Souris TnB qui ne fonctionne pas

Support Debian
Tags: #<Tag:0x00007f2c9b85c658>
#1

Bonjour,
Sur ma distribution Debian 11, j’ai voulu installer une souris sans fil TnB et elle fonctionne « parfois » ???
J’ai testé une souris logitech et une itworks qui fonctionne normalement.
lsusb donne pour cette souris TnB :
248a:8514 Maaster Wireless Receiver
alors que pour la souris itworks par exemple lsusb donne :
040b:2012 Weltrend Semiconductor 2.4 GHz Mouse

La souris ne fonctionne JAMAIS si le dongle est présent à l’allumage de l’ordinateur.
Mais parfois (et je dis bien parfois) le fait de retirer et de remettre le dongle dans la prise USB permet le fonctionnement. Mais c’est très très aléatoire, en fait on ne peut absolument pas compter dessus.
xserver-xorg-input-mouse est installé
solaar est installé
Avez vous eu ce problème ?
Faut-il installer un driver spécifique ?
Merci pour les réponses …
Cordialement.

#2

Bonjour,
il faudrait le détail de la partie lsusb.
De même quand tu la branche cela induit des traces dans dmesg et probablement aussi dans les logs.

Pour les récupérer dans une console tu lances en root: journalctl -f.
Tu ouvres une autre console.
Tu connecte la clef TnB, après quoi tu lance dans la deuxième console: dmesg. A la fin de celui-ci tu dois avoir des traces liées à ta clé.
Et dans la première console les logs systèmes dans journald.
Peux tu ensuite nous donner les deux résultat (juste les parties après branchement de la clé pour les deux).

#3

Voilà :
lsusb Sans le dongle usb

jean-jacques@PC-184:~$ lsusb
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
Bus 001 Device 003: ID 04f2:b209 Chicony Electronics Co., Ltd WebCam
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

avec le dongle usb

jean-jacques@PC-184:~$ lsusb
Bus 002 Device 004: ID 248a:8514 Maxxter Wireless Receiver
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
Bus 001 Device 003: ID 04f2:b209 Chicony Electronics Co., Ltd WebCam
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

journalctl -f a donné :

déc. 18 18:57:36 PC-184 sudo[3467]: jean-jacques : TTY=pts/0 ; PWD=/home/jean-jacques ; USER=root ; COMMAND=/usr/bin/journalctl -f
déc. 18 18:57:36 PC-184 sudo[3467]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=1000)
déc. 18 18:57:46 PC-184 kernel: usb 2-1.2: new full-speed USB device number 6 using ehci-pci
déc. 18 18:57:46 PC-184 kernel: usb 2-1.2: New USB device found, idVendor=248a, idProduct=8514, bcdDevice= 1.00
déc. 18 18:57:46 PC-184 kernel: usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
déc. 18 18:57:46 PC-184 kernel: usb 2-1.2: Product: Wireless Receiver
déc. 18 18:57:46 PC-184 kernel: usb 2-1.2: Manufacturer: Telink
déc. 18 18:57:46 PC-184 kernel: input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:248A:8514.0007/input/input27
déc. 18 18:57:46 PC-184 kernel: input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:248A:8514.0007/input/input28
déc. 18 18:57:46 PC-184 kernel: input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:248A:8514.0007/input/input29
déc. 18 18:57:46 PC-184 kernel: hid-generic 0003:248A:8514.0007: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1.2/input0
déc. 18 18:57:46 PC-184 kernel: input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:248A:8514.0008/input/input30
déc. 18 18:57:46 PC-184 kernel: hid-generic 0003:248A:8514.0008: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.2/input1
déc. 18 18:57:46 PC-184 mtp-probe[3472]: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2"
déc. 18 18:57:46 PC-184 mtp-probe[3472]: bus: 2, device: 6 was not an MTP device
déc. 18 18:57:46 PC-184 upowerd[1052]: treating change event as add on /sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2
déc. 18 18:57:46 PC-184 systemd-logind[586]: Watching system buttons on /dev/input/event8 (Telink Wireless Receiver Consumer Control)
déc. 18 18:57:46 PC-184 systemd-logind[586]: Watching system buttons on /dev/input/event9 (Telink Wireless Receiver System Control)
déc. 18 18:57:46 PC-184 systemd-logind[586]: Watching system buttons on /dev/input/event10 (Telink Wireless Receiver)
déc. 18 18:57:46 PC-184 mtp-probe[3497]: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2"
déc. 18 18:57:46 PC-184 mtp-probe[3497]: bus: 2, device: 6 was not an MTP device

dmesg a donné

[ 1798.953559] usb 2-1.2: New USB device found, idVendor=248a, idProduct=8514, bcdDevice= 1.00
[ 1798.953563] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1798.953566] usb 2-1.2: Product: Wireless Receiver
[ 1798.953568] usb 2-1.2: Manufacturer: Telink
[ 1798.960274] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:248A:8514.0009/input/input31
[ 1799.019855] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:248A:8514.0009/input/input32
[ 1799.020064] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:248A:8514.0009/input/input33
[ 1799.020371] hid-generic 0003:248A:8514.0009: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1.2/input0
[ 1799.022963] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:248A:8514.000A/input/input34
[ 1799.080048] hid-generic 0003:248A:8514.000A: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.2/input1

Le plus incroyable est que suite à ces manipulations la souris s’est mise à fonctionner !

#4

Depuis 3 allumages et la souris fonctionne même au démarrage,
il serait intéressant de comprendre pourquoi afficher les journaux et voir les messages du noyau peu faire ça !
il aurait une IA dans la distribution Debian ? :face_with_monocle:

#5

peut etre un problème de connexion, un emise à jour qui s’est i nstallée depuis…
Il y avait aussi u ne confusion entre maaster et maaxter :wink:

#6

Et bien non, cela ne fonctionne plus ce matin … et pas moyen de faire refonctionner en branchant et débranchant.

Incompréhensible !
Y a t il une solution ???

#7

si tu ne nous fourni pas les logs quand ça ne marche pas, ça va être difficile :slight_smile:

#8

Voici ce que donne lsusb :

jean-jacques@jeanjacques-laptop:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 001 Device 004: ID 8087:07dc Intel Corp. Bluetooth wireless interface
Bus 001 Device 005: ID 248a:8514 Maxxter Wireless Receiver
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
#9

Quand je fais l"opération avec journalctl -f et dmesg et que je branche le dongle la souris se met à fonctionner .
Si je me déconnecte et me reconnecte la souris fonctionne.
En gros avoir le dongle branché sur l"ordinateur avant de l’allumer ne permet jamais de la faire fonctionner
Brancher le dongle alors que l’environnement de bureau est actif et taper « sudo dmesg » dans un terminal permet de la faire fonctionner.
Mais si je débranche le dongle et si je le rebranche dans le même port USB cela ne refonctionne pas même si je relance « sudo dmesg », par contre si je change de port USB et que je tape « sudo dmesg » la souris (re)fonctionne.
Si j’éteint physiquement l’ordinateur (plus de voyants allumé) et que je le « réallume » la souris ne fonctionne pas.
J’ai exactement le même fonctionnement avec cette souris TNB et un ordinateur MSI avec Ubuntu 24:04 (bureau Cinnamon).
Pour fonctionner les dongles des autres souris qu’on m’a prêtées ne nécessitent pas d"être branché et débranché lorsque l’environnement de bureau est établi. C’est d"ailleurs assez compliqué avec l’écran d’accueil sans la souris !
le contenu de sudo dmesg suit dans un autre message…

#10

La totalité de sudo dmesg qui fait fonctionner’ la souris sur la distribution Debian fait plus de 62000 caractères voici la fin qui parle de NEW USB DEVICE :

jean-jacques@PC-184:~$ sudo dmesg

[    5.235780] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    5.235803] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4405800
[    5.243535] ahci 0000:00:1f.2: version 3.0
[    5.243881] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    5.243926] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    5.243930] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    5.254776] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    5.254933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    5.254936] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.254939] usb usb2: Product: EHCI Host Controller
[    5.254941] usb usb2: Manufacturer: Linux 5.10.0-33-686-pae ehci_hcd
[    5.254943] usb usb2: SerialNumber: 0000:00:1d.0
[    5.255178] hub 2-0:1.0: USB hub found
[    5.255193] hub 2-0:1.0: 2 ports detected
[    5.255681] scsi host0: ahci
[    5.255971] scsi host1: ahci
[    5.257163] scsi host2: ahci
[    5.257376] scsi host3: ahci
[    5.257453] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 24
[    5.257456] ata2: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405180 irq 24
[    5.257457] ata3: DUMMY
[    5.257458] ata4: DUMMY
[    5.263181] Broadcom BCM57780 100:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=100:01, irq=POLL)
[    5.263574] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address b8:70:f4:b2:11:47
[    5.263577] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    5.263578] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    5.307951] pci 0000:00:00.0: Intel HD Graphics Chipset
[    5.307971] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    5.308542] pci 0000:00:00.0: detected 131072K stolen memory
[    5.308619] i915 0000:00:02.0: vgaarb: deactivate vga console
[    5.309196] Console: switching to colour dummy device 80x25
[    5.310791] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.352922] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[    5.353978] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    5.498897] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.510816] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.570425] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    5.571788] ata1.00: ATA-8: Hitachi HTS547550A9E384, JE3OA60A, max UDMA/133
[    5.571797] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    5.573373] ata1.00: configured for UDMA/133
[    5.574055] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54755 A60A PQ: 0 ANSI: 5
[    5.655639] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    5.655646] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.656209] hub 1-1:1.0: USB hub found
[    5.656367] hub 1-1:1.0: 6 ports detected
[    5.667461] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    5.667468] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.667762] hub 2-1:1.0: USB hub found
[    5.667939] hub 2-1:1.0: 8 ports detected
[    5.674970] acpi device:03: registered as cooling_device4
[    5.675239] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    5.687958] fbcon: i915drmfb (fb0) is primary device
[    5.890487] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.892090] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0AS, 1.00, max UDMA/100
[    5.894660] ata2.00: configured for UDMA/100
[    5.901108] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A0AS  1.00 PQ: 0 ANSI: 5
[    5.946832] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    5.958786] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[    6.072711] usb 2-1.3: New USB device found, idVendor=248a, idProduct=8514, bcdDevice= 1.00
[    6.072715] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.072719] usb 2-1.3: Product: Wireless Receiver
[    6.072722] usb 2-1.3: Manufacturer: Telink
[    6.082061] hid: raw HID events driver (C) Jiri Kosina
[    6.168078] usb 1-1.1: New USB device found, idVendor=04f2, idProduct=b209, bcdDevice=82.57
[    6.168081] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    6.168083] usb 1-1.1: Product: WebCam
[    6.168085] usb 1-1.1: Manufacturer: Chicony Electronics Co., Ltd.
[    6.254877] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    6.375753] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0138, bcdDevice=38.82
[    6.375758] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.375761] usb 1-1.2: Product: USB2.0-CRW
[    6.375764] usb 1-1.2: Manufacturer: Generic
[    6.375767] usb 1-1.2: SerialNumber: 20090516388200000
[    6.389193] usbcore: registered new interface driver usb-storage
[    6.483303] Console: switching to colour frame buffer device 170x48
[    6.504308] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[    6.522816] tg3 0000:01:00.0 enp1s0: renamed from eth0
[    6.523024] usbcore: registered new interface driver uas
[    6.525591] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[    6.529607] scsi host4: usb-storage 1-1.2:1.0
[    6.529739] usbcore: registered new interface driver ums-realtek
[    6.533934] usbcore: registered new interface driver usbhid
[    6.533936] usbhid: USB HID core driver
[    6.537289] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:248A:8514.0001/input/input8
[    6.537470] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:248A:8514.0001/input/input9
[    6.539108] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    6.539112] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    6.539131] sd 0:0:0:0: [sda] Write Protect is off
[    6.539134] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.539164] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.581728] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    6.581734] cdrom: Uniform CD-ROM driver Revision: 3.20
[    6.594950] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:248A:8514.0001/input/input10
[    6.595009] hid-generic 0003:248A:8514.0001: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input0
[    6.595244] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:248A:8514.0002/input/input11
[    6.629251]  sda: sda1 sda2 < sda5 >
[    6.648202] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.658970] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    6.659177] hid-generic 0003:248A:8514.0002: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input1
[    7.219549] PM: Image not found (code -22)
[    7.554303] scsi 4:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
[    8.291433] sd 4:0:0:0: [sdb] 62355456 512-byte logical blocks: (31.9 GB/29.7 GiB)
[    8.292608] sd 4:0:0:0: [sdb] Write Protect is off
[    8.292613] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    8.294187] sd 4:0:0:0: [sdb] No Caching mode page found
[    8.294301] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    8.312316]  sdb: sdb1
[    8.334093] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    8.488625] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.856414] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   10.442798] systemd[1]: Inserted module 'autofs4'
[   10.670776] systemd[1]: systemd 247.3-7+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[   10.690949] systemd[1]: Detected architecture x86.
[   10.753878] systemd[1]: Set hostname to <PC-184>.
[   11.534791] random: crng init done
[   12.783358] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[   13.367222] systemd[1]: Queued start job for default target Graphical Interface.
[   13.369776] systemd[1]: Created slice system-getty.slice.
[   13.370195] systemd[1]: Created slice system-modprobe.slice.
[   13.370550] systemd[1]: Created slice User and Session Slice.
[   13.370718] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   13.371024] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   13.371169] systemd[1]: Reached target User and Group Name Lookups.
[   13.371229] systemd[1]: Reached target Slices.
[   13.411547] systemd[1]: Listening on RPCbind Server Activation Socket.
[   13.412070] systemd[1]: Listening on Syslog Socket.
[   13.412533] systemd[1]: Listening on fsck to fsckd communication Socket.
[   13.412774] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   13.413513] systemd[1]: Listening on Journal Audit Socket.
[   13.413940] systemd[1]: Listening on Journal Socket (/dev/log).
[   13.414475] systemd[1]: Listening on Journal Socket.
[   13.415462] systemd[1]: Listening on udev Control Socket.
[   13.415906] systemd[1]: Listening on udev Kernel Socket.
[   13.418402] systemd[1]: Mounting Huge Pages File System...
[   13.420499] systemd[1]: Mounting POSIX Message Queue File System...
[   13.422479] systemd[1]: Mounting RPC Pipe File System...
[   13.424756] systemd[1]: Mounting Kernel Debug File System...
[   13.427001] systemd[1]: Mounting Kernel Trace File System...
[   13.427238] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[   13.434406] systemd[1]: Starting Set the console keyboard layout...
[   13.436577] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   13.437940] systemd[1]: Starting Load Kernel Module configfs...
[   13.439725] systemd[1]: Starting Load Kernel Module drm...
[   13.441466] systemd[1]: Starting Load Kernel Module fuse...
[   13.643730] fuse: init (API version 7.32)
[   13.696876] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   13.697040] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[   13.702023] systemd[1]: Starting Journal Service...
[   13.725305] systemd[1]: Starting Load Kernel Modules...
[   13.726425] systemd[1]: Starting Remount Root and Kernel File Systems...
[   13.727580] systemd[1]: Starting Coldplug All udev Devices...
[   13.730556] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   13.731096] systemd[1]: modprobe@configfs.service: Succeeded.
[   13.731384] systemd[1]: Finished Load Kernel Module configfs.
[   13.731781] systemd[1]: modprobe@drm.service: Succeeded.
[   13.732061] systemd[1]: Finished Load Kernel Module drm.
[   13.732458] systemd[1]: modprobe@fuse.service: Succeeded.
[   13.732736] systemd[1]: Finished Load Kernel Module fuse.
[   13.734106] systemd[1]: Mounting FUSE Control File System...
[   13.735338] systemd[1]: Mounting Kernel Configuration File System...
[   13.835494] systemd[1]: Mounted Huge Pages File System.
[   13.835721] systemd[1]: Mounted POSIX Message Queue File System.
[   13.835904] systemd[1]: Mounted Kernel Debug File System.
[   13.836088] systemd[1]: Mounted Kernel Trace File System.
[   13.836276] systemd[1]: Mounted FUSE Control File System.
[   13.836456] systemd[1]: Mounted Kernel Configuration File System.
[   13.912554] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   13.914318] systemd[1]: Finished Remount Root and Kernel File Systems.
[   13.952998] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   13.953110] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[   13.954459] systemd[1]: Starting Load/Save Random Seed...
[   13.955843] systemd[1]: Starting Create System Users...
[   14.055125] systemd[1]: Started Journal Service.
[   14.131431] systemd-journald[242]: Received client request to flush runtime journal.
[   14.167499] RPC: Registered named UNIX socket transport module.
[   14.167504] RPC: Registered udp transport module.
[   14.167507] RPC: Registered tcp transport module.
[   14.167509] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.475755] lp: driver loaded but no devices found
[   14.600445] ppdev: user-space parallel port driver
[   17.724086] audit: type=1400 audit(1734715501.221:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=293 comm="apparmor_parser"
[   17.802668] audit: type=1400 audit(1734715501.297:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=290 comm="apparmor_parser"
[   17.815028] audit: type=1400 audit(1734715501.313:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=294 comm="apparmor_parser"
[   17.852951] audit: type=1400 audit(1734715501.349:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=292 comm="apparmor_parser"
[   17.852964] audit: type=1400 audit(1734715501.349:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=292 comm="apparmor_parser"
[   17.946154] audit: type=1400 audit(1734715501.441:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session" pid=289 comm="apparmor_parser"
[   17.946167] audit: type=1400 audit(1734715501.441:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm/lightdm-guest-session//chromium" pid=289 comm="apparmor_parser"
[   18.026276] audit: type=1400 audit(1734715501.521:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=298 comm="apparmor_parser"
[   18.055573] audit: type=1400 audit(1734715501.553:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=296 comm="apparmor_parser"
[   18.074016] audit: type=1400 audit(1734715501.569:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=295 comm="apparmor_parser"
[   21.429603] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   21.430091] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   21.657884] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   21.657950] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   21.658015] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   21.789164] at24 0-0050: supply vcc not found, using dummy regulator
[   21.791776] at24 0-0050: 256 byte spd EEPROM, read-only
[   21.807517] acer_wmi: Acer Laptop ACPI-WMI Extras
[   21.807554] acer_wmi: Function bitmap for Communication Button: 0x1
[   21.810632] input: Acer WMI hotkeys as /devices/virtual/input/input12
[   21.812453] iTCO_vendor_support: vendor-support=0
[   21.837510] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   21.837579] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   21.837750] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   21.846663] input: PC Speaker as /devices/platform/pcspkr/input/input13
[   22.146973] ACPI: AC Adapter [AC] (off-line)
[   22.393736] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   22.396059] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[   22.398336] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[   22.400296] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   22.402134] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[   22.792022] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   22.915518] mc: Linux media interface: v0.10
[   22.994684] videodev: Linux video capture interface: v2.00
[   23.156038] ath: phy0: Enable LNA combining
[   23.158592] ath: phy0: ASPM enabled: 0x43
[   23.158597] ath: EEPROM regdomain: 0x65
[   23.158599] ath: EEPROM indicates we should expect a direct regpair map
[   23.158603] ath: Country alpha2 being used: 00
[   23.158605] ath: Regpair used: 0x65
[   23.161213] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   23.162112] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xc335223f, irq=17
[   23.308981] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[   23.457138] uvcvideo: Found UVC 1.00 device WebCam (04f2:b209)
[   23.457448] uvcvideo: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[   23.464580] input: WebCam: WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input14
[   23.464839] usbcore: registered new interface driver uvcvideo
[   23.464843] USB Video Class driver (1.1.1)
[   23.510224] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[   23.518336] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[   23.572408] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops __SCT__tp_func_i915_context_free [i915])
[   23.766137] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   23.766144] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   23.766149] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   23.766153] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   23.766156] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   23.766160] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   23.766164] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   23.790151] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   23.790401] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   23.790628] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   30.070823] Adding 998396k swap on /dev/sda5.  Priority:-2 extents:1 across:998396k FS
[   31.599835] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
[   47.484237] tg3 0000:01:00.0 enp1s0: Link is down
[   51.046225] kauditd_printk_skb: 17 callbacks suppressed
[   51.046229] audit: type=1400 audit(1734715534.541:29): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=646 comm="cupsd" capability=12  capname="net_admin"
[   51.836978] audit: type=1400 audit(1734715535.333:30): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=684 comm="cups-browsed" capability=23  capname="sys_nice"
[   53.783931] FS-Cache: Loaded
[   53.851139] Key type dns_resolver registered
[   54.220729] FS-Cache: Netfs 'cifs' registered for caching
[   54.341094] Key type cifs.spnego registered
[   54.341107] Key type cifs.idmap registered
[   54.341995] CIFS: Attempting to mount //192.168.1.1/IOMEGA_HDD
[   54.342058] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers
[   54.345523] CIFS: VFS: Error connecting to socket. Aborting operation.
[   54.349059] CIFS: VFS: cifs_mount failed w/return code = -101
[   99.694008] wlp2s0: authenticate with ac:cf:7b:4d:01:20
[   99.711767] wlp2s0: send auth to ac:cf:7b:4d:01:20 (try 1/3)
[   99.713734] wlp2s0: authenticated
[   99.715098] wlp2s0: associate with ac:cf:7b:4d:01:20 (try 1/3)
[   99.723487] wlp2s0: RX AssocResp from ac:cf:7b:4d:01:20 (capab=0x1411 status=0 aid=2)
[   99.723680] wlp2s0: associated
[   99.723869] ath: EEPROM regdomain: 0x80fa
[   99.723873] ath: EEPROM indicates we should expect a country code
[   99.723876] ath: doing EEPROM country->regdmn map search
[   99.723879] ath: country maps to regdmn code: 0x37
[   99.723883] ath: Country alpha2 being used: FR
[   99.723886] ath: Regpair used: 0x37
[   99.723890] ath: regdomain 0x80fa dynamically updated by country element
[  100.004597] cryptd: max_cpu_qlen set to 1000
[  100.767711] wlp2s0: Limiting TX power to 20 (20 - 0) dBm as advertised by ac:cf:7b:4d:01:20
[  100.768286] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  112.263213] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  219.766047] usb 2-1.3: USB disconnect, device number 3
[  224.082345] usb 2-1.3: new full-speed USB device number 4 using ehci-pci
[  224.196184] usb 2-1.3: New USB device found, idVendor=248a, idProduct=8514, bcdDevice= 1.00
[  224.196189] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  224.196192] usb 2-1.3: Product: Wireless Receiver
[  224.196194] usb 2-1.3: Manufacturer: Telink
[  224.201807] input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:248A:8514.0003/input/input19
[  224.258646] input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:248A:8514.0003/input/input20
[  224.258857] input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:248A:8514.0003/input/input21
[  224.259139] hid-generic 0003:248A:8514.0003: input,hidraw0: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input0
[  224.261737] input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/0003:248A:8514.0004/input/input22
[  224.318775] hid-generic 0003:248A:8514.0004: input,hidraw1: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:00:1d.0-1.3/input1
#11

Personnellement, je changerais de souris.

1 J'aime