Resolv.conf + IP changent à chaque boot !

Support Debian
#1

Bonjour à tous,

Depuis que j’ai installé il y a 2 jours enlightenment 0.16.999.062, à chaque reboot mon adresse IP statique n’est pas celle mentionnée dans le fichier /etc/network/interfaces, et mon fichier /etc/resolv.conf est modifié avec une mauvaise IP (toujours la même) pour le serveur de noms !!! ( => relation de cause à effet : :017 )
Donc à chaque fois, je suis obligé de modifier mon resolv.conf -rw-r--r-- 1 root root 24 avr 30 10:45 resolv.conf
et de faire un ifdown eth0 / ifup eth0 et après (comme avec un mars) ça repart ! Pour info, ça ne le fait qu’avec ce PC, les autres (qui ont la même config) fonctionnent sans souci !

Quelqu’un aurait une piste svp ou un conseil vers où se diriger pour trouver d’où ça vient ?

Merci d’avance pour votre aide,
Eric

#2

Salut

Tu as un gestionnaire de réseau “graphique” ? Genre, network manager, wicd…
Si oui, fort probable que c’est lui qui va écrire dedans.

:006

#3

Salut dric64 !

Je ne comprends pas !

Je n’utilise pas les outils GUI pour configurer mon réseau…
J’ai vérifié dans le Centre de configuration de KDE/Internet et réseau/Paramètres réseau : tout est bon !
J’ai vérifié si network-manager était installé :# apt-cache policy network-manager network-manager: Installé : (aucun) Candidat : 0.6.6-3 Table de version : 0.8-1 0 90 http://ftp.fr.debian.org testing/main Packages 50 http://ftp.fr.debian.org unstable/main Packages 0.7.2-2~bpo50+1 0 1 http://www.backports.org lenny-backports/main Packages 0.6.6-3 0 990 http://ftp.fr.debian.org stable/main Packages 100 /var/lib/dpkg/statusidem pour wicd :# apt-cache policy wicd wicd: Installé : (aucun) Candidat : 1.7.0+ds1-2 Table de version : 1.7.0+ds1-2 0 90 http://ftp.fr.debian.org testing/main Packages 50 http://ftp.fr.debian.org unstable/main Packages 1.6.2.2-1~bpo50+1 0 1 http://www.backports.org lenny-backports/main Packagesou même encore knetworkmanager :# apt-cache policy knetworkmanager knetworkmanager: Installé : (aucun) Candidat : (aucun) Table de version :
Par contre, lorsque je regarde dans /etc/rc2.d/ :/etc/rc2.d # ls README S14avahi-daemon S20nfs-common S20saned S26network-manager S89cron S05loadcpufreq S19cpufrequtils S20nvidia-glx S23ntp S26network-manager-dispatcher S99kdm S10rsyslog S20cups S20nvidia-kernel S24dhcdbd S30mpd S99rc.local S12acpid S20dirmngr S20openbsd-inetd S24hal S89anacron S99rmnologin S12dbus S20kerneloops S20rsync S26exalt-daemon S89atd S99stop-bootlogdj’ai network-manager qui à priori doit démarrer… alors qu’il n’est pas installé ???

[HS] J’ai la nette impression que c’est un peu le b…l dans ma lenny ! [/HS]

Je met le résultat d’un dmesg, au cas où :# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-21lenny4) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Tue Mar 9 22:29:32 UTC 2010 [ 0.000000] Command line: root=/dev/sda1 ro quiet vga=837 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fa0000 (usable) [ 0.000000] BIOS-e820: 0000000077fa0000 - 0000000077fae000 (ACPI data) [ 0.000000] BIOS-e820: 0000000077fae000 - 0000000077fe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077fe0000 - 0000000078000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 491424) 1 entries of 3200 used [ 0.000000] max_pfn_mapped = 1048576 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FBE50, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT 77FA0100, 007C (r1 _ASUS_ Notebook 20080425 MSFT 97) [ 0.000000] ACPI: FACP 77FA0290, 00F4 (r3 042508 FACP1114 20080425 MSFT 97) [ 0.000000] ACPI: DSDT 77FA04A0, ACFE (r1 A0925 A0925000 0 INTL 20060113) [ 0.000000] ACPI: FACS 77FAE000, 0040 [ 0.000000] ACPI: APIC 77FA0390, 0080 (r1 042508 APIC1114 20080425 MSFT 97) [ 0.000000] ACPI: MCFG 77FA0410, 003C (r1 042508 OEMMCFG 20080425 MSFT 97) [ 0.000000] ACPI: WDRT 77FA0450, 0047 (r1 042508 NV-WDRT 20080425 MSFT 97) [ 0.000000] ACPI: OEMB 77FAE040, 0073 (r1 042508 OEMB1114 20080425 MSFT 97) [ 0.000000] ACPI: HPET 77FAB1A0, 0038 (r1 042508 OEMHPET0 20080425 MSFT 97) [ 0.000000] ACPI: INFO 77FAE0C0, 0124 (r1 042508 AMDINFO 20080425 MSFT 97) [ 0.000000] ACPI: NVHD 77FAE1F0, 0284 (r1 042508 NVHDCP 20080425 MSFT 97) [ 0.000000] ACPI: OSFR 77FAB1E0, 00B0 (r1 042508 OEMOSFR 20080425 MSFT 97) [ 0.000000] ACPI: SLIC 77FAB290, 0176 (r1 _ASUS_ Notebook 20080425 MSFT 97) [ 0.000000] ACPI: SSDT 77FAB410, 028A (r1 A M I POWERNOW 1 AMD 1) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077fa0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 491424) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000077fa0000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff] [ 0.000000] bootmap [0000000000011000 - 000000000001fff7] pages f [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS [ 0.000000] early res: 3 [3798c000-37fefb44] RAMDISK [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-bfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 491424 [ 0.000000] On node 0 totalpages: 491327 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1246 pages reserved [ 0.000000] DMA zone: 2697 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6663 pages used for memmap [ 0.000000] DMA32 zone: 480665 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 78000000:86c00000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 483362 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet vga=837 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC calibrated against PM_TIMER [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.000000] time.c: Detected 2599.996 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] Node 0: aperture @ dba000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] No AGP bridge found [ 0.004000] Memory: 1925164k/1965696k available (2228k kernel code, 40144k reserved, 1085k data, 392k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083829] Calibrating delay using timer specific routine.. 5205.49 BogoMIPS (lpj=10410993) [ 0.083874] Security Framework initialized [ 0.083879] SELinux: Disabled at boot. [ 0.083882] Capability LSM initialized [ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.084005] Mount-cache hash table entries: 256 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084005] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.084005] CPU 0/0 -> Node 0 [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] ACPI: Core revision 20080321 [ 0.136501] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.136505] Using local APIC timer interrupts. [ 0.144009] APIC timer calibration result 12500012 [ 0.144009] Detected 12.500 MHz APIC timer. [ 0.144009] Booting processor 1/1 ip 6000 [ 0.152009] Initializing CPU#1 [ 0.152009] Calibrating delay using timer specific routine.. 5200.11 BogoMIPS (lpj=10400234) [ 0.152009] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.152009] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.152009] CPU 1/1 -> Node 0 [ 0.152009] CPU: Physical Processor ID: 0 [ 0.152009] CPU: Processor Core ID: 1 [ 0.231864] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.231879] Brought up 2 CPUs [ 0.231881] Total of 2 processors activated (10405.61 BogoMIPS). [ 0.232014] CPU0 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 0 1 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] CPU1 attaching sched-domain: [ 0.232014] domain 0: span 0-1 [ 0.232014] groups: 1 0 [ 0.232014] domain 1: span 0-1 [ 0.232014] groups: 0-1 [ 0.232014] net_namespace: 1224 bytes [ 0.232014] Booting paravirtualized kernel on bare hardware [ 0.232014] NET: Registered protocol family 16 [ 0.232014] node 0 link 0: io port [1000, ffffff] [ 0.232014] TOM: 0000000080000000 aka 2048M [ 0.232014] node 0 link 0: mmio [e0000000, efffffff] [ 0.232014] node 0 link 0: mmio [80000000, dfffffff] [ 0.232014] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.232014] node 0 link 0: mmio [a0000, bffff] [ 0.232014] bus: [00,07] on node 0 link 0 [ 0.232014] bus: 00 index 0 io port: [0, ffff] [ 0.232014] bus: 00 index 1 mmio: [80000000, fcffffffff] [ 0.232014] bus: 00 index 2 mmio: [a0000, bffff] [ 0.232014] ACPI: bus type pci registered [ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.232014] PCI: Not using MMCONFIG. [ 0.232014] PCI: Using configuration type 1 for base access [ 0.232014] ACPI: EC: Look up EC in DSDT [ 0.251066] ACPI: Interpreter enabled [ 0.251068] ACPI: (supports S0 S1 S3 S4 S5) [ 0.251083] ACPI: Using IOAPIC for interrupt routing [ 0.251148] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.262515] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.275912] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.296018] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.298725] PCI: Transparent bridge - 0000:00:08.0 [ 0.299149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.299686] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.299838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.299957] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.300097] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.300237] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] [ 0.300377] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.320108] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.320405] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.320704] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 [ 0.320999] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.321299] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *11 [ 0.321365] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.321365] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.321365] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.321365] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.321365] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.323266] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.323563] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.323863] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *10 [ 0.324159] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.324455] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.324751] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.325051] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15 [ 0.325347] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.325644] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.325940] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.326240] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *7 [ 0.326536] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.326833] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.327258] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.327556] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.327853] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.328149] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.328446] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.328742] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.329040] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.329338] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.329636] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.329936] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.330234] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.330531] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.330829] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.331133] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *7 [ 0.331435] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.331732] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.332033] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7 [ 0.332334] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *11 [ 0.332635] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.332936] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15 [ 0.333236] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.333585] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.333887] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.334187] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *15 [ 0.334609] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 09, should be 08 [20080321] [ 0.334740] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.334889] pnp: PnP ACPI init [ 0.334895] ACPI: bus type pnp registered [ 0.334914] pnp 00:00: parse allocated resources [ 0.335066] pnp 00:00: add io 0xcf8-0xcff flags 0x1 [ 0.335092] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.335092] pnp 00:01: parse allocated resources [ 0.335092] pnp 00:01: add dma 4 flags 0x4 [ 0.335092] pnp 00:01: add io 0x0-0xf flags 0x1 [ 0.335092] pnp 00:01: add io 0x81-0x83 flags 0x1 [ 0.335092] pnp 00:01: add io 0x87-0x87 flags 0x1 [ 0.335092] pnp 00:01: add io 0x89-0x8b flags 0x1 [ 0.335092] pnp 00:01: add io 0x8f-0x8f flags 0x1 [ 0.335092] pnp 00:01: add io 0xc0-0xdf flags 0x1 [ 0.335092] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.335092] pnp 00:02: parse allocated resources [ 0.335092] pnp 00:02: add io 0x61-0x61 flags 0x1 [ 0.335092] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.335092] pnp 00:03: parse allocated resources [ 0.335092] pnp 00:03: add io 0xf0-0xff flags 0x1 [ 0.335092] pnp 00:03: add irq 13 flags 0x1 [ 0.335092] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.335092] pnp 00:04: parse allocated resources [ 0.335544] pnp 00:04: add io 0x10-0x1f flags 0x1 [ 0.335546] pnp 00:04: add io 0x22-0x3f flags 0x1 [ 0.335548] pnp 00:04: add io 0x44-0x4d flags 0x1 [ 0.335550] pnp 00:04: add io 0x50-0x5f flags 0x1 [ 0.335552] pnp 00:04: add io 0x62-0x63 flags 0x1 [ 0.335553] pnp 00:04: add io 0x65-0x6f flags 0x1 [ 0.335555] pnp 00:04: add io 0x72-0x7f flags 0x1 [ 0.335557] pnp 00:04: add io 0x80-0x80 flags 0x1 [ 0.335558] pnp 00:04: add io 0x84-0x86 flags 0x1 [ 0.335560] pnp 00:04: add io 0x88-0x88 flags 0x1 [ 0.335562] pnp 00:04: add io 0x8c-0x8e flags 0x1 [ 0.335564] pnp 00:04: add io 0x90-0x9f flags 0x1 [ 0.335565] pnp 00:04: add io 0xa2-0xbf flags 0x1 [ 0.335567] pnp 00:04: add io 0xe0-0xef flags 0x1 [ 0.335569] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1 [ 0.335571] pnp 00:04: add io 0x800-0x80f flags 0x1 [ 0.335572] pnp 00:04: add io 0x500-0x57f flags 0x1 [ 0.335574] pnp 00:04: add io 0x580-0x5ff flags 0x1 [ 0.335576] pnp 00:04: add io 0x800-0x87f flags 0x1 [ 0.335578] pnp 00:04: add io 0x880-0x8ff flags 0x1 [ 0.335580] pnp 00:04: add io 0xd00-0xd7f flags 0x1 [ 0.335581] pnp 00:04: add io 0xd80-0xdff flags 0x1 [ 0.335583] pnp 00:04: add io 0xa00-0xafe flags 0x1 [ 0.335585] pnp 00:04: add io 0x900-0x9fd flags 0x1 [ 0.335587] pnp 00:04: add mem 0x0-0xffffffffffffffff flags 0x10000000 [ 0.335589] pnp 00:04: add mem 0x0-0xffffffffffffffff flags 0x10000000 [ 0.335591] pnp 00:04: add mem 0xfed04000-0xfed04fff flags 0x0 [ 0.335593] pnp 00:04: add mem 0xfee01000-0xfeefffff flags 0x0 [ 0.335595] pnp 00:04: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.335778] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.335934] pnp 00:05: parse allocated resources [ 0.336123] pnp 00:05: add mem 0xfed00000-0xfed00fff flags 0x1 [ 0.336130] pnp 00:05: add irq 8 flags 0x1 [ 0.336288] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.336301] pnp 00:06: parse allocated resources [ 0.336357] pnp 00:06: add io 0x70-0x71 flags 0x1 [ 0.336515] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.337011] pnp 00:07: parse allocated resources [ 0.337552] pnp 00:07: add io 0x3f8-0x3ff flags 0x1 [ 0.337559] pnp 00:07: add irq 4 flags 0x1 [ 0.337561] pnp 00:07: parse resource options [ 0.337563] pnp 00:07: new independent option [ 0.337611] pnp 00:07: new dependent option (priority 0x0) [ 0.337614] pnp 00:07: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.337618] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00000010 flags 0x1 [ 0.337621] pnp 00:07: new dependent option (priority 0x1) [ 0.337623] pnp 00:07: io min 0x3f8 max 0x3f8 align 1 size 8 flags 0x1 [ 0.337627] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.337629] pnp 00:07: new dependent option (priority 0x1) [ 0.337631] pnp 00:07: io min 0x2f8 max 0x2f8 align 1 size 8 flags 0x1 [ 0.337635] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.337638] pnp 00:07: new dependent option (priority 0x1) [ 0.337640] pnp 00:07: io min 0x3e8 max 0x3e8 align 1 size 8 flags 0x1 [ 0.337643] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.337646] pnp 00:07: new dependent option (priority 0x1) [ 0.337648] pnp 00:07: io min 0x2e8 max 0x2e8 align 1 size 8 flags 0x1 [ 0.337651] pnp 00:07: irq bitmask 00000000,00000000,00000000,00000000,00000000,00000000,00000000,00001cf8 flags 0x1 [ 0.337653] pnp 00:07: end dependent options [ 0.337811] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.337877] pnp 00:08: parse allocated resources [ 0.337882] pnp 00:08: add io 0x60-0x60 flags 0x1 [ 0.337884] pnp 00:08: add io 0x64-0x64 flags 0x1 [ 0.337891] pnp 00:08: add irq 1 flags 0x1 [ 0.338050] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.338117] pnp 00:09: parse allocated resources [ 0.338180] pnp 00:09: add irq 12 flags 0x1 [ 0.338340] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) [ 0.338352] pnp 00:0a: parse allocated resources [ 0.338630] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001 [ 0.338632] pnp 00:0a: add io 0x230-0x23f flags 0x1 [ 0.338633] pnp 00:0a: add io 0x290-0x29f flags 0x1 [ 0.338635] pnp 00:0a: add io 0xa00-0xa0f flags 0x1 [ 0.338637] pnp 00:0a: add io 0xa10-0xa1f flags 0x1 [ 0.338639] pnp 00:0a: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.338819] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338833] pnp 00:0b: parse allocated resources [ 0.338977] pnp 00:0b: add mem 0xfec00000-0xfec00fff flags 0x0 [ 0.338979] pnp 00:0b: add mem 0xfee00000-0xfee00fff flags 0x0 [ 0.338981] pnp 00:0b: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.339092] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.341255] pnp 00:0c: parse allocated resources [ 0.341328] pnp 00:0c: add mem 0xe0000000-0xefffffff flags 0x0 [ 0.341331] pnp 00:0c: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c [ 0.341511] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.341575] pnp 00:0d: parse allocated resources [ 0.341790] pnp 00:0d: add mem 0x0-0x9ffff flags 0x1 [ 0.341792] pnp 00:0d: add mem 0xc0000-0xcffff flags 0x0 [ 0.341794] pnp 00:0d: add mem 0xe0000-0xfffff flags 0x0 [ 0.341796] pnp 00:0d: add mem 0x100000-0x7fffffff flags 0x1 [ 0.341798] pnp 00:0d: add mem 0xfec00000-0xffffffff flags 0x0 [ 0.341800] pnp 00:0d: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c [ 0.341985] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.346208] pnp: PnP ACPI: found 14 devices [ 0.346210] ACPI: ACPI bus type pnp unregistered [ 0.347093] usbcore: registered new interface driver usbfs [ 0.347093] usbcore: registered new interface driver hub [ 0.347093] usbcore: registered new device driver usb [ 0.347093] PCI: Using ACPI for IRQ routing [ 0.367094] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.367094] hpet0: 3 32-bit timers, 25000000 Hz [ 0.367094] ACPI: RTC can wake from S4 [ 0.369932] Switched to high resolution mode on CPU 0 [ 0.371236] Switched to high resolution mode on CPU 1 [ 0.381886] pnp: the driver 'system' has been registered [ 0.381900] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.381902] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.381905] system 00:04: ioport range 0x500-0x57f has been reserved [ 0.381908] system 00:04: ioport range 0x580-0x5ff has been reserved [ 0.381911] system 00:04: ioport range 0x800-0x87f could not be reserved [ 0.381914] system 00:04: ioport range 0x880-0x8ff has been reserved [ 0.381916] system 00:04: ioport range 0xd00-0xd7f has been reserved [ 0.381919] system 00:04: ioport range 0xd80-0xdff has been reserved [ 0.381922] system 00:04: ioport range 0xa00-0xafe has been reserved [ 0.381925] system 00:04: ioport range 0x900-0x9fd has been reserved [ 0.381928] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.381931] system 00:04: iomem range 0xfee01000-0xfeefffff could not be reserved [ 0.381934] system 00:04: driver attached [ 0.381939] system 00:0a: ioport range 0x230-0x23f has been reserved [ 0.381942] system 00:0a: ioport range 0x290-0x29f has been reserved [ 0.381945] system 00:0a: ioport range 0xa00-0xa0f has been reserved [ 0.381948] system 00:0a: ioport range 0xa10-0xa1f has been reserved [ 0.381951] system 00:0a: driver attached [ 0.381956] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.381959] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved [ 0.381961] system 00:0b: driver attached [ 0.381966] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.381969] system 00:0c: driver attached [ 0.381974] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.381977] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.381980] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.381982] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved [ 0.381985] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.381988] system 00:0d: driver attached [ 0.383077] PCI: Bridge: 0000:00:08.0 [ 0.383077] IO window: c000-cfff [ 0.383077] MEM window: 0xfcf00000-0xfcffffff [ 0.383077] PREFETCH window: disabled. [ 0.383077] PCI: Bridge: 0000:00:0b.0 [ 0.383077] IO window: d000-dfff [ 0.383077] MEM window: 0xfd000000-0xfeafffff [ 0.383077] PREFETCH window: 0x00000000ce000000-0x00000000dfffffff [ 0.383077] PCI: Bridge: 0000:00:10.0 [ 0.383077] IO window: disabled. [ 0.383077] MEM window: disabled. [ 0.383077] PREFETCH window: disabled. [ 0.383077] PCI: Bridge: 0000:00:12.0 [ 0.383077] IO window: e000-efff [ 0.383077] MEM window: 0xfeb00000-0xfebfffff [ 0.383077] PREFETCH window: disabled. [ 0.383077] PCI: Bridge: 0000:00:13.0 [ 0.383077] IO window: disabled. [ 0.383077] MEM window: disabled. [ 0.383077] PREFETCH window: disabled. [ 0.383077] PCI: Bridge: 0000:00:14.0 [ 0.383077] IO window: disabled. [ 0.383077] MEM window: disabled. [ 0.383077] PREFETCH window: disabled. [ 0.383077] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 0.383077] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.383077] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.383077] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.383077] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 0.383077] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.383077] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.383077] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 0.383077] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17 [ 0.383077] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LN3A] -> GSI 17 (level, low) -> IRQ 17 [ 0.383077] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 0.383077] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 16 [ 0.383077] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LN4A] -> GSI 16 (level, low) -> IRQ 16 [ 0.383077] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 0.383077] NET: Registered protocol family 2 [ 0.419143] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.420053] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.421788] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.421788] TCP: Hash tables configured (established 262144 bind 65536) [ 0.421788] TCP reno registered [ 0.435208] NET: Registered protocol family 1 [ 0.435301] checking if image is initramfs... it is [ 0.811673] Freeing initrd memory: 6542k freed [ 0.818753] audit: initializing netlink socket (disabled) [ 0.818753] type=2000 audit(1272616757.808:1): initialized [ 0.818753] Total HugeTLB memory allocated, 0 [ 0.818753] VFS: Disk quotas dquot_6.5.1 [ 0.818753] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.818753] msgmni has been set to 3772 [ 0.818753] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.818753] io scheduler noop registered [ 0.818753] io scheduler anticipatory registered [ 0.818753] io scheduler deadline registered [ 0.818753] io scheduler cfq registered (default) [ 0.818753] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:00:12.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:00:13.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:00:14.0: Enabling HT MSI Mapping [ 0.818753] pci 0000:02:00.0: Boot video device [ 0.818753] PCI: Setting latency timer of device 0000:00:10.0 to 64 [ 0.818753] assign_interrupt_mode Found MSI capability [ 0.818753] Allocate Port Service[0000:00:10.0:pcie00] [ 0.818753] PCI: Setting latency timer of device 0000:00:12.0 to 64 [ 0.818753] assign_interrupt_mode Found MSI capability [ 0.818753] Allocate Port Service[0000:00:12.0:pcie00] [ 0.818965] PCI: Setting latency timer of device 0000:00:13.0 to 64 [ 0.819129] assign_interrupt_mode Found MSI capability [ 0.819238] Allocate Port Service[0000:00:13.0:pcie00] [ 0.821452] PCI: Setting latency timer of device 0000:00:14.0 to 64 [ 0.821616] assign_interrupt_mode Found MSI capability [ 0.821725] Allocate Port Service[0000:00:14.0:pcie00] [ 0.822750] vesafb: framebuffer at 0xcf000000, mapped to 0xffffc20010980000, using 3750k, total 14336k [ 0.822750] vesafb: mode is 1600x1200x8, linelength=1600, pages=1 [ 0.822750] vesafb: scrolling: redraw [ 0.822750] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 0.830747] Console: switching to colour frame buffer device 200x75 [ 0.838747] fb0: VESA VGA frame buffer device [ 0.842749] hpet_resources: 0xfed00000 is busy [ 0.842749] Linux agpgart interface v0.103 [ 0.842749] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.842749] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.842749] pnp: the driver 'serial' has been registered [ 0.842749] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.842749] serial 00:07: driver attached [ 0.846749] brd: module loaded [ 0.846749] input: Macintosh mouse button emulation as /class/input/input0 [ 0.846749] pnp: the driver 'i8042 kbd' has been registered [ 0.846749] i8042 kbd 00:08: driver attached [ 0.846749] pnp: the driver 'i8042 aux' has been registered [ 0.846749] i8042 aux 00:09: driver attached [ 0.846749] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.846749] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.846749] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.862748] mice: PS/2 mouse device common for all mice [ 0.862748] pnp: the driver 'rtc_cmos' has been registered [ 0.862748] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.862748] rtc0: alarms up to one year, y3k [ 0.862748] rtc_cmos 00:06: driver attached [ 0.862748] cpuidle: using governor ladder [ 0.862748] cpuidle: using governor menu [ 0.862748] No iBFT detected. [ 0.862748] TCP cubic registered [ 0.862748] NET: Registered protocol family 17 [ 0.862748] registered taskstats version 1 [ 0.862748] rtc_cmos 00:06: setting system clock to 2010-04-30 08:39:18 UTC (1272616758) [ 0.862748] Freeing unused kernel memory: 392k freed [ 0.881530] input: AT Translated Set 2 keyboard as /class/input/input1 [ 0.952959] ACPI: ACPI0007:00 is registered as cooling_device0 [ 0.952959] ACPI: ACPI0007:01 is registered as cooling_device1 [ 1.242790] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.242790] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.242790] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 1.242790] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 1.242790] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.242790] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 1.242790] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfce7f000 [ 1.263396] No dock devices found. [ 1.268096] SCSI subsystem initialized [ 1.275101] libata version 3.00 loaded. [ 1.299329] usb usb1: configuration #1 chosen from 1 choice [ 1.299360] hub 1-0:1.0: USB hub found [ 1.299370] hub 1-0:1.0: 6 ports detected [ 1.401652] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.401655] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.401658] usb usb1: Product: OHCI Host Controller [ 1.401660] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd [ 1.401661] usb usb1: SerialNumber: 0000:00:02.0 [ 1.404634] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22 [ 1.404634] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [UB11] -> GSI 22 (level, low) -> IRQ 22 [ 1.404634] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 1.404634] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.404634] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 1.404634] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfce7d000 [ 1.458702] usb usb2: configuration #1 chosen from 1 choice [ 1.458728] hub 2-0:1.0: USB hub found [ 1.458736] hub 2-0:1.0: 6 ports detected [ 1.560709] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.560711] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.560713] usb usb2: Product: OHCI Host Controller [ 1.560714] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd [ 1.560716] usb usb2: SerialNumber: 0000:00:04.0 [ 1.562911] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 1.562921] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 1.562935] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 1.562938] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.562996] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 1.563029] ehci_hcd 0000:00:02.1: debug port 1 [ 1.563033] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 1.563047] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfce7ec00 [ 1.575925] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.575994] usb usb3: configuration #1 chosen from 1 choice [ 1.576020] hub 3-0:1.0: USB hub found [ 1.576027] hub 3-0:1.0: 6 ports detected [ 1.680003] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.680006] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.680008] usb usb3: Product: EHCI Host Controller [ 1.680009] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 1.680011] usb usb3: SerialNumber: 0000:00:02.1 [ 1.683485] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20 [ 1.683492] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [UB12] -> GSI 20 (level, low) -> IRQ 20 [ 1.683499] PCI: Setting latency timer of device 0000:00:04.1 to 64 [ 1.683501] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.683542] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4 [ 1.683569] ehci_hcd 0000:00:04.1: debug port 1 [ 1.683573] PCI: cache line size of 64 is not supported by device 0000:00:04.1 [ 1.683581] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfce7e800 [ 1.695545] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.695591] usb usb4: configuration #1 chosen from 1 choice [ 1.695615] hub 4-0:1.0: USB hub found [ 1.695621] hub 4-0:1.0: 6 ports detected [ 1.796178] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.796180] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.796182] usb usb4: Product: EHCI Host Controller [ 1.796183] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd [ 1.796185] usb usb4: SerialNumber: 0000:00:04.1 [ 1.796178] ahci 0000:00:09.0: version 3.0 [ 1.796178] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.796178] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 2.870356] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 2.870359] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 2.870362] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 2.874339] scsi0 : ahci [ 2.874339] scsi1 : ahci [ 2.874339] scsi2 : ahci [ 2.874339] scsi3 : ahci [ 2.874339] scsi4 : ahci [ 2.874339] scsi5 : ahci [ 2.874339] ata1: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 1275 [ 2.874339] ata2: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 1275 [ 2.874339] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 1275 [ 2.874339] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 1275 [ 2.874339] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 1275 [ 2.874339] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 1275 [ 3.642167] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.643552] ata1.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133 [ 3.643554] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.645319] ata1.00: configured for UDMA/133 [ 4.003154] ata2: SATA link down (SStatus 0 SControl 300) [ 4.462118] ata3: SATA link down (SStatus 0 SControl 300) [ 4.781860] ata4: SATA link down (SStatus 0 SControl 300) [ 5.189832] ata5: SATA link down (SStatus 0 SControl 300) [ 5.509833] ata6: SATA link down (SStatus 0 SControl 300) [ 5.641953] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM350032 MX15 PQ: 0 ANSI: 5 [ 5.641953] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 5.641953] PCI: Setting latency timer of device 0000:04:00.0 to 64 [ 5.641953] sky2 0000:04:00.0: v1.21 addr 0xfebfc000 irq 18 Yukon-EC Ultra (0xb4) rev 3 [ 5.641953] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 19 [ 5.641953] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 19 [ 5.705947] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fcfff800-fcffffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.710769] sky2 eth0: addr 00:1f:c6:d7:71:4e [ 5.717951] Uniform Multi-Platform E-IDE driver [ 5.717951] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 5.717951] NFORCE-MCP77: 0000:00:06.0 (rev a1) UDMA133 controller [ 5.717951] NFORCE-MCP77: IDE controller (0x10de:0x0759 rev 0xa1) at PCI slot 0000:00:06.0 [ 5.717951] NFORCE-MCP77: not 100% native mode: will probe irqs later [ 5.717951] NFORCE-MCP77: BIOS didn't set cable bits correctly. Enabling workaround. [ 5.717951] NFORCE-MCP77: IDE port disabled [ 5.717951] ide0: BM-DMA at 0xffa0-0xffa7 [ 5.717951] Probing IDE interface ide0... [ 5.758115] Driver 'sd' needs updating - please use bus_type methods [ 5.758212] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 5.758230] sd 0:0:0:0: [sda] Write Protect is off [ 5.758232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.758261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.758317] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [ 5.758332] sd 0:0:0:0: [sda] Write Protect is off [ 5.758334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.758362] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.758365] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 5.816927] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.452886] hda: HL-DT-STDVD-RAM GH22NP20, ATAPI CD/DVD-ROM drive [ 6.983017] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 6.983177] hda: UDMA/66 mode selected [ 6.983390] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 6.998980] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [ 6.998980] Uniform CD-ROM driver Revision: 3.20 [ 7.069755] PM: Starting manual resume from disk [ 7.098974] kjournald starting. Commit interval 5 seconds [ 7.101224] EXT3-fs: mounted filesystem with ordered data mode. [ 7.181851] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001434cf8] [ 7.938655] udevd version 125 started [ 8.451653] input: Power Button (FF) as /class/input/input2 [ 8.503701] ACPI: Power Button (FF) [PWRF] [ 8.503790] input: Power Button (CM) as /class/input/input3 [ 8.567699] ACPI: Power Button (CM) [PWRB] [ 8.721448] ACPI: WMI: Mapper loaded [ 8.946697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.960784] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.035541] input: PC Speaker as /class/input/input4 [ 9.309453] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 9.309453] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 9.309453] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 9.341352] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 9.589366] input: ImExPS/2 Generic Explorer Mouse as /class/input/input5 [ 10.031731] Adding 5662872k swap on /dev/sda7. Priority:-1 extents:1 across:5662872k [ 10.213022] EXT3 FS on sda1, internal journal [ 11.123633] loop: module loaded [ 12.370923] kjournald starting. Commit interval 5 seconds [ 12.370923] EXT3 FS on sda9, internal journal [ 12.370923] EXT3-fs: mounted filesystem with ordered data mode. [ 12.370924] kjournald starting. Commit interval 5 seconds [ 12.370924] EXT3 FS on sda8, internal journal [ 12.370924] EXT3-fs: mounted filesystem with ordered data mode. [ 12.393036] kjournald starting. Commit interval 5 seconds [ 12.393459] EXT3 FS on sda5, internal journal [ 12.393461] EXT3-fs: mounted filesystem with ordered data mode. [ 12.453072] kjournald starting. Commit interval 5 seconds [ 12.453072] EXT3 FS on sda6, internal journal [ 12.453072] EXT3-fs: mounted filesystem with ordered data mode. [ 13.543788] sky2 eth0: enabling interface [ 15.490605] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 15.689327] NET: Registered protocol family 10 [ 15.689610] lo: Disabled Privacy Extensions [ 16.947801] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00) [ 16.947801] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0x8 [ 16.947801] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xa [ 16.947801] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xc [ 16.947801] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0xe [ 16.947801] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x10 [ 16.947801] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 17.653357] pnp: the driver 'parport_pc' has been registered [ 17.654300] lp: driver loaded but no devices found [ 17.790433] ppdev: user-space parallel port driver [ 17.970312] Clocksource tsc unstable (delta = -241127657 ns) [ 23.398110] nvidia: module license 'NVIDIA' taints kernel. [ 23.665695] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 23.665698] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [SGRU] -> GSI 21 (level, low) -> IRQ 21 [ 23.665705] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 23.665850] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008 [ 24.205471] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 26.318732] eth0: no IPv6 routers present [ 63.968523] CPU0 attaching NULL sched-domain. [ 63.968527] CPU1 attaching NULL sched-domain. [ 63.994874] CPU0 attaching sched-domain: [ 63.994877] domain 0: span 0-1 [ 63.994878] groups: 0 1 [ 63.994881] domain 1: span 0-1 [ 63.994882] groups: 0-1 [ 63.994885] CPU1 attaching sched-domain: [ 63.994886] domain 0: span 0-1 [ 63.994888] groups: 1 0 [ 63.994890] domain 1: span 0-1 [ 63.994891] groups: 0-1

#4

Le network-manager qui traine dans RC2.d peut être un résidu d’une installation passée.
Pour être sur qu’il ne tourne pas, faut regarder les processus :

ps -eaf |grep NetworkManager

Tu peux donner le contenu des fichiers en question, et la fausse ip qui t’es attrbuée au démarrage ?

#5

Salut,

kdenetwork

#6

[quote=“dric64”]Pour être sur qu’il ne tourne pas, faut regarder les processus[/quote]J’ai déjà regardé, no souci de ce coté là !

Voici mon /etc/network/interfaces :[code]# cat /etc/network/interfaces

This file describes the network interfaces available on your system

and how to activate them. For more information, see interfaces(5).

The loopback network interface

auto lo
iface lo inet loopback

The primary network interface

allow-hotplug eth0
iface eth0 inet static
address 192.168.2.13
netmask 255.255.255.0
network 192.168.2.0
broadcast 192.168.2.255
gateway 192.168.2.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.2.1
dns-search home[/code]et l’IP que j’ai à chaque démarrage : 192.168.2.100 !

Mon /etc/resolv.conf :# cat /etc/resolv.conf nameserver 192.168.2.1et l’IP qui est écrite dans ce fichier à chaque démarrage : 192.168.1.1 !

Sinon ggoodluck47 (Salut !) pour kdenetwork, il semble installé : # apt-cache policy kdenetwork kdenetwork: Installé : 4:3.5.10-2 Candidat : 4:3.5.10-2 Table de version : 4:4.3.4-2 0 50 http://ftp.fr.debian.org unstable/main Packages 4:4.3.4-1 0 90 http://ftp.fr.debian.org testing/main Packages *** 4:3.5.10-2 0 990 http://ftp.fr.debian.org stable/main Packages 100 /var/lib/dpkg/status mais pas lancé :ps -eaf |grep kdenetwork root 6623 5506 0 15:09 pts/2 00:00:00 grep kdenetwork et je ne vois pas comment il pourrait l’être :# find / -name kdenetwork /usr/share/doc/kdenetworkje n’ai à priori pas l’exécutable ?!?? :open_mouth:

#7

Re,

Ton premier message :

[quote]# apt-cache policy knetworkmanager
knetworkmanager:
Installé : (aucun)
Candidat : (aucun)
Table de version :[/quote]

Le même sans fautes d’orthographe :

[quote]gerard@glupins:/opt/epsoneplijs-0.4.0$ apt-cache policy kdenetwork
kdenetwork:
Installé : (aucun)
Candidat : 4:4.3.4-2
Table de version :
4:4.4.2-1 0
1 ftp.fr.debian.org experimental/main Packages
4:4.3.4-2 0
990 ftp.fr.debian.org sid/main Packages
4:3.5.10-2 0
500 ftp.fr.debian.org stable/main Packages
[/quote]

#8

Heu… ggoodluck47, c’est moi ou tu n’as pas vu ma réponse… :blush:

[quote=“Eric75”]Sinon ggoodluck47 (Salut !) pour kdenetwork, il semble installé : # apt-cache policy kdenetwork kdenetwork: Installé : 4:3.5.10-2 Candidat : 4:3.5.10-2 Table de version : 4:4.3.4-2 0 50 http://ftp.fr.debian.org unstable/main Packages 4:4.3.4-1 0 90 http://ftp.fr.debian.org testing/main Packages *** 4:3.5.10-2 0 990 http://ftp.fr.debian.org stable/main Packages 100 /var/lib/dpkg/status mais pas lancé :ps -eaf |grep kdenetwork root 6623 5506 0 15:09 pts/2 00:00:00 grep kdenetwork et je ne vois pas comment il pourrait l’être :# find / -name kdenetwork /usr/share/doc/kdenetworkje n’ai à priori pas l’exécutable ?!?? :open_mouth:[/quote]

#9

[quote]README S14avahi-daemon S20nfs-common S20saned S26network-manager S89cron
S05loadcpufreq S19cpufrequtils S20nvidia-glx S23ntp S26network-manager-dispatcher S99kdm
S10rsyslog S20cups S20nvidia-kernel S24dhcdbd S30mpd S99rc.local
S12acpid S20dirmngr S20openbsd-inetd S24hal S89anacron S99rmnologin
S12dbus S20kerneloops S20rsync S26exalt-daemon S89atd S99stop-bootlogd
[/quote]

Les scripts ifupdown et networking suffisent (dans le /etc/rcS.d) pour lancer le network

enleve le S26network* + S24dhcpd pour tester
probablement le S24dhcpd (serveur dhcp alors que tu as juste besoin d’un dhcp client pour une adresse ip: fixe ou attribué)

#10

Salut dchost99,

Malheureusement, les manips que tu m’as indiqué ne résolvent pas mon souci… par contre, ce petit ménage n’a pu que faire du bien à ma petite lenny !
(D’ailleurs à ce propos, où se renseigner pour savoir ce qui est vraiment nécessaire de lancer ou pas à chaque boot ?)

#11

le minimum c’est /sbin/init
le reste …
tu commence par le init PID 1

qui va lancé le script par défaut dans le /etc/rcS.d
et ensuite continuer avec le runlevel par défaut indique dans le /etc/inittab.

Pour éviter de faire un bordel dans le système fait un dossier old
mkdir /etc/rc2.d/old_rc2
mv les_script_à_enlever old_rc2

ce qui a pour effet d’éviter le lancement des scripts au démarrage

de cette manière tu évite de désinstaller (avec le dépendances …)

S20openbsd-inetd ?

#12

Si ton problème persiste, un petit log de démarrage permettrait d’y voir plus clair dans tout ce qui se lance au boot :

cat /var/log/boot

:006

#13

Avec un peu de retard : :blush: # cat /var/log/boot Sat May 8 11:04:05 2010: . Sat May 8 11:04:05 2010: Setting preliminary keymap...done. Sat May 8 11:04:05 2010: Setting the system clock. Sat May 8 11:04:05 2010: Activating swap...done. Sat May 8 11:04:05 2010: Checking root file system...fsck 1.41.3 (12-Oct-2008) Sat May 8 11:04:05 2010: /dev/sda1: clean, 23737/377504 files, 526776/1534176 blocks Sat May 8 11:04:05 2010: done. Sat May 8 11:04:05 2010: Setting the system clock. Sat May 8 11:04:05 2010: Cleaning up ifupdown.... Sat May 8 11:04:05 2010: Loading kernel modules...done. Sat May 8 11:04:05 2010: Checking file systems...fsck 1.41.3 (12-Oct-2008) Sat May 8 11:04:05 2010: /dev/sda9: clean, 250007/28983296 files, 102066623/115933064 blocks Sat May 8 11:04:05 2010: /dev/sda8: clean, 29/98392 files, 36729/393560 blocks Sat May 8 11:04:05 2010: /dev/sda5: clean, 138926/869184 files, 837469/3532284 blocks Sat May 8 11:04:05 2010: /dev/sda6: clean, 8755/183264 files, 188707/732957 blocks Sat May 8 11:04:05 2010: done. Sat May 8 11:04:05 2010: Setting kernel variables (/etc/sysctl.conf)...done. Sat May 8 11:04:05 2010: Mounting local filesystems...done. Sat May 8 11:04:05 2010: Activating swapfile swap...done. Sat May 8 11:04:06 2010: Setting up networking.... Sat May 8 11:04:06 2010: Configuring network interfaces...done. Sat May 8 11:04:06 2010: Starting portmap daemon.... Sat May 8 11:04:06 2010: Starting NFS common utilities: statd. Sat May 8 11:04:06 2010: Setting console screen modes and fonts. Sat May 8 11:04:06 2010: ^[]R^[[9;30]^[[14;30]Setting up console font and keymap...done. Sat May 8 11:04:08 2010: Setting up ALSA...done. Sat May 8 11:04:08 2010: INIT: Entering runlevel: 2 Sat May 8 11:04:08 2010: Loading cpufreq kernel modules...done (powernow-k8). Sat May 8 11:04:08 2010: Starting enhanced syslogd: rsyslogd. Sat May 8 11:04:08 2010: Starting ACPI services.... Sat May 8 11:04:08 2010: Starting system message bus: dbus. Sat May 8 11:04:08 2010: Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. Sat May 8 11:04:09 2010: CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...CPU1...done. Sat May 8 11:04:09 2010: Starting Common Unix Printing System: cupsd. Sat May 8 11:04:09 2010: Starting DirMngr: dirmngr. Sat May 8 11:04:09 2010: Starting kerneloops: Sat May 8 11:04:09 2010: Starting NFS common utilities: statd. Sat May 8 11:04:10 2010: saned disabled; edit /etc/default/saned Sat May 8 11:04:10 2010: Starting NTP server: ntpd. Sat May 8 11:04:10 2010: Starting Hardware abstraction layer: hald. Sat May 8 11:04:11 2010: Starting network connection manager: exalt-daemon. Sat May 8 11:04:11 2010: Starting Music Player Daemon: mpd. Sat May 8 11:04:12 2010: Starting anac(h)ronistic cron: anacron. Sat May 8 11:04:12 2010: Starting deferred execution scheduler: atd. Sat May 8 11:04:12 2010: Starting periodic command scheduler: crond. Sat May 8 11:04:12 2010: Starting K Display Manager: kdm. Sat May 8 11:04:12 2010:
J’ai l’impression que j’ai trouvé le coupable :Sat May 8 11:04:11 2010: Starting network connection manager: exalt-daemon. :smiling_imp:

Il existe un (des ?) fichier(s) de config de cet exalt (à la noix) parce que j’ai rien trouvé sur le net à ce sujet ?

#14

Ouaip, je crois aussi. :041
Installe et lance sysv-rc-conf, et tu dois pouvoir décocher ce démon de tous les runlevel, comme ca il se lancera plus. SInon, y a l’air d’y avoir un fichier de conf ici : /etc/dbus-1/system.d/exalt.conf

#15

[code]$ cat /etc/dbus-1/system.d/exalt.conf

            <allow send_destination="org.e.Exalt"/>
            <allow send_interface="org.e.Exalt"/>
    </policy>
    <policy at_console="true">
            <allow send_destination="org.e.Exalt"/>
            <allow send_interface="org.e.Exalt"/>
    </policy>
    <policy context="default">
            <!-- <deny own="org.e.Exalt"/> -->
            <!-- <deny send_destination="org.e.Exalt"/> -->
            <!-- <deny send_interface="org.e.Exalt"/> -->
            <allow own="org.e.Exalt"/>
            <allow send_destination="org.e.Exalt"/>
            <allow send_interface="org.e.Exalt"/>
    </policy>

[/code]
:119

Ça ne semble pas être un fichier de config, ça ?

Sinon, ouais, j’avais pensé aussi à le dégager des runlevels :# update-rc.d -f exalt-daemon removemais je m’étais dit qu’il y avait peut-être une solution moins radicale… :mrgreen:

:arrow_right: J’attends la fin de mon téléchargement et je reboote pour voir…

#16

Ouaip, pas terrible ce fichier de conf… S’il n’est pas dans /etc/, ou dans /etc/exalt(quelquechose).conf/ je ne sais pas :mrgreen:

Ca n’est pas radical : le supprimer serait radical :005
Après si tu veux t’en servir, faudra trouver une doc pour le configurer… Mais à mon avis, y a plus connu et plus documenté comme gestionnaire de connexion.