.1
[ 18.657] X.Org XInput driver : 16.0
[ 18.657] X.Org Server Extension : 6.0
[ 18.658] (–) PCI:*(0:3:0:0) 102b:0522:8086:0101 rev 2, Mem @ 0xb0000000/16777216, 0xb1800000/16384, 0xb1000000/8388608, BIOS @ 0x???/65536
[ 18.658] (II) Open ACPI successful (/var/run/acpid.socket)
[ 18.658] (II) LoadModule: “extmod”
[ 18.668] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 18.725] (II) Module extmod: vendor=“X.Org Foundation”
[ 18.725] compiled for 1.12.4, module version = 1.0.0
[ 18.725] Module class: X.Org Server Extension
[ 18.725] ABI class: X.Org Server Extension, version 6.0
[ 18.725] (II) Loading extension SELinux
[ 18.725] (II) Loading extension MIT-SCREEN-SAVER
[ 18.725] (II) Loading extension XFree86-VidModeExtension
[ 18.725] (II) Loading extension XFree86-DGA
[ 18.725] (II) Loading extension DPMS
[ 18.725] (II) Loading extension XVideo
[ 18.725] (II) Loading extension XVideo-MotionCompensation
[ 18.725] (II) Loading extension X-Resource
[ 18.725] (II) LoadModule: “dbe”
[ 18.725] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 18.743] (II) Module dbe: vendor=“X.Org Foundation”
[ 18.743] compiled for 1.12.4, module version = 1.0.0
[ 18.743] Module class: X.Org Server Extension
[ 18.743] ABI class: X.Org Server Extension, version 6.0
[ 18.743] (II) Loading extension DOUBLE-BUFFER
[ 18.743] (II) LoadModule: “glx”
[ 18.744] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.765] (II) Module glx: vendor=“X.Org Foundation”
[ 18.765] compiled for 1.12.4, module version = 1.0.0
[ 18.765] ABI class: X.Org Server Extension, version 6.0
[ 18.765] (==) AIGLX enabled
[ 18.766] (II) Loading extension GLX
[ 18.766] (II) LoadModule: “record”
[ 18.766] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 18.766] (II) Module record: vendor=“X.Org Foundation”
[ 18.766] compiled for 1.12.4, module version = 1.13.0
[ 18.766] Module class: X.Org Server Extension
[ 18.766] ABI class: X.Org Server Extension, version 6.0
[ 18.767] (II) Loading extension RECORD
[ 18.767] (II) LoadModule: “dri”
[ 18.767] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 18.772] (II) Module dri: vendor=“X.Org Foundation”
[ 18.772] compiled for 1.12.4, module version = 1.0.0
[ 18.772] ABI class: X.Org Server Extension, version 6.0
[ 18.772] (II) Loading extension XFree86-DRI
[ 18.772] (II) LoadModule: “dri2”
[ 18.773] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 18.780] (II) Module dri2: vendor=“X.Org Foundation”
[ 18.780] compiled for 1.12.4, module version = 1.2.0
[ 18.780] ABI class: X.Org Server Extension, version 6.0
[ 18.780] (II) Loading extension DRI2
[ 18.780] (==) Matched mga as autoconfigured driver 0
[ 18.780] (==) Matched vesa as autoconfigured driver 1
[ 18.780] (==) Matched fbdev as autoconfigured driver 2
[ 18.780] (==) Assigned the driver to the xf86ConfigLayout
[ 18.780] (II) LoadModule: “mga”
[ 18.780] (II) Loading /usr/lib/xorg/modules/drivers/mga_drv.so
[ 18.796] (II) Module mga: vendor=“X.Org Foundation”
[ 18.796] compiled for 1.12.4, module version = 1.5.0
[ 18.796] Module class: X.Org Video Driver
[ 18.796] ABI class: X.Org Video Driver, version 12.1
[ 18.796] (II) LoadModule: “vesa”
[ 18.796] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 18.801] (II) Module vesa: vendor=“X.Org Foundation”
[ 18.801] compiled for 1.12.1, module version = 2.3.1
[ 18.801] Module class: X.Org Video Driver
[ 18.801] ABI class: X.Org Video Driver, version 12.0
[ 18.801] (II) LoadModule: “fbdev”
[ 18.801] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 18.940] (II) Module fbdev: vendor=“X.Org Foundation”
[ 18.940] compiled for 1.12.1, module version = 0.4.2
[ 18.940] ABI class: X.Org Video Driver, version 12.0
[ 18.940] (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI,
mgag200 SE A PCI, mgag200 SE B PCI, mgag200 EV Maxim,
mgag200 ER SH7757, mgag200 eW Nuvoton, mgag200eH, mgag400, mgag550
[ 18.940] (II) VESA: driver for VESA chipsets: vesa
[ 18.940] (II) FBDEV: driver for framebuffer: fbdev
[ 18.940] (++) using VT number 7

[ 18.958] (WW) Falling back to old probe method for vesa
[ 18.958] (WW) Falling back to old probe method for fbdev
[ 18.958] (II) Loading sub module “fbdevhw”
[ 18.958] (II) LoadModule: “fbdevhw”
[ 18.958] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 19.048] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 19.048] compiled for 1.12.4, module version = 0.0.2
[ 19.048] ABI class: X.Org Video Driver, version 12.1
[ 19.048] (EE) open /dev/fb0: No such file or directory
[ 19.048] (II) Loading sub module “vgahw”
[ 19.048] (II) LoadModule: “vgahw”
[ 19.049] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 19.049] (II) Module vgahw: vendor=“X.Org Foundation”
[ 19.049] compiled for 1.12.4, module version = 0.1.0
[ 19.050] ABI class: X.Org Video Driver, version 12.1
[ 19.050] (–) MGA(0): Chipset: “mgag200 SE A PCI”
[ 19.050] (–) MGA(0): Linear framebuffer at 0xB0000000
[ 19.050] (–) MGA(0): MMIO registers at 0xB1800000
[ 19.050] (–) MGA(0): Pseudo-DMA transfer window at 0xB1000000
[ 19.050] (II) MGA(0): MAPPED Framebuffer B0000000 400000 to FFFFFFFFB6BAE000.
[ 19.051] (II) MGA(0): UNMAPPING framebuffer 0xFFFFFFFFB6BAE000, 0x400000.
[ 19.054] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to FFFFFFFFB5FAE000.
[ 19.128] (II) MGA(0): UNMAPPING framebuffer 0xFFFFFFFFB5FAE000, 0x1000000.
[ 19.131] (II) MGA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 19.131] (==) MGA(0): Depth 24, (–) framebuffer bpp 32
[ 19.131] (==) MGA(0): RGB weight 888
[ 19.131] (II) MGA(0): Disabling MTRR support.
[ 19.131] (==) MGA(0): Using AGP 1x mode
[ 19.131] (==) MGA(0): Using HW cursor
[ 19.131] (==) MGA(0): Using XAA acceleration
[ 19.131] (II) Loading sub module “xaa”
[ 19.131] (II) LoadModule: “xaa”
[ 19.131] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 19.149] (II) Module xaa: vendor=“X.Org Foundation”
[ 19.149] compiled for 1.12.4, module version = 1.2.1
[ 19.149] ABI class: X.Org Video Driver, version 12.1
[ 19.152] (–) MGA(0): Video BIOS info block at offset 0x07AE0
[ 19.152] (==) MGA(0): VideoRAM: 8128 kByte
[ 19.152] (II) Loading sub module “ddc”
[ 19.152] (II) LoadModule: “ddc”
[ 19.152] (II) Module “ddc” already built-in
[ 19.152] (II) Loading sub module “i2c”
[ 19.152] (II) LoadModule: “i2c”
[ 19.152] (II) Module “i2c” already built-in
[ 19.153] (II) MGA(0): MAPPED Framebuffer B0000000 7f0000 to FFFFFFFFB6757000.
[ 19.154] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 19.513] (II) MGA(0): I2C bus “DDC P1” initialized.
[ 19.513] (II) MGA(0): I2C device “DDC P1:ddc2” registered at address 0xA0.
[ 19.576] (II) MGA(0): I2C monitor info
[ 19.576] (II) MGA(0): Manufacturer: DEL Model: a006 Serial#: 825504341
[ 19.576] (II) MGA(0): Year: 2003 Week: 15
[ 19.576] (II) MGA(0): EDID Version: 1.3
[ 19.576] (II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 19.576] (II) MGA(0): Sync: Separate
[ 19.576] (II) MGA(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 19.576] (II) MGA(0): Gamma: 2.20
[ 19.576] (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 19.576] (II) MGA(0): Default color space is primary color space
[ 19.576] (II) MGA(0): First detailed timing is preferred mode
[ 19.576] (II) MGA(0): redX: 0.640 redY: 0.340 greenX: 0.279 greenY: 0.619
[ 19.576] (II) MGA(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
[ 19.576] (II) MGA(0): Supported established timings:
[ 19.576] (II) MGA(0): 720x400@70Hz
[ 19.576] (II) MGA(0): 640x480@60Hz
[ 19.576] (II) MGA(0): 640x480@75Hz
[ 19.576] (II) MGA(0): 800x600@60Hz
[ 19.576] (II) MGA(0): 800x600@75Hz
[ 19.576] (II) MGA(0): 1024x768@60Hz
[ 19.576] (II) MGA(0): 1024x768@75Hz
[ 19.576] (II) MGA(0): 1280x1024@75Hz
[ 19.576] (II) MGA(0): Manufacturer’s mask: 0
[ 19.576] (II) MGA(0): Supported standard timings:
[ 19.576] (II) MGA(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 19.576] (II) MGA(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 19.576] (II) MGA(0): Supported detailed timing:
[ 19.576] (II) MGA(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 19.576] (II) MGA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 19.576] (II) MGA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 19.576] (II) MGA(0): Serial No: 5W541348142U
[ 19.576] (II) MGA(0): Monitor name: DELL E171FPb
[ 19.576] (II) MGA(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 145 MHz
[ 19.576] (II) MGA(0): EDID (in hex):
[ 19.576] (II) MGA(0): 00ffffffffffff0010ac06a055323431
[ 19.576] (II) MGA(0): 0f0d010368221b78eecaf6a357479e23
[ 19.576] (II) MGA(0): 114f54a54b00714f8180010101010101
[ 19.576] (II) MGA(0): 010101010101302a009851002a403070
[ 19.576] (II) MGA(0): 1300520e1100001e000000ff00355735
[ 19.576] (II) MGA(0): 3431333438313432550a000000fc0044
[ 19.576] (II) MGA(0): 454c4c20453137314650620a000000fd
[ 19.576] (II) MGA(0): 00384b1f500e000a20202020202000cd
[ 19.576] (II) MGA(0): end of monitor info
[ 19.839] (II) MGA(0): UNMAPPING framebuffer 0xFFFFFFFFB6757000, 0x7F0000.
[ 19.842] (II) MGA(0): EDID vendor “DEL”, prod id 40966
[ 19.867] (II) MGA(0): Using EDID range info for horizontal sync
[ 19.867] (II) MGA(0): Using EDID range info for vertical refresh
[ 19.867] (II) MGA(0): Printing DDC gathered Modelines:
[ 19.867] (II) MGA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 19.867] (II) MGA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 19.867] (II) MGA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 19.867] (II) MGA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 19.867] (II) MGA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 19.867] (II) MGA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 19.867] (II) MGA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 19.867] (II) MGA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 19.867] (II) MGA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 19.867] (II) MGA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 19.867] (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 19.867] (==) MGA(0): Min pixel clock is 17 MHz
[ 19.867] (–) MGA(0): Max pixel clock is 230 MHz
[ 19.867] (II) MGA(0): : Using hsync range of 31.00-80.00 kHz
[ 19.867] (II) MGA(0): : Using vrefresh range of 56.00-75.00 Hz
[ 19.867] (II) MGA(0): : Using maximum pixel clock of 145.00 MHz
[ 19.867] (II) MGA(0): Estimated virtual size for aspect ratio 1.2593 is 1280x1024
[ 19.867] (II) MGA(0): Clock range: 17.75 to 230.00 MHz
[ 19.867] (II) MGA(0): Not using default mode “640x350” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “320x175” (bad mode clock/interlace/doublescan)
[ 19.867] (II) MGA(0): Not using default mode “640x400” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “320x200” (bad mode clock/interlace/doublescan)
[ 19.867] (II) MGA(0): Not using default mode “720x400” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “360x200” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
[ 19.867] (II) MGA(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
[ 19.867] (II) MGA(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
[ 19.867] (II) MGA(0): Not using default mode “640x480” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “320x240” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “800x600” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “400x300” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “1024x768i” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “512x384i” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “1024x768” (mode requires too much memory bandwidth)
[ 19.867] (II) MGA(0): Not using default mode “512x384” (vrefresh out of range)
[ 19.867] (II) MGA(0): Not using default mode “1152x864” (mode requires too much memory bandwidth)
[ 19.867] (II) MGA(0): Not using default mode “1280x960” (mode requires too much memory bandwidth)
[ 19.867] (II) MGA(0): Not using default mode “1280x960” (mode requires too much memory bandwidth)
[ 19.867] (II) MGA(0): Not using default mode “640x480” (hsync out of range)
[ 19.867] (II) MGA(0): Not using default mode “1280x1024” (mode requires too much memory bandwidth)
[ 19.867] (II) MGA(0): Not using default mode “1280x1024” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1280x1024” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “640x512” (hsync out of range)
[ 19.876] (II) MGA(0): Not using default mode “1600x1200” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1600x1200” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “800x600” (hsync out of range)
[ 19.876] (II) MGA(0): Not using default mode “1600x1200” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “800x600” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1600x1200” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “800x600” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1600x1200” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “800x600” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1792x1344” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “896x672” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1792x1344” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “896x672” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1856x1392” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “928x696” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1856x1392” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “928x696” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1920x1440” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “960x720” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1920x1440” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “960x720” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1152x864” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1152x864” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1152x864” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “576x432” (vrefresh out of range)
[ 19.876] (II) MGA(0): Not using default mode “1152x864” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “576x432” (vrefresh out of range)
[ 19.876] (II) MGA(0): Not using default mode “1152x864” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “576x432” (hsync out of range)
[ 19.876] (II) MGA(0): Not using default mode “1360x768” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1360x768” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1400x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1400x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1400x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “700x525” (hsync out of range)
[ 19.876] (II) MGA(0): Not using default mode “1400x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “700x525” (hsync out of range)
[ 19.876] (II) MGA(0): Not using default mode “1440x900” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1600x1024” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1680x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1680x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1680x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1680x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “840x525” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1680x1050” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “840x525” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1920x1080” (width too large for virtual size)
[ 19.876] (II) MGA(0): Not using default mode “1920x1200” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “960x600” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “1920x1440” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “960x720” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “2048x1536” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “1024x768” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “2048x1536” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “1024x768” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using default mode “2048x1536” (insufficient memory for mode)
[ 19.876] (II) MGA(0): Not using default mode “1024x768” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using driver mode “1280x1024” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using driver mode “1280x1024” (mode requires too much memory bandwidth)
[ 19.876] (II) MGA(0): Not using driver mode “1152x864” (mode requires too much memory bandwidth)
[ 19.877] (WW) MGA(0): Shrinking virtual size estimate from 1280x1024 to 1024x768
[ 19.877] (II) MGA(0): Not using default mode “1152x864” (height too large for virtual size)
[ 19.877] (–) MGA(0): Has SDRAM
[ 19.877] (–) MGA(0): Virtual size is 1024x768 (pitch 1024)
[ 19.877] () MGA(0): *Driver mode “1024x768”: 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 19.877] (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz ez)
[ 19.877] () MGA(0): *Driver mode “1024x768”: 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 19.877] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz ez)
[ 19.877] () MGA(0): *Default mode “1024x768”: 78.8 MHz, 60.0 kHz, 75.0 Hz
[ 19.877] (II) MGA(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz zd)
[ 19.877] () MGA(0): *Default mode “1024x768”: 75.0 MHz, 56.5 kHz, 70.1 Hz
[ 19.877] (II) MGA(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz zd)
[ 19.877] () MGA(0): *Default mode “1024x768”: 65.0 MHz, 48.4 kHz, 60.0 Hz
[ 19.877] (II) MGA(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz zd)
[ 19.877] () MGA(0): *Default mode “832x624”: 57.3 MHz, 49.7 kHz, 74.6 Hz
[ 19.877] (II) MGA(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz zd)
[ 19.877] () MGA(0): *Driver mode “800x600”: 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 19.877] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz ez)
[ 19.877] () MGA(0): *Driver mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 19.877] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz ez)
[ 19.877] () MGA(0): *Default mode “800x600”: 49.5 MHz, 46.9 kHz, 75.0 Hz
[ 19.877] (II) MGA(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz zd)
[ 19.877] () MGA(0): *Default mode “800x600”: 50.0 MHz, 48.1 kHz, 72.2 Hz
[ 19.877] (II) MGA(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz zd)
[ 19.877] () MGA(0): *Default mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
[ 19.877] (II) MGA(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz zd)
[ 19.877] () MGA(0): *Default mode “800x600”: 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz zd)
[ 19.877] () MGA(0): *Default mode “800x600”: 36.0 MHz, 35.2 kHz, 56.2 Hz
[ 19.877] (II) MGA(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz zd)
[ 19.877] () MGA(0): *Default mode “840x525”: 87.0 MHz, 76.6 kHz, 69.9 Hz (D)
[ 19.877] (II) MGA(0): Modeline "840x525"x69.9 87.00 840 900 988 1136 525 526 529 548 doublescan -hsync +vsync (76.6 kHz zd)
[ 19.877] () MGA(0): *Default mode “840x525”: 73.1 MHz, 65.3 kHz, 60.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz zd)
[ 19.877] () MGA(0): *Default mode “700x525”: 72.5 MHz, 76.5 kHz, 70.1 Hz (D)
[ 19.877] (II) MGA(0): Modeline "700x525"x70.1 72.53 700 748 824 948 525 525 527 546 doublescan -hsync +vsync (76.5 kHz zd)
[ 19.877] () MGA(0): *Default mode “700x525”: 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz zd)
[ 19.877] () MGA(0): *Default mode “640x512”: 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz zd)
[ 19.877] () MGA(0): *Default mode “640x512”: 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz zd)
[ 19.877] () MGA(0): *Default mode “720x450”: 53.2 MHz, 55.9 kHz, 59.9 Hz (D)
[ 19.877] (II) MGA(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz zd)
[ 19.877] () MGA(0): *Driver mode “640x480”: 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 19.877] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz ez)
[ 19.877] () MGA(0): *Driver mode “640x480”: 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 19.877] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz ez)
[ 19.877] () MGA(0): *Default mode “640x480”: 31.5 MHz, 37.5 kHz, 75.0 Hz
[ 19.877] (II) MGA(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz zd)
[ 19.877] () MGA(0): *Default mode “640x480”: 31.5 MHz, 37.9 kHz, 72.8 Hz
[ 19.877] (II) MGA(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz zd)
[ 19.877] () MGA(0): *Default mode “640x480”: 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz zd)
[ 19.877] () MGA(0): *Default mode “640x480”: 25.2 MHz, 31.5 kHz, 59.9 Hz
[ 19.877] (II) MGA(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz zd)
[ 19.877] () MGA(0): *Driver mode “720x400”: 28.3 MHz, 31.5 kHz, 70.1 Hz
[ 19.877] (II) MGA(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz ez)
[ 19.877] () MGA(0): *Default mode “680x384”: 36.0 MHz, 47.4 kHz, 60.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz zd)
[ 19.877] () MGA(0): *Default mode “680x384”: 42.4 MHz, 47.7 kHz, 59.8 Hz (D)
[ 19.877] (II) MGA(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz zd)
[ 19.877] () MGA(0): *Default mode “576x432”: 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz zd)
[ 19.877] () MGA(0): *Default mode “576x432”: 52.5 MHz, 67.6 kHz, 75.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "576x432"x75.0 52.49 576 612 676 776 432 432 434 451 doublescan -hsync +vsync (67.6 kHz zd)
[ 19.877] () MGA(0): *Default mode “576x432”: 48.4 MHz, 63.0 kHz, 70.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "576x432"x70.0 48.38 576 612 672 768 432 432 434 450 doublescan -hsync +vsync (63.0 kHz zd)
[ 19.877] () MGA(0): *Default mode “576x432”: 40.8 MHz, 53.7 kHz, 60.1 Hz (D)
[ 19.877] (II) MGA(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz zd)
[ 19.877] () MGA(0): *Default mode “512x384”: 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz zd)
[ 19.877] () MGA(0): *Default mode “512x384”: 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
[ 19.877] (II) MGA(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz zd)
[ 19.877] () MGA(0): *Default mode “512x384”: 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
[ 19.877] (II) MGA(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz zd)
[ 19.877] () MGA(0): *Default mode “416x312”: 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
[ 19.877] (II) MGA(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz zd)
[ 19.877] () MGA(0): *Default mode “400x300”: 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
[ 19.877] (II) MGA(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz zd)
[ 19.877] () MGA(0): *Default mode “400x300”: 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
[ 19.877] (II) MGA(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz zd)
[ 19.877] () MGA(0): *Default mode “400x300”: 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
[ 19.877] (II) MGA(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz zd)
[ 19.877] () MGA(0): *Default mode “400x300”: 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
[ 19.878] (II) MGA(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz zd)
[ 19.878] () MGA(0): Display dimensions: (340, 270) mm
[ 19.878] () MGA(0): DPI set to (76, 72)
[ 19.878] (II) MGA(0): YDstOrg is set to 0
[ 19.878] (II) Loading sub module “fb”
[ 19.878] (II) LoadModule: “fb”
[ 19.878] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.948] (II) Module fb: vendor=“X.Org Foundation”
[ 19.948] compiled for 1.12.4, module version = 1.0.0
[ 19.948] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.948] (II) Loading sub module “ramdac”
[ 19.948] (II) LoadModule: “ramdac”
[ 19.948] (II) Module “ramdac” already built-in
[ 19.949] (II) UnloadModule: “vesa”
[ 19.949] (II) Unloading vesa
[ 19.949] (II) UnloadModule: “fbdev”
[ 19.949] (II) Unloading fbdev
[ 19.949] (II) UnloadSubModule: “fbdevhw”
[ 19.949] (II) Unloading fbdevhw
[ 19.949] (–) Depth 24 pixmap format is 32 bpp
[ 19.953] (II) MGA(0): MAPPED Framebuffer B0000000 1000000 to FFFFFFFFB5F23000.
[ 19.955] (II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 20.481] (–) MGA(0): 64 DWORD fifo
[ 20.508] (II) MGA(0): Clock == 78750
[ 20.508] (II) MGA(0): BitsPerPixel == 32
[ 20.508] (II) MGA(0): HiPriLvl == 03
[ 20.518] (==) MGA(0): Default visual is TrueColor
[ 20.518] (WW) MGA(0): Not supported by hardware, not initializing the DRI
[ 20.530] (II) MGA(0): Using -512 lines for offscreen memory.
[ 20.530] (II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
[ 20.530] Screen to screen bit blits
[ 20.530] Solid filled rectangles
[ 20.530] Solid filled trapezoids
[ 20.530] 8x8 mono pattern filled rectangles
[ 20.530] 8x8 mono pattern filled trapezoids
[ 20.530] Indirect CPU to Screen color expansion
[ 20.530] Screen to Screen color expansion
[ 20.530] Solid Lines
[ 20.530] Dashed Lines
[ 20.530] Scanline Image Writes
[ 20.539] (==) MGA(0): Backing store disabled
[ 20.539] (==) MGA(0): Silken mouse enabled
[ 20.540] (==) MGA(0): DPMS enabled
[ 20.540] (WW) MGA(0): Direct rendering disabled
[ 20.540] (WW) MGA(0): Option “MTRR” is not used
[ 20.540] (==) RandR enabled
[ 20.540] (II) Initializing built-in extension Generic Event Extension
[ 20.540] (II) Initializing built-in extension SHAPE
[ 20.540] (II) Initializing built-in extension MIT-SHM
[ 20.540] (II) Initializing built-in extension XInputExtension
[ 20.540] (II) Initializing built-in extension XTEST
[ 20.540] (II) Initializing built-in extension BIG-REQUESTS
[ 20.540] (II) Initializing built-in extension SYNC
[ 20.540] (II) Initializing built-in extension XKEYBOARD
[ 20.540] (II) Initializing built-in extension XC-MISC
[ 20.540] (II) Initializing built-in extension SECURITY
[ 20.540] (II) Initializing built-in extension XINERAMA
[ 20.540] (II) Initializing built-in extension XFIXES
[ 20.540] (II) Initializing built-in extension RENDER
[ 20.540] (II) Initializing built-in extension RANDR
[ 20.540] (II) Initializing built-in extension COMPOSITE
[ 20.540] (II) Initializing built-in extension DAMAGE
[ 20.540] (II) SELinux: Disabled on system
[ 20.552] (II) AIGLX: Screen 0 is not DRI2 capable
[ 20.552] (II) AIGLX: Screen 0 is not DRI capable
[ 21.812] (II) AIGLX: Loaded and initialized swrast
[ 21.812] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 22.154] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[ 22.154] () Power Button: Applying InputClass “evdev keyboard catchall”
[ 22.154] (II) LoadModule: “evdev”
[ 22.154] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.164] (II) Module evdev: vendor=“X.Org Foundation”
[ 22.164] compiled for 1.12.1, module version = 2.7.0
[ 22.164] Module class: X.Org XInput Driver
[ 22.164] ABI class: X.Org XInput driver, version 16.0
[ 22.165] (II) Using input driver ‘evdev’ for ‘Power Button’
[ 22.165] () Power Button: always reports core events
[ 22.165] () evdev: Power Button: Device: “/dev/input/event7”
[ 22.165] (–) evdev: Power Button: Vendor 0 Product 0x1
[ 22.165] (–) evdev: Power Button: Found keys
[ 22.165] (II) evdev: Power Button: Configuring as keyboard
[ 22.165] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event7”
[ 22.165] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[ 22.165] () Option “xkb_rules” “evdev”
[ 22.165] () Option “xkb_model” “pc105”
[ 22.165] () Option “xkb_layout” “fr”
[ 22.165] () Option “xkb_variant” “latin9”
[ 22.234] (II) config/udev: Adding input device Sleep Button (/dev/input/event6)
[ 22.234] () Sleep Button: Applying InputClass “evdev keyboard catchall”
[ 22.234] (II) Using input driver ‘evdev’ for ‘Sleep Button’
[ 22.234] () Sleep Button: always reports core events
[ 22.234] () evdev: Sleep Button: Device: “/dev/input/event6”
[ 22.234] (–) evdev: Sleep Button: Vendor 0 Product 0x3
[ 22.234] (–) evdev: Sleep Button: Found keys
[ 22.234] (II) evdev: Sleep Button: Configuring as keyboard
[ 22.234] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event6”
[ 22.234] (II) XINPUT: Adding extended input device “Sleep Button” (type: KEYBOARD, id 7)
[ 22.234] () Option “xkb_rules” “evdev”
[ 22.235] () Option “xkb_model” “pc105”
[ 22.235] () Option “xkb_layout” “fr”
[ 22.235] () Option “xkb_variant” “latin9”
[ 22.236] (II) config/udev: Adding input device USB Keyboard (/dev/input/event0)
[ 22.236] () USB Keyboard: Applying InputClass “evdev keyboard catchall”
[ 22.236] (II) Using input driver ‘evdev’ for ’ USB Keyboard’
[ 22.236] () USB Keyboard: always reports core events
[ 22.236] () evdev: USB Keyboard: Device: “/dev/input/event0”
[ 22.236] (–) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503
[ 22.236] (–) evdev: USB Keyboard: Found keys
[ 22.236] (II) evdev: USB Keyboard: Configuring as keyboard
[ 22.236] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input0/event0”
[ 22.236] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 8)
[ 22.236] () Option “xkb_rules” “evdev”
[ 22.236] () Option “xkb_model” “pc105”
[ 22.236] () Option “xkb_layout” “fr”
[ 22.236] () Option “xkb_variant” “latin9”
[ 22.237] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1)
[ 22.237] () USB Keyboard: Applying InputClass “evdev keyboard catchall”
[ 22.237] (II) Using input driver ‘evdev’ for ’ USB Keyboard’
[ 22.237] () USB Keyboard: always reports core events
[ 22.237] () evdev: USB Keyboard: Device: “/dev/input/event1”
[ 22.237] (–) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503
[ 22.237] (–) evdev: USB Keyboard: Found keys
[ 22.237] (II) evdev: USB Keyboard: Configuring as keyboard
[ 22.237] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/input/input1/event1”
[ 22.237] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9)
[ 22.237] () Option “xkb_rules” “evdev”
[ 22.237] () Option “xkb_model” “pc105”
[ 22.237] () Option “xkb_layout” “fr”
[ 22.237] () Option “xkb_variant” “latin9”
[ 22.238] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
[ 22.238] () USB Optical Mouse: Applying InputClass “evdev pointer catchall”
[ 22.238] (II) Using input driver ‘evdev’ for ‘USB Optical Mouse’
[ 22.238] () USB Optical Mouse: always reports core events
[ 22.238] () evdev: USB Optical Mouse: Device: “/dev/input/event2”
[ 22.238] (–) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d22
[ 22.238] (–) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 22.238] (–) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 22.238] (–) evdev: USB Optical Mouse: Found relative axes
[ 22.238] (–) evdev: USB Optical Mouse: Found x and y relative axes
[ 22.238] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 22.238] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 22.239] () evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 22.239] () evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.239] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input2/event2”
[ 22.239] (II) XINPUT: Adding extended input device “USB Optical Mouse” (type: MOUSE, id 10)
[ 22.239] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 22.239] () USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 22.239] () USB Optical Mouse: (accel) acceleration profile 0
[ 22.239] () USB Optical Mouse: (accel) acceleration factor: 2.000
[ 22.239] () USB Optical Mouse: (accel) acceleration threshold: 4
[ 22.239] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 22.240] (II) No input driver specified, ignoring this device.
[ 22.240] (II) This device may have been added with another device file.
[ 22.240] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event3)
[ 22.240] () American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass “evdev keyboard catchall”
[ 22.240] (II) Using input driver ‘evdev’ for ‘American Megatrends Inc. Virtual Keyboard and Mouse’
[ 22.240] () American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events
[ 22.240] () evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: “/dev/input/event3”
[ 22.240] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Vendor 0x46b Product 0xff10
[ 22.240] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found keys
[ 22.240] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Configuring as keyboard
[ 22.240] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3/event3”
[ 22.240] (II) XINPUT: Adding extended input device “American Megatrends Inc. Virtual Keyboard and Mouse” (type: KEYBOARD, id 11)
[ 22.240] () Option “xkb_rules” “evdev”
[ 22.240] () Option “xkb_model” “pc105”
[ 22.240] () Option “xkb_layout” “fr”
[ 22.241] () Option “xkb_variant” “latin9”
[ 22.241] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/event4)
[ 22.242] () American Megatrends Inc. Virtual Keyboard and Mouse: Applying InputClass “evdev pointer catchall”
[ 22.242] (II) Using input driver ‘evdev’ for ‘American Megatrends Inc. Virtual Keyboard and Mouse’
[ 22.242] () American Megatrends Inc. Virtual Keyboard and Mouse: always reports core events
[ 22.242] () evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Device: “/dev/input/event4”
[ 22.242] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Vendor 0x46b Product 0xff10
[ 22.242] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found 3 mouse buttons
[ 22.242] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found scroll wheel(s)
[ 22.242] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found relative axes
[ 22.242] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found absolute axes
[ 22.242] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found x and y absolute axes
[ 22.242] (–) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Found absolute touchscreen
[ 22.242] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Configuring as touchscreen
[ 22.242] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: Adding scrollwheel support
[ 22.242] () evdev: American Megatrends Inc. Virtual Keyboard and Mouse: YAxisMapping: buttons 4 and 5
[ 22.242] () evdev: American Megatrends Inc. Virtual Keyboard and Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.242] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input4/event4”
[ 22.242] (II) XINPUT: Adding extended input device “American Megatrends Inc. Virtual Keyboard and Mouse” (type: TOUCHSCREEN, id 12)
[ 22.242] (WW) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: touchpads, tablets and touchscreens ignore relative axes.
[ 22.242] (II) evdev: American Megatrends Inc. Virtual Keyboard and Mouse: initialized for absolute axes.
[ 22.242] () American Megatrends Inc. Virtual Keyboard and Mouse: (accel) keeping acceleration scheme 1
[ 22.242] () American Megatrends Inc. Virtual Keyboard and Mouse: (accel) acceleration profile 0
[ 22.242] () American Megatrends Inc. Virtual Keyboard and Mouse: (accel) acceleration factor: 2.000
[ 22.242] () American Megatrends Inc. Virtual Keyboard and Mouse: (accel) acceleration threshold: 4
[ 22.243] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/js0)
[ 22.243] (II) No input driver specified, ignoring this device.
[ 22.243] (II) This device may have been added with another device file.
[ 22.243] (II) config/udev: Adding input device American Megatrends Inc. Virtual Keyboard and Mouse (/dev/input/mouse1)
[ 22.243] (II) No input driver specified, ignoring this device.
[ 22.243] (II) This device may have been added with another device file.
[ 22.244] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 22.244] (II) No input driver specified, ignoring this device.
[ 22.244] (II) This device may have been added with another device file.
[ 5288.792] (II) config/udev: removing device USB Optical Mouse
[ 5288.792] (II) evdev: USB Optical Mouse: Close
[ 5288.792] (II) UnloadModule: “evdev”
[ 5289.171] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 5289.172] (II) No input driver specified, ignoring this device.
[ 5289.172] (II) This device may have been added with another device file.
[ 5289.172] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
[ 5289.172] () USB Optical Mouse: Applying InputClass “evdev pointer catchall”
[ 5289.172] (II) Using input driver ‘evdev’ for ‘USB Optical Mouse’
[ 5289.172] () USB Optical Mouse: always reports core events
[ 5289.172] () evdev: USB Optical Mouse: Device: “/dev/input/event2”
[ 5289.176] (–) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d22
[ 5289.176] (–) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 5289.176] (–) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 5289.176] (–) evdev: USB Optical Mouse: Found relative axes
[ 5289.176] (–) evdev: USB Optical Mouse: Found x and y relative axes
[ 5289.176] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 5289.176] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 5289.176] () evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 5289.176] () evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5289.176] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8/event2”
[ 5289.176] (II) XINPUT: Adding extended input device “USB Optical Mouse” (type: MOUSE, id 10)
[ 5289.176] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 5289.177] () USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 5289.177] () USB Optical Mouse: (accel) acceleration profile 0
[ 5289.177] () USB Optical Mouse: (accel) acceleration factor: 2.000
[ 5289.177] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[/code]

#28

On dirait que c’est bel et bien ton pilote MGA qui est actif. Donc pas certain que tu puisses faire mieux à l’égard de ton driver.

En quoi est-il insatisfaisant hormis qu’il ne démarre pas bien Gnome 3 ? Résolution trop faible ? Peu réactif ?

Ta machine est peut-être un peu vieille aussi.

#29

Vieille je ne sais pas: http://www.intel.com/support/fr/motherboards/server/s3420gp/sb/CS-030742.htm
Pour installer xfe il faut d’abord désinstaller Gnome?

#30

Non, les 2 peuvent s’installer en parallèle.

XFCE te remplacera peut-être GDM par LightDM (que je n’aime pas, perso, lui préférant SLIM)

#31

Merci pour ton aide

#32

Aux dernières nouvelles, Xfce est resté léger et non contraigant. Ca m’étonnerait que le projet se mette à dépendre d’un DM en particulier.
Le paquet xfce4 installe le minimum. Pour avoir un environnement un peu plus complet, xfce4-goodies est un must (terminal,bloc-note,gestion de l’energie,…).