Bonjour,
Le fichier /dev/video0 et le répertoire /dev/v4l ont disparu et je n’arrive pas à les récréer.
Comment faut-il procéder ?
Cordialement
Je crois que le fichier /dev/video0 (et suppose l’autre fichier aussi) se crée automatiquement lorsque tu branches un matériel comme une webcam.
Non, puisque j’ai déjà essayé.
Si /dev/v4l n’existe pas, il n’y aura pas de création de /dev/video0, ou 1 ou 2 etc…
As-tu un bouton type Fn+icône pour dés(activer) ta webcam ?
Chez moi je n’ai effectivement pas ces répertoires si je désactive la cam par ce moyen.
Non, je n’ai aucun bouton pour désactiver la webcam.
Je pense qu’il faut chercher ailleurs.
J’ai essayé d’installer des pilotes pour une clé TNT usb, en faisant ceci :
git clone git://linuxtv.org/media_build.git
cd media_build
./build
mais cela n’a pas fonctionné, j’ai eu des messages d’erreur.
Le noyau est le 3.2.0.59, peut-être est-il en cause ?
Vérifie avant le branchement de ton usb et après le branchement, si les fichiers sont là.
J’ai déjà fait cette manipulation, je viens de la refaire pour vous en convaincre; bien sûr, aucun des fichiers ni répertoires absents ne sont revenus. Il ne faut pas rêver, ni croire aux miracles.
Si des gens compétents pouvaient répondre, je leur en serais reconnaissant.
Cordialement.
Balance ces infos:
Après avoir débranché / rebranché ton périphérique:
Ainsi que:
Voilà les réponses :
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-59-generic (buildd@toyol) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #90-Ubuntu SMP Tue Jan 7 22:43:51 UTC 2014 (Ubuntu 3.2.0-59.90-generic 3.2.54)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=740a0eee-9678-4a18-aaef-c24fdc0525bc ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff9e000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: MSI MS-7641/760GM-P34(FX) (MS-7641) , BIOS V17.15 04/28/2013
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ cff8e000-cff90000
[ 0.000000] RAMDISK: 364be000 - 37257000
[ 0.000000] ACPI: RSDP 00000000000f8d00 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000cff90000 0003C (v01 7641MS A7641100 20130428 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90200 00084 (v01 7641MS A7641100 20130428 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560)
[ 0.000000] ACPI: DSDT 00000000cff90660 09DF0 (v01 A7641 A7641100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cff9e000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0010C (v01 7641MS A7641100 20130428 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff904a0 0003C (v01 7641MS OEMMCFG 20130428 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff9e040 00072 (v01 7641MS A7641100 20130428 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff9a660 00038 (v01 7641MS OEMHPET 20130428 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9a6a0 008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [000000021fffb000 - 000000021fffffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217a00000-ffff88021f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 2031391
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831440 pages, LIFO batch:31
[ 0.000000] Normal zone: 18432 pages used for memmap
[ 0.000000] Normal zone: 1161216 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 24 CPUs, 20 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cff9e000
[ 0.000000] PM: Registered nosave memory: 00000000cff9e000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fe00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:24 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880217600000 s83136 r8192 d23360 u131072
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 -- -- -- -- -- -- -- --
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1996570
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-59-generic root=UUID=740a0eee-9678-4a18-aaef-c24fdc0525bc ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 7834556k/8912896k available (6592k kernel code, 787332k absent, 291008k reserved, 6614k data, 924k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:872 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 65011712 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3399.637 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.27 BogoMIPS (lpj=13598548)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004041] Security Framework initialized
[ 0.004051] AppArmor: AppArmor initialized
[ 0.004053] Yama: becoming mindful.
[ 0.004513] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006688] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008403] Mount-cache hash table entries: 256
[ 0.008536] Initializing cgroup subsys cpuacct
[ 0.008544] Initializing cgroup subsys memory
[ 0.008555] Initializing cgroup subsys devices
[ 0.008556] Initializing cgroup subsys freezer
[ 0.008558] Initializing cgroup subsys blkio
[ 0.008563] Initializing cgroup subsys perf_event
[ 0.008590] tseg: 0000000000
[ 0.008602] CPU: Physical Processor ID: 0
[ 0.008603] CPU: Processor Core ID: 0
[ 0.008605] mce: CPU supports 6 MCE banks
[ 0.008612] using AMD E400 aware idle routine
[ 0.009737] ACPI: Core revision 20110623
[ 0.012012] ftrace: allocating 26602 entries in 105 pages
[ 0.016064] Switched APIC routing to physical flat.
[ 0.016409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056462] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148038] System has AMD C1E enabled
[ 0.148040] Switch to broadcast mode on CPU1
[ 0.148084] #2
[ 0.148085] smpboot cpu 2: start_ip = 9a000
[ 0.240033] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240046] Switch to broadcast mode on CPU2
[ 0.240086] #3
[ 0.240087] smpboot cpu 3: start_ip = 9a000
[ 0.332044] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332058] Brought up 4 CPUs
[ 0.332060] Total of 4 processors activated (27199.36 BogoMIPS).
[ 0.332057] Switch to broadcast mode on CPU3
[ 0.336147] Switch to broadcast mode on CPU0
[ 0.336183] devtmpfs: initialized
[ 0.336923] EVM: security.selinux
[ 0.336924] EVM: security.SMACK64
[ 0.336925] EVM: security.capability
[ 0.337025] PM: Registering ACPI NVS region at cff9e000 (270336 bytes)
[ 0.337025] print_constraints: dummy:
[ 0.337025] RTC time: 21:18:18, date: 04/29/14
[ 0.337025] NET: Registered protocol family 16
[ 0.337025] node 0 link 0: io port [1000, ffffff]
[ 0.337025] TOM: 00000000d0000000 aka 3328M
[ 0.337025] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.337025] node 0 link 0: mmio [a0000, bffff]
[ 0.337025] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.337025] node 0 link 0: mmio [f0000000, fe9fffff]
[ 0.337025] node 0 link 0: mmio [fea00000, febfffff]
[ 0.337025] node 0 link 0: mmio [fec00000, ffdfffff]
[ 0.337025] TOM2: 0000000230000000 aka 8960M
[ 0.337025] bus: [00, 1f] on node 0 link 0
[ 0.337025] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.337025] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.337025] bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
[ 0.337025] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
[ 0.337025] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.337025] Extended Config Space enabled on 1 nodes
[ 0.337025] ACPI: bus type pci registered
[ 0.337025] Trying to unpack rootfs image as initramfs...
[ 0.337025] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.337025] PCI: not using MMCONFIG
[ 0.337025] PCI: Using configuration type 1 for base access
[ 0.337025] PCI: Using configuration type 1 for extended access
[ 0.337523] bio: create slab <bio-0> at 0
[ 0.337523] ACPI: Added _OSI(Module Device)
[ 0.337523] ACPI: Added _OSI(Processor Device)
[ 0.337523] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.337523] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.337523] ACPI: EC: Look up EC in DSDT
[ 0.340723] ACPI: Executed 4 blocks of module-level executable AML code
[ 0.342983] ACPI: Interpreter enabled
[ 0.342986] ACPI: (supports S0 S1 S4 S5)
[ 0.342999] ACPI: Using IOAPIC for interrupt routing
[ 0.343012] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.343521] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.520785] Freeing initrd memory: 13924k freed
[ 0.532761] ACPI: No dock devices found.
[ 0.532764] HEST: Table not found.
[ 0.532767] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.532824] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.532928] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.532929] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.532931] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.532933] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.532934] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff]
[ 0.532936] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.532947] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[ 0.532989] pci 0000:00:01.0: [1022:9602] type 1 class 0x000604
[ 0.533020] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[ 0.533049] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.533052] pci 0000:00:05.0: PME# disabled
[ 0.533092] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 0.533110] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.533119] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.533128] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.533137] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.533145] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.533154] pci 0000:00:11.0: reg 24: [mem 0xfe9ffc00-0xfe9fffff]
[ 0.533174] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.533217] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.533230] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.533291] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[ 0.533304] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.533372] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.533390] pci 0000:00:12.2: reg 10: [mem 0xfe9ff800-0xfe9ff8ff]
[ 0.533468] pci 0000:00:12.2: supports D1 D2
[ 0.533469] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.533473] pci 0000:00:12.2: PME# disabled
[ 0.533492] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.533504] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.533565] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[ 0.533577] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.533644] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.533661] pci 0000:00:13.2: reg 10: [mem 0xfe9ff400-0xfe9ff4ff]
[ 0.533740] pci 0000:00:13.2: supports D1 D2
[ 0.533741] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.533744] pci 0000:00:13.2: PME# disabled
[ 0.533766] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.533860] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 0.533875] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.533884] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.533893] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.533902] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.533910] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.533965] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.533985] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.534048] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.534051] pci 0000:00:14.2: PME# disabled
[ 0.534063] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.534136] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.534175] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.534187] pci 0000:00:14.5: reg 10: [mem 0xfe9fa000-0xfe9fafff]
[ 0.534250] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.534263] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.534273] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.534283] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.534295] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.534335] pci 0000:01:05.0: [1002:9616] type 0 class 0x000300
[ 0.534342] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.534346] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff]
[ 0.534350] pci 0000:01:05.0: reg 18: [mem 0xfebe0000-0xfebeffff]
[ 0.534358] pci 0000:01:05.0: reg 24: [mem 0xfea00000-0xfeafffff]
[ 0.534373] pci 0000:01:05.0: supports D1 D2
[ 0.534412] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.534415] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.534417] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
[ 0.534419] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.534452] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.534464] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.534483] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.534496] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.534546] pci 0000:02:00.0: supports D1 D2
[ 0.534547] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.534551] pci 0000:02:00.0: PME# disabled
[ 0.540069] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.540074] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.540077] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.540137] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.540146] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.540147] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.540149] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.540151] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.540152] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.540154] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.540166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.540286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.540309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.540339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.540367] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.540369] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.540371] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.543096] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 0.543123] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *11 12 14 15)
[ 0.543147] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.543172] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.543195] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.543219] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.543242] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
[ 0.543266] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.543345] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.543345] vgaarb: loaded
[ 0.543345] vgaarb: bridge control possible 0000:01:05.0
[ 0.543345] i2c-core: driver [aat2870] using legacy suspend method
[ 0.543345] i2c-core: driver [aat2870] using legacy resume method
[ 0.543345] SCSI subsystem initialized
[ 0.543345] libata version 3.00 loaded.
[ 0.543345] usbcore: registered new interface driver usbfs
[ 0.543345] usbcore: registered new interface driver hub
[ 0.543345] usbcore: registered new device driver usb
[ 0.543345] PCI: Using ACPI for IRQ routing
[ 0.551886] PCI: pci_cache_line_size set to 64 bytes
[ 0.551942] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.551944] reserve RAM buffer: 00000000cff90000 - 00000000cfffffff
[ 0.552018] NetLabel: Initializing
[ 0.552019] NetLabel: domain hash size = 128
[ 0.552020] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.552028] NetLabel: unlabeled traffic allowed by default
[ 0.552069] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.552069] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.554085] Switching to clocksource hpet
[ 0.556570] AppArmor: AppArmor Filesystem Enabled
[ 0.556586] pnp: PnP ACPI init
[ 0.556595] ACPI: bus type pnp registered
[ 0.556667] pnp 00:00: [bus 00-ff]
[ 0.556669] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.556671] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.556672] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.556674] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.556675] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.556677] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.556678] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.556722] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.556771] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.556773] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.556805] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.556833] pnp 00:02: [dma 4]
[ 0.556835] pnp 00:02: [io 0x0000-0x000f]
[ 0.556836] pnp 00:02: [io 0x0081-0x0083]
[ 0.556837] pnp 00:02: [io 0x0087]
[ 0.556839] pnp 00:02: [io 0x0089-0x008b]
[ 0.556840] pnp 00:02: [io 0x008f]
[ 0.556843] pnp 00:02: [io 0x00c0-0x00df]
[ 0.556864] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.556870] pnp 00:03: [io 0x0070-0x0071]
[ 0.556881] pnp 00:03: [irq 8]
[ 0.556901] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.556906] pnp 00:04: [io 0x0061]
[ 0.556924] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.556929] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.556935] pnp 00:05: [irq 13]
[ 0.556955] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.557097] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.557101] pnp 00:06: [irq 4]
[ 0.557102] pnp 00:06: [dma 0 disabled]
[ 0.557145] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.557318] pnp 00:07: [io 0x0378-0x037f]
[ 0.557321] pnp 00:07: [irq 7]
[ 0.557323] pnp 00:07: [dma 0 disabled]
[ 0.557398] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.557412] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.557433] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.557475] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.557476] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.557508] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.557510] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.557512] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.557586] pnp 00:0a: [io 0x0010-0x001f]
[ 0.557588] pnp 00:0a: [io 0x0022-0x003f]
[ 0.557589] pnp 00:0a: [io 0x0062-0x0063]
[ 0.557592] pnp 00:0a: [io 0x0065-0x006f]
[ 0.557593] pnp 00:0a: [io 0x0072-0x007f]
[ 0.557594] pnp 00:0a: [io 0x0080]
[ 0.557595] pnp 00:0a: [io 0x0084-0x0086]
[ 0.557596] pnp 00:0a: [io 0x0088]
[ 0.557598] pnp 00:0a: [io 0x008c-0x008e]
[ 0.557599] pnp 00:0a: [io 0x0090-0x009f]
[ 0.557600] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.557601] pnp 00:0a: [io 0x00b1]
[ 0.557602] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.557604] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.557605] pnp 00:0a: [io 0x040b]
[ 0.557606] pnp 00:0a: [io 0x04d6]
[ 0.557607] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.557608] pnp 00:0a: [io 0x0c14]
[ 0.557610] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.557611] pnp 00:0a: [io 0x0c52]
[ 0.557612] pnp 00:0a: [io 0x0c6c]
[ 0.557613] pnp 00:0a: [io 0x0c6f]
[ 0.557614] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.557615] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.557617] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.557618] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.557619] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.557620] pnp 00:0a: [io 0x0800-0x089f]
[ 0.557622] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.557623] pnp 00:0a: [io 0x0b00-0x0b0f]
[ 0.557624] pnp 00:0a: [io 0x0b20-0x0b3f]
[ 0.557626] pnp 00:0a: [io 0x0900-0x090f]
[ 0.557627] pnp 00:0a: [io 0x0910-0x091f]
[ 0.557628] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.557629] pnp 00:0a: [io 0x0060-0x005f disabled]
[ 0.557631] pnp 00:0a: [io 0x0064-0x0063 disabled]
[ 0.557632] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.557634] pnp 00:0a: [mem 0xfec10000-0xfec1001f]
[ 0.557687] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.557689] system 00:0a: [io 0x040b] has been reserved
[ 0.557692] system 00:0a: [io 0x04d6] has been reserved
[ 0.557693] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.557695] system 00:0a: [io 0x0c14] has been reserved
[ 0.557696] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.557698] system 00:0a: [io 0x0c52] has been reserved
[ 0.557700] system 00:0a: [io 0x0c6c] has been reserved
[ 0.557701] system 00:0a: [io 0x0c6f] has been reserved
[ 0.557703] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.557704] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.557706] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.557708] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.557709] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.557711] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.557712] system 00:0a: [io 0x0b00-0x0b0f] has been reserved
[ 0.557714] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.557716] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.557717] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.557719] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.557721] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.557723] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.557725] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.557739] pnp 00:0b: [io 0x0060]
[ 0.557741] pnp 00:0b: [io 0x0064]
[ 0.557744] pnp 00:0b: [irq 1]
[ 0.557769] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.557799] pnp 00:0c: [irq 12]
[ 0.557824] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.557873] pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
[ 0.557875] pnp 00:0d: [io 0x0e80-0x0f5f]
[ 0.557876] pnp 00:0d: [io 0x0ae0-0x0aef]
[ 0.557908] system 00:0d: [io 0x0e80-0x0f5f] has been reserved
[ 0.557910] system 00:0d: [io 0x0ae0-0x0aef] has been reserved
[ 0.557912] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.557938] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[ 0.557971] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.557973] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.558494] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.558496] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.558497] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.558499] pnp 00:0f: [mem 0x00100000-0xcfffffff]
[ 0.558500] pnp 00:0f: [mem 0xfec00000-0xffffffff]
[ 0.558538] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.558540] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.558542] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.558544] system 00:0f: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.558546] system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.558548] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.558612] pnp: PnP ACPI: found 16 devices
[ 0.558614] ACPI: ACPI bus type pnp unregistered
[ 0.565378] PCI: max bus depth: 1 pci_try_num: 2
[ 0.565391] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.565394] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.565396] pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfebfffff]
[ 0.565398] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.565401] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.565403] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
[ 0.565406] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.565409] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.565431] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.565434] pci 0000:00:05.0: setting latency timer to 64
[ 0.565440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.565442] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.565443] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.565445] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.565447] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.565448] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.565450] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.565452] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfebfffff]
[ 0.565453] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.565455] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.565457] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.565459] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.565461] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.565462] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.565464] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.565466] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.565467] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.565503] NET: Registered protocol family 2
[ 0.565668] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.566623] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.568764] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.569028] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.569029] TCP reno registered
[ 0.569041] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.569087] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.569243] NET: Registered protocol family 1
[ 0.569253] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
[ 0.569283] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.652059] pci 0000:00:12.0: PCI INT A disabled
[ 0.652068] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.732055] pci 0000:00:12.1: PCI INT A disabled
[ 0.732066] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.732111] pci 0000:00:12.2: PCI INT B disabled
[ 0.732124] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.812053] pci 0000:00:13.0: PCI INT A disabled
[ 0.812063] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.892058] pci 0000:00:13.1: PCI INT A disabled
[ 0.892074] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.892118] pci 0000:00:13.2: PCI INT B disabled
[ 0.892133] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.972057] pci 0000:00:14.5: PCI INT C disabled
[ 0.972071] pci 0000:01:05.0: Boot video device
[ 0.972075] PCI: CLS 64 bytes, default 64
[ 0.972276] PCI-DMA: Disabling AGP.
[ 0.972371] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.972372] PCI-DMA: using GART IOMMU.
[ 0.972375] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.975728] IBS: LVT offset 1 assigned
[ 0.975745] perf: AMD IBS detected (0x0000001f)
[ 0.975908] audit: initializing netlink socket (disabled)
[ 0.975925] type=2000 audit(1398806298.968:1): initialized
[ 0.991736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.993596] VFS: Disk quotas dquot_6.5.2
[ 0.993638] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.994057] fuse init (API version 7.17)
[ 0.994131] msgmni has been set to 15457
[ 0.994576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.994614] io scheduler noop registered
[ 0.994615] io scheduler deadline registered
[ 0.994636] io scheduler cfq registered (default)
[ 0.994740] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.994766] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.994834] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.994846] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.994942] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.994946] ACPI: Power Button [PWRB]
[ 0.994974] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.994977] ACPI: Power Button [PWRF]
[ 0.995027] ACPI: processor limited to max C-state 1
[ 1.192269] ERST: Table is not found!
[ 1.192271] GHES: HEST is not enabled!
[ 1.192351] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.212793] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.280765] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.281072] Linux agpgart interface v0.103
[ 1.282288] brd: module loaded
[ 1.282934] loop: module loaded
[ 1.283044] ahci 0000:00:11.0: version 3.0
[ 1.283064] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.283170] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.283173] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.283596] scsi0 : ahci
[ 1.283661] scsi1 : ahci
[ 1.283715] scsi2 : ahci
[ 1.283771] scsi3 : ahci
[ 1.283838] ata1: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd00 irq 22
[ 1.283841] ata2: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffd80 irq 22
[ 1.283844] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
[ 1.283847] ata4: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe80 irq 22
[ 1.283958] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.283984] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.284241] Fixed MDIO Bus: probed
[ 1.284253] tun: Universal TUN/TAP device driver, 1.6
[ 1.284255] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.284302] PPP generic driver version 2.4.2
[ 1.284378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.284397] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.284409] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.284448] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.284455] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.284477] ehci_hcd 0000:00:12.2: debug port 1
[ 1.284495] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff800
[ 1.296053] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.296179] hub 1-0:1.0: USB hub found
[ 1.296182] hub 1-0:1.0: 6 ports detected
[ 1.296264] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.296278] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.296315] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.296321] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.296339] ehci_hcd 0000:00:13.2: debug port 1
[ 1.296357] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9ff400
[ 1.308055] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.308145] hub 2-0:1.0: USB hub found
[ 1.308148] hub 2-0:1.0: 6 ports detected
[ 1.308226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.308247] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.308261] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.308297] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.308318] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 1.368153] hub 3-0:1.0: USB hub found
[ 1.368170] hub 3-0:1.0: 3 ports detected
[ 1.368243] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.368256] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.368298] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.368312] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 1.428146] hub 4-0:1.0: USB hub found
[ 1.428159] hub 4-0:1.0: 3 ports detected
[ 1.428232] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.428244] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.428283] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.428303] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 1.488138] hub 5-0:1.0: USB hub found
[ 1.488150] hub 5-0:1.0: 3 ports detected
[ 1.488217] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.488230] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.488270] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.488285] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 1.548163] hub 6-0:1.0: USB hub found
[ 1.548178] hub 6-0:1.0: 3 ports detected
[ 1.548250] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.548262] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.548302] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.548316] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9fa000
[ 1.604102] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.608163] hub 7-0:1.0: USB hub found
[ 1.608172] hub 7-0:1.0: 2 ports detected
[ 1.608224] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.608272] usbcore: registered new interface driver libusual
[ 1.608301] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.608676] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.608680] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.608762] mousedev: PS/2 mouse device common for all mice
[ 1.608887] rtc_cmos 00:03: RTC can wake from S4
[ 1.608973] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.608996] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.609054] device-mapper: uevent: version 1.0.3
[ 1.609103] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.609108] cpuidle: using governor ladder
[ 1.609110] cpuidle: using governor menu
[ 1.609111] EFI Variables Facility v0.08 2004-May-17
[ 1.609254] TCP cubic registered
[ 1.609318] NET: Registered protocol family 10
[ 1.609675] NET: Registered protocol family 17
[ 1.609678] Registering the dns_resolver key type
[ 1.609788] PM: Hibernation image not present or could not be loaded.
[ 1.609795] registered taskstats version 1
[ 1.614658] Magic number: 10:666:349
[ 1.614748] rtc_cmos 00:03: setting system clock to 2014-04-29 21:18:20 UTC (1398806300)
[ 1.614763] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor (4 cpu cores) (version 2.20.00)
[ 1.614796] powernow-k8: 0 : pstate 0 (3400 MHz)
[ 1.614797] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 1.614798] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 1.614799] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.615086] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.615088] EDD information not available.
[ 1.626636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.720056] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 1.772065] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.772945] ata1.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
[ 1.772947] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.774585] ata1.00: configured for UDMA/133
[ 1.774758] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
[ 1.774875] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.774882] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.774885] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.774978] sd 0:0:0:0: [sda] Write Protect is off
[ 1.774980] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.775016] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.776090] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.776115] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.778350] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB01, max UDMA/100
[ 1.778792] ata3.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN01, max UDMA/133
[ 1.779159] ata2.00: configured for UDMA/100
[ 1.780303] ata3.00: configured for UDMA/133
[ 1.780570] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-224DB SB01 PQ: 0 ANSI: 5
[ 1.783455] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.783457] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.783564] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.783633] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.786224] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NS95 RN01 PQ: 0 ANSI: 5
[ 1.789145] sr1: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.789236] sr 2:0:0:0: Attached scsi CD-ROM sr1
[ 1.789306] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.875129] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
[ 1.875759] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.876758] Freeing unused kernel memory: 924k freed
[ 1.876946] Write protecting the kernel read-only data: 12288k
[ 1.880515] Freeing unused kernel memory: 1580k freed
[ 1.883501] Freeing unused kernel memory: 1188k freed
[ 1.895902] udevd[103]: starting version 175
[ 1.911311] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.911335] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.911388] r8169 0000:02:00.0: setting latency timer to 64
[ 1.911446] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1.911793] r8169 0000:02:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, d4:3d:7e:9c:bf:41, XID 0c900800 IRQ 41
[ 1.911795] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.919045] scsi4 : pata_atiixp
[ 1.919123] scsi5 : pata_atiixp
[ 1.919536] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.919538] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.976058] Refined TSC clocksource calibration: 3400.014 MHz.
[ 1.976063] Switching to clocksource tsc
[ 2.008044] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 2.408035] usb 3-1: new full-speed USB device number 2 using ohci_hcd
[ 2.571060] usb 3-1: not running at top speed; connect to a high speed hub
[ 2.586102] Initializing USB Mass Storage driver...
[ 2.586196] scsi6 : usb-storage 3-1:1.0
[ 2.586249] usbcore: registered new interface driver usb-storage
[ 2.586250] USB Mass Storage support registered.
[ 3.339770] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.591077] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 3.591513] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.611068] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 13.908514] Adding 1953788k swap on /dev/sda5. Priority:-1 extents:1 across:1953788k
[ 13.911490] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.926660] udevd[404]: starting version 175
[ 13.947239] lp: driver loaded but no devices found
[ 13.985842] wmi: Mapper loaded
[ 13.988537] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.999244] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
[ 13.999247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 13.999979] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 14.000134] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 14.014549] [drm] Initialized drm 1.1.0 20060810
[ 14.020435] parport_pc 00:07: reported by Plug and Play ACPI
[ 14.020490] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 14.027603] MCE: In-kernel MCE decoding enabled.
[ 14.028043] EDAC MC: Ver: 2.1.0
[ 14.029391] AMD64 EDAC driver v3.4.0
[ 14.029420] EDAC amd64: DRAM ECC disabled.
[ 14.029426] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 14.029427] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 14.029428] (Note that use of the override may cause unknown side effects.)
[ 14.035452] WARNING: You are using an experimental version of the media stack.
[ 14.035453] As the driver is backported to an older kernel, it doesn't offer
[ 14.035454] enough quality for its usage in production.
[ 14.035455] Use it with care.
[ 14.035455] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 14.035456] 393cbd8dc532c1ebed60719da8d379f50d445f28 [media] smiapp: Use %u for printing u32 value
[ 14.035457] f5d65070d49f707a06bf00c147f02848659a6a0b [media] smiapp: Define macros for obtaining properties of register definitions
[ 14.035458] 6f7481b6685daf693e995e8653f6c8d27cfe5bfc [media] smiapp: Add register diversion quirk
[ 14.036205] WARNING: You are using an experimental version of the media stack.
[ 14.036206] As the driver is backported to an older kernel, it doesn't offer
[ 14.036207] enough quality for its usage in production.
[ 14.036207] Use it with care.
[ 14.036208] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 14.036208] 393cbd8dc532c1ebed60719da8d379f50d445f28 [media] smiapp: Use %u for printing u32 value
[ 14.036209] f5d65070d49f707a06bf00c147f02848659a6a0b [media] smiapp: Define macros for obtaining properties of register definitions
[ 14.036210] 6f7481b6685daf693e995e8653f6c8d27cfe5bfc [media] smiapp: Add register diversion quirk
[ 14.039320] usb 1-6: dvb_usb_af9035: prechip_version=83 chip_version=02 chip_type=9135
[ 14.039789] usb 1-6: dvb_usb_v2: found a 'Avermedia A835B(3835)' in warm state
[ 14.042675] usb 1-6: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 14.042724] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.042781] DVB: registering new adapter (Avermedia A835B(3835))
[ 14.044535] [drm] radeon defaulting to kernel modesetting.
[ 14.044537] [drm] radeon kernel modesetting enabled.
[ 14.044600] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.044604] radeon 0000:01:05.0: setting latency timer to 64
[ 14.044742] [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1462:0x7641).
[ 14.044771] [drm] register mmio base: 0xFEBE0000
[ 14.044773] [drm] register mmio size: 65536
[ 14.045445] ATOM BIOS: B43106
[ 14.045466] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
[ 14.045468] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[ 14.049697] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.049700] [drm] RAM width 32bits DDR
[ 14.050659] i2c i2c-0: af9033: firmware version: LINK=0.0.0.0 OFDM=3.9.1.0
[ 14.050663] usb 1-6: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 14.051209] [TTM] Zone kernel: Available graphics memory: 3959062 kiB.
[ 14.051211] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 14.051212] [TTM] Initializing pool allocator.
[ 14.051228] [drm] radeon: 256M of VRAM memory ready
[ 14.051230] [drm] radeon: 512M of GTT memory ready.
[ 14.051247] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.052924] [drm] Loading RS780 Microcode
[ 14.056399] i2c i2c-0: tuner_it913x: ITE Tech IT913X successfully attached
[ 14.080311] hda_codec: ALC887-VD: BIOS auto-probing.
[ 14.087914] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 14.093978] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 14.094090] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 14.094465] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 14.095161] input: HDA ATI SB Line-Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 14.101043] ppdev: user-space parallel port driver
[ 14.104148] Registered IR keymap rc-it913x-v2
[ 14.104269] input: Avermedia A835B(3835) as /devices/pci0000:00/0000:00:12.2/usb1/1-6/rc/rc0/input8
[ 14.104400] rc0: Avermedia A835B(3835) as /devices/pci0000:00/0000:00:12.2/usb1/1-6/rc/rc0
[ 14.104404] usb 1-6: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 14.104407] usb 1-6: dvb_usb_v2: 'Avermedia A835B(3835)' successfully initialized and connected
[ 14.104434] usbcore: registered new interface driver dvb_usb_af9035
[ 14.104622] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[ 14.104699] radeon 0000:01:05.0: WB enabled
[ 14.104702] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.104703] [drm] Driver supports precise vblank timestamp query.
[ 14.104721] [drm] radeon: irq initialized.
[ 14.116155] lp0: using parport0 (interrupt-driven).
[ 14.136649] [drm] ring test succeeded in 1 usecs
[ 14.136716] [drm] radeon: ib pool ready.
[ 14.136767] [drm] ib test succeeded in 0 usecs
[ 14.137019] [drm] Radeon Display Connectors
[ 14.137020] [drm] Connector 0:
[ 14.137021] [drm] VGA
[ 14.137023] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 14.137024] [drm] Encoders:
[ 14.137025] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.137026] [drm] Connector 1:
[ 14.137027] [drm] HDMI-A
[ 14.137028] [drm] HPD3
[ 14.137030] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 14.137031] [drm] Encoders:
[ 14.137032] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
[ 14.137051] [drm] radeon: power management initialized
[ 14.206338] [drm] fb mappable at 0xD0142000
[ 14.206340] [drm] vram apper at 0xD0000000
[ 14.206341] [drm] size 5242880
[ 14.206342] [drm] fb depth is 24
[ 14.206343] [drm] pitch is 5120
[ 14.206422] fbcon: radeondrmfb (fb0) is primary device
[ 14.206525] Console: switching to colour frame buffer device 160x64
[ 14.206544] fb0: radeondrmfb frame buffer device
[ 14.206546] drm: registered panic notifier
[ 14.206550] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0
[ 14.216813] 3:3:1: cannot get freq at ep 0x84
[ 14.225549] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[ 14.225552] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1
[ 14.225705] usbcore: registered new interface driver snd-usb-audio
[ 14.672050] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 14.961506] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 15.046986] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 15.335785] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input9
[ 15.652783] init: failsafe main process (869) killed by TERM signal
[ 15.927326] Bluetooth: Core ver 2.16
[ 15.927412] NET: Registered protocol family 31
[ 15.927413] Bluetooth: HCI device and connection manager initialized
[ 15.927416] Bluetooth: HCI socket layer initialized
[ 15.927417] Bluetooth: L2CAP socket layer initialized
[ 15.927421] Bluetooth: SCO socket layer initialized
[ 15.928797] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.928799] Bluetooth: BNEP filters: protocol multicast
[ 15.934070] Bluetooth: RFCOMM TTY layer initialized
[ 15.934075] Bluetooth: RFCOMM socket layer initialized
[ 15.934076] Bluetooth: RFCOMM ver 1.11
[ 16.153220] r8169 0000:02:00.0: eth0: link down
[ 16.153229] r8169 0000:02:00.0: eth0: link down
[ 16.153923] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.154236] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.896407] r8169 0000:02:00.0: eth0: link up
[ 17.897086] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.272957] 3:3:1: cannot get freq at ep 0x84
[ 18.318073] 3:3:1: cannot get freq at ep 0x84
[ 19.013024] init: plymouth-stop pre-start process (1973) terminated with status 1
[ 41.290041] usb 1-4: USB disconnect, device number 3
[ 43.532111] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[ 43.730153] 5:3:1: cannot get freq at ep 0x84
[ 43.738894] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[ 43.738906] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1
[ 43.809354] 5:3:1: cannot get freq at ep 0x84
[ 43.853574] 5:3:1: cannot get freq at ep 0x84
lsmod
Module Size Used by
rfcomm 47604 0
bnep 18281 2
bluetooth 180113 10 rfcomm,bnep
binfmt_misc 17540 1
snd_usb_audio 122982 1
ppdev 17113 0
rc_it913x_v2 12511 0
snd_hda_codec_realtek 224173 1
tuner_it913x 13082 1
af9033 34847 1
radeon 808783 2
snd_hda_intel 33719 2
snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel
dvb_usb_af9035 23708 0
snd_pcm 97275 3 snd_usb_audio,snd_hda_intel,snd_hda_codec
dvb_usb_v2 23935 1 dvb_usb_af9035
dvb_core 105877 1 dvb_usb_v2
rc_core 27261 4 rc_it913x_v2,dvb_usb_af9035,dvb_usb_v2
snd_hwdep 17764 2 snd_usb_audio,snd_hda_codec
snd_usbmidi_lib 29476 1 snd_usb_audio
snd_seq_midi 13324 0
k10temp 13166 0
psmouse 97519 0
serio_raw 13211 0
snd_rawmidi 30748 2 snd_usbmidi_lib,snd_seq_midi
edac_core 53746 0
edac_mce_amd 23709 0
snd_seq_midi_event 14899 1 snd_seq_midi
parport_pc 32866 1
snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29990 2 snd_pcm,snd_seq
ttm 76949 1 radeon
snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq
drm_kms_helper 46978 1 radeon
drm 241971 4 radeon,ttm,drm_kms_helper
snd 79041 17 snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_algo_bit 13423 1 radeon
soundcore 15091 1 snd
snd_page_alloc 18529 2 snd_hda_intel,snd_pcm
sp5100_tco 13791 0
i2c_piix4 13301 0
mac_hid 13253 0
shpchp 37201 0
wmi 19256 0
lp 17799 0
parport 46562 3 ppdev,parport_pc,lp
usb_storage 49198 0
pata_atiixp 13204 0
r8169 62190 0
Bon courage pour la longue lecture !!
C’est quoi que tu essaies de brancher ?
En gardant ton périphérique branché, indique le retour de:
Note: l’erreur relevée semble concerner un bug dans avec le driver audio qui gère ton périphérique.
[ 41.290041] usb 1-4: USB disconnect, device number 3
[ 43.532111] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[ 43.730153] 5:3:1: cannot get freq at ep 0x84
[ 43.738894] usb_audio: Warning! Unlikely big volume range (=3328), cval->res is probably wrong.
[ 43.738906] usb_audio: [2] FU [Mic Capture Volume] ch = 1, val = 4608/7936/1
[ 43.809354] 5:3:1: cannot get freq at ep 0x84
[ 43.853574] 5:3:1: cannot get freq at ep 0x84
J’essaie de brancher une webcam (Genius eFace 2050AF), qui fonctionne bien sous un autre linux et sous windows.
Voilà les réponses :
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0458:706b KYE Systems Corp. (Mouse Systems)
Bus 001 Device 004: ID 07ca:3835 AVerMedia Technologies, Inc.
Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
La webcam n’existe pas dans la liste.
[code]lsusb -t
1-4:1.0: No such file or directory
1-4:1.1: No such file or directory
/: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/2p, 12M
/: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/3p, 12M
|__ Port 1: Dev 2, If 0, Class=stor., Driver=usb-storage, 12M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/6p, 480M
|__ Port 4: Dev 3, If 0, Class=‘bInterfaceClass 0x0e not yet handled’, Driver=, 480M
|__ Port 4: Dev 3, If 1, Class=‘bInterfaceClass 0x0e not yet handled’, Driver=, 480M
|__ Port 4: Dev 3, If 2, Class=audio, Driver=snd-usb-audio, 480M
|__ Port 4: Dev 3, If 3, Class=audio, Driver=snd-usb-audio, 480M
|__ Port 6: Dev 4, If 0, Class=vend., Driver=dvb_usb_af9035, 480M
[/code]
Bonne lecture.
Quels autres périphériques USB sont branchés ? AVerMedia Technologies c’est un Tuner TV c’est ça ?
Es-tu sûr que tu as tapé ces commandes en ayant ta webcam branchée ? Car ça n’est pas normal qu’elle n’apparaisse pas dans lsusb (idem pour dmesg).
Les fichiers en question ont disparu après ton essaie d’installation (git clone git://linuxtv.org/media_build.git cd media_build ./build) ?
Oui, AVerMedia Technologies est un Tuner TV !
Il n’y a pas d’autres périphériques branchés.
Je suis sûr que ma webcam était branchée lors des commandes lsusb et dmesg, mais elle n’apparaît pas non plus sous l’autre linux (ou sous windows) où elle fonctionne très bien. Cette webcam n’a besoin d’aucun pilote pour fonctionner.
Les fichiers en question ont bien disparu après mon essai d’installation (git clone git://linuxtv.org/media_build.git cd media_build ./build), c’est donc de ce côté qu’il faut chercher il me semble.
Oui mais… lsusb, c’est censé (à ma connaissance) afficher le périphérique dans tous les cas. On parle bien d’une webcam branchée en USB là non ?
lsusb ça interroge tout ce qui est branché, peu importe s’il y a des modules (pilotes) chargés ou pas. Tout comme le fait lspci.
Il y a un voyant qui s’allume lorsque tu branches la webcam ?
Oui, un voyant s’allume lorsque je branche la webcam en usb (c’est sûr), ce voyant s’éteint au bout de quelques secondes.
Lorsque j’utilise un autre linux et le logiciel guvcview (ou encore skype) le voyant de la webcam s’allume et reste allumé (elle est active alors). Il s’éteint dès que je quitte guvcview ou skype.
Voilà le résultat de lsusb lorsque la webcam n’est pas branchée :
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 07ca:3835 AVerMedia Technologies, Inc.
Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Et maintenant lorsque la webcam est brabchée :
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0458:706b KYE Systems Corp. (Mouse Systems)
Bus 001 Device 004: ID 07ca:3835 AVerMedia Technologies, Inc.
Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Donc la webcam serait reconnue à la ligne :
Bus 001 Device 005: ID 0458:706b KYE Systems Corp. (Mouse Systems)
c’est étrange car la marque Genius n’apparaît pas, mais c’est ainsi.
Je ne sais pas si ça affectera lsusb, mais tu peux tenter de mettre à jour les libellés:
(root)
Mais d’après ces pages, l’intitulé est le bon, mais ton modèle précis n’y est pas recensé:
- cateee.net/lkddb/web-lkddb/USB_GSPCA.html
- cateee.net/lkddb/web-lkddb/USB_GSPCA_ZC3XX.html
- ideasonboard.org/uvc/
Branches-tu cette webcam directement sur le port USB, ou bien via un hub USB ?
Lorsque la cam est branchée, tu peux toujours tenter un:
Puis observer la sortie de dmesg.
Si ça ne fonctionne pas, tu peux tenter une mise à jour de ton noyau (depuis les dépots wheezy-backports si tu es sous Wheezy).
La webcam est branchée directement sur le port USB.
Comme je le pensais, cela ne résout pas le problème.
Réponse à :
modprobe uvcvideo
modprobe uvcvideo
FATAL: Module uvcvideo not found.
Mettre à jour le noyau est sans doute risqué, non ?
Est-ce que je peux passer brutalement du noyau 3.2.0.59 au noyau 3.13 ?
Quelle est la bonne méthode pour faire cette mise à jour ?
Je trouve étrange que tu n’aies pas ce module.
Balance voir un:
Ainsi que:
Installer un kernel plus récent n’est pas risqué. Tu conserveras l’ancienne version installée, donc toujours accessible dans grub.
La procédure pour faire ça bien est décrite ici:
isalo.org/wiki.debian-fr/So … _Backports
Ajouter ces dépots. Puis installer avec
Résultats des codes :
find /lib/modules/ -iname "*uvcvideo*"
/lib/modules/3.2.0-23-generic/kernel/drivers/media/video/uvc/uvcvideo.ko
uname -a
Linux nom-MS-7641 3.2.0-59-generic #90-Ubuntu SMP Tue Jan 7 22:43:51 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
J’ai oublié de préciser que sous LMDE (Linux Mint Debian) noyau 3.11, tout fonctionne car j’ai les fichiers /dev/video0 et /dev/v4l.
Mais c’est sous Linux Mint 13 avec le noyau 3.2.0.59 que les fichiers ont disparu.
Je suppose que la méthode pour les retrouver est la même quelle que soit la distribution de Linux !
Mais je fais peut-être une erreur en raisonnant ainsi.
J’ai lu que sous Linux Mint, la mise à jour du noyau enlève du Grub les noyaux précédents, est-ce bien réel ?