Bonjour,
Impossible d’installer ma carte wifi Wireless AC-9260
Pourtant:
# lshw -class network
*-network NON-RÉCLAMÉ
description: Network controller
produit: Wireless-AC 9260
fabriquant: Intel Corporation
identifiant matériel: 0
information bus: pci@0000:05:00.0
version: 29
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix cap_list
configuration: latency=0
ressources: mémoire:fc700000-fc703fff
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:06:00.0
nom logique: enp6s0
version: 16
numéro de série: b4:2e:99:6f:f9:84
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=6.1.0-0.deb11.7-amd64 duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.1.50 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
ressources: irq:24 portE/S:f000(taille=256) mémoire:fc604000-fc604fff mémoire:fc600000-fc603fff
puis:
# dmesg | grep iwlwifi
[ 10.403228] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
[ 10.444861] iwlwifi: probe of 0000:05:00.0 failed with error -110
# dmesg | grep -i wireless
[ 10.391722] Intel(R) Wireless WiFi driver for Linux
# dmesg | grep -i wireless
[ 10.391722] Intel(R) Wireless WiFi driver for Linux
# dpkg --list | egrep -i 'wireless|iwlwifi|intel' | awk '{ print $2 }'
firmware-iwlwifi
i965-va-driver:i386
intel-media-va-driver:i386
intel-microcode
iucode-tool
iw
libdrm-intel1:amd64
libdrm-intel1:i386
libibus-1.0-5:amd64
libigdgmm11:i386
libiw30:amd64
libmfx1:amd64
rfkill
whois
wireless-regdb
wireless-tools
xserver-xorg-video-intel
et noyau:
# uname -ar
Linux zargospc 6.1.0-0.deb11.7-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.20-2~bpo11+1 (2023-04-23) x86_64 GNU/Linux
# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether b4:2e:99:6f:f9:84 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.50/24 brd 192.168.1.255 scope global dynamic enp6s0
valid_lft 42066sec preferred_lft 42066sec
inet6 2a01:cb00:878a:2600:b62e:99ff:fe6f:f984/64 scope global dynamic mngtmpaddr
valid_lft 86036sec preferred_lft 14036sec
inet6 fe80::b62e:99ff:fe6f:f984/64 scope link
valid_lft forever preferred_lft forever
les firmwares installés sont en backports.
Je n’ai rien trouvé de probant sur l’erreur -110.
j’ai peur d’avoir un soucis avec le noyau.