Reconfigure xserver-xorg a foiré

Support Debian
#1

Bonsoir,
après quelques essais de résolution d’écran, j’ai perdu la poubelle: elle n’apparaît plus sur le bureau.
De plus, les icônes sont maintenant exagérément grandes.
J’ai cru bon de tenter :

Mais ça n’a rien changé! :confused:
En fait, sur le coup, j’avais beaucoup plus de possibilité de résolutions d’écran (trop, même par rapport à ce que j’avais choisi) mais au démarrage suivant, j’ai plus que 3 choix ( et 2 pour la fréquence), soit moins qu’avant la manip
Que faire? Essayer une autre fois ? Aurai-je oublié une manip pour sauvegarder la config?
Pour le clavier, j’ai choisi …105 : je n’ai plus la fonction Alt Gr :
Impossible d’écrire le [ , par exemple… :cry:
Mon clavier est un Logitech Cordless Keyboard MX700 (pack clavier + souris)

:stuck_out_tongue: J’en perd mon Latin-9… :unamused:

#2

Et tu n’as pas sauvegardé ton fichier xorg.conf?
Regarde si le système ne l’as pas fait pour toi dans /etc/X11: tu devrais peut-être avoir un autre fichier xorg.conf avec un nom de date ou un truc comme ça…
(xorg.conf2007xxxxxxxx)

#3

Bonjour,
Oui, j’ai les deux fichiers xorg.conf et xorg.conf20070911210443 ;y’en a un en trop?
Dans les 2, il y a assez de choix de résolutions d’écran, alors qu’en pratique, je n’ai que 640x480 , 800x600 et 1024x768

xorg.conf:

[quote]# /etc/X11/xorg.conf (xorg X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

(Type “man /etc/X11/xorg.conf” at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath “/usr/X11R6/lib/X11/fonts/75dpi”
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
Option “XkbOptions” "altwin:meta_win"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option “Device” "/dev/input/mice"
Option “Protocol” "ImPS/2"
Option “Emulate3Buttons” "true"
EndSection

Section "Device"
Identifier "Carte vidéo générique"
Driver "ati"
BusID "PCI:1:0:0"
VideoRam 128000
Option “UseFBDev” "true"
EndSection

Section "Monitor"
Identifier "Q995"
Option "DPMS"
HorizSync 30-57
VertRefresh 43-72
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Q995"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection[/quote]

xorg.conf20070911210443:

[quote]# /etc/X11/xorg.conf (xorg X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the /etc/X11/xorg.conf manual page.

(Type “man /etc/X11/xorg.conf” at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath “/usr/X11R6/lib/X11/fonts/75dpi”
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option “Device” "/dev/input/mice"
Option “Protocol” "ImPS/2"
Option “Emulate3Buttons” "true"
EndSection

Section "Device"
Identifier "ATI Technologies Inc RV280 [Radeon 9200 SE]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Q995"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV280 [Radeon 9200 SE]"
Monitor "Q995"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection
[/quote]

#4

salut boulga

dans ton xorg.conf

[quote]Section "Device"
Identifier "Carte vidéo générique"
Driver "ati"
BusID "PCI:1:0:0"
VideoRam 128000
Option “UseFBDev” "true"
EndSection
…
…
.et plus bas …
…
…
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Q995"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection
[/quote]
tu as une carte générique de déclaré

dans ton xorg.conf20070911210443:

[quote]Section "Device"
Identifier "ATI Technologies Inc RV280 [Radeon 9200 SE]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
…
…
.et plus bas …
…
…
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc RV280 [Radeon 9200 SE]"
Monitor "Q995"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes “1600x1200” “1280x1024” “1152x864” “1024x768” “800x600” "640x480"
EndSubSection

[/quote]

et là tu as une carte radeon
si c’est la bonne carte et la bonne config tu renommes le fichier xorg.conf20070911210443: en xorg.conf

et l’autre tu le renommes par exemple en xorg.conf200709pacool :laughing:

un morceau de mon xorg.conf

[quote]Section "Device"
Identifier "ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection

-----plus bas--------

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050"
EndSubSection[/quote]
A+

#5

Bon, j’ai réussi, aprés quelques contorsions , à échanger les deux fichiers.
En fait, c’est “tout simple”, :unamused: : Il suffit de faire:

comme indiqué dans Xorg:[quote=“Xorg”]# This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg [/quote]

En tout cas, ça m’a changé les valeurs de xorg.conf et ça a pris le fichier le plus récent( j’avais, avant , ré-essayer de reconfigurer “normalement”)
Ces modifs ont été prise en compte après un redémarrage de X

Résultat: j’ai bien toutes les résolutions (même plus que désiré…) mais les icônes sont toujours trop grandes et la touche Alt Gr ne fonctionne toujours pas.
Mais je commence à comprendre le principe: il faut juste que je trouve les bons paramètres pour mon clavier…

Merci, en tout cas!

#6

dpkg-reconfigure -phigh xserver-xorg ne va pas copier le contenu d’un fichier xorg déjà existant, mais en créer un en demandant le minimum de question (normalement ça passe la priorité high à debconf, il me semble).

#7

Bon, il va falloir que j’étudie ça…plus tard!